DFRobot Gravity - colorful RGB LED module

Index: DFR-09382 EAN: 5903351243636

LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the LEDs. The module requires no programming, just turn on the power to the LED.

DFRobot Gravity - colorful RGB LED module
€2.50
€2.03 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot

Description

LED module lights up in the seven colors of the rainbow. The controller randomly chooses the color. Modules may be connected in a cascade, one interface can control all the LEDs. The module requires no programming, just turn on the power to the LED.

Pin

Description

Signal The signal line
VCC Supply voltage from 3.3 V to 5 V

GND

The ground of the system

 

Features

  • Input voltage: 3.3 V - 5 V
  • Current: 25 mA max
  • Connector type: digital 3 - pin Gravity
  • Dimensions: 25 x 16 mm
  • Weight: 16 g

Set includes

  • 1 x LED module Gravity
  • 1 x cable PH 2.0 - 3 - pin (80 cm)
  • 1 x cable Gravity 2.54 mm XH 3 - pin

 

LED - type WS2812B
LED lens clear
LED wavelength RGB
Package width 5.5 cm
Package height 2.5 cm
Package depth 6 cm
Package weight 0.014 kg

Adam

03/13/23

Question: Good day, Can you please give some guidance on how to connect this particular module to the GPIO of the Raspberry Pi and into which pin what wire, if I would like to power the diode with 3.3v? He is a novice, and I would not like to damage the minicomputer by incorrect connection. Thank you in advance for your answer. Regards.
Answer: You can power the module with batteries, as shown in the diagram, and control the power supply with, for example, a relay connected to the Raspberry Pi:
https://botland.com.pl/przekazniki-przekazniki-arduino/1997-modul-przekaznika-1-kanal-z-optoizolacja-styki-10a-250vac-cewka-5v-5904422359096.html
https://botland.com.pl/content/129-sterowanie-przekaznikiem-za-pomoca-raspberrypi
Adam

03/13/23

Question: Good day, does this module work with Raspberry Pi i.e. will I be able to power the diode from the GPIO pins of the Raspberry using the attached cable? If so, in case both 5v pins are occupied e.g.: by a fan, will there then still be free pins to connect the board? Thank you in advance for your answer. Regards.
Answer: The selected module can be connected to the Raspberry Pi.
You can duplicate the Raspberry Pi's 5 V pin using, for example, an overlay: https://botland.com.pl/raspberry-pi-hat-ekspandery-wyprowadzen/2816-plytka-prototypowa-tht-raspberry-pi-4b3b3b2b-5904422365363.html

Product reviews

DFRobot Gravity - colorful RGB LED module

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Reviews:

Andreas 06.05.2023 Confirmed purchase Translated review
Before.

Customers who bought this product also bought:

Products from the same category: