- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Gravity modules - Strona 5
Loading...
DFRobot Gravity - analog signal isolator
The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
DFRobot Gravity: module with EEPROM memory - I2C - 256kB
Module EEPROM from series Gravity, allows for memory expansion on the data with 256 KB in Arduino. Communication via the I2S interface. It saves data during a power outage. The...
Index: DFR-13242
Index: DFR-13242
DFRobot Gravity - vibration motor module
Module from the Gravity series with vibration motor for Arduino controlled with the PWM signal, low and high status. The supply voltage is 5 V.
Index: DFR-11287
Index: DFR-11287
Gravity Temperature & Humidity Sensor - DHT20 - DFRobot SEN0497
Precise temperature and humidity sensor equipped with DHT20 chip. Factory calibrated, has a connector compatible with the Gravity series. Product manufactured by DFRobot, is...
Index: DFR-20376
Index: DFR-20376
Module with red backlight, is equipped with a Gravity connector ideal for working with Arduino. The LEd glows, when the pin signal switches to a low state.
Index: DFR-11271
Index: DFR-11271
Gravity - I2C/UART connection cable set - 4-pin male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0898
A set consisting of 10x connection cables with I2C / UART communication, equipped with a connector compatible with the Gravity standard and a 4-pin PH2.0 male goldpin...
Index: DFR-21235
Index: DFR-21235
Gravity - Air Quality Sensor - SGP40 - DFRobot SEN0394
Air quality sensor manufactured by DFRobot. It has a built-in SGP40 chip (introduced by the well-known Sensirion company), which measures the VOC air quality in the range...
Index: DFR-19375
Index: DFR-19375
Gravity - rainfall sensor - I2C and UART - DFRobot SEN0575
The Gravity rainfall sensor from DFRobot is a reliable and convenient device for precise measurements. Its design is based on a container with inclined walls that allow...
Index: DFR-23474
Index: DFR-23474
DFRobot Gravity Self-Locking Switch
Digital bistable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules. Each press changes its status to opposite.
Index: DFR-06290
Index: DFR-06290
DFRobot Gravity v2.0 - relay 1 channel - 277VAC / 16A contacts - 5V coil
Module with relay that allow for the control of the actuators through the ports of the microcontroller. The kit includes a cable adapted to DFRobot IO Expansion Shield.
Index: DFR-11262
Index: DFR-11262
Gravity - Digital 360 Tilt Sensor for Arduino - DFRobot DFR0830
Gravity - Digital 360° Tilt Sensor is a tilt sensor manufactured by DFRobot. It has a metal ball that moves along an internal track - under the influence of gravity. Using...
Index: DFR-20371
Index: DFR-20371
DFRobot Gravity - Geiger Counter Module Ionizing Radiation Detector - DFRobot SEN0463
The Geiger counter allows you to detect ionizing radiation in the surrounding environment. The DFRobot module from the Gravity series is based on a Geiger M4011 meter lamp ,...
Index: DFR-21232
Index: DFR-21232
Gravity - 3-axis magnetometer - BMM150 - I2C - DFRobot SEN0529
DFRobot three-axis magnetometer with Bosh BMM150 system based on FlipCore technology. The module allows you to measure the magnetic field in three perpendiculars in the...
Index: DFR-22276
Index: DFR-22276
DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12363
Index: DFR-12363
Gravity - RGB LED button - DFRobot DFR0991
Module with a button from DFRobot. Thanks to the built-in RGB LED, the button is illuminated in different colors . The module has a built-in Gravity connector with an I2C...
Index: DFR-22461
Index: DFR-22461
Gravity - Screw Shield V2 - overlay with screw connectors for Arduino - DFRobot DFR0171
Gravity - Screw Shield V2 is a Shield overlay for Arduino that acts as a lead expander . It extends the Arduino with screw connectors, so you can attach wires to them for a...
Index: DFR-19900
Index: DFR-19900
Gravity - analog AC current sensor - up to 10A - DFRobot SEN0288
An analog sensor from DFRobot that measures the AC current flowing in a wire without cutting it. The measurement range is up to 10 A , and the measurement itself is done...
Index: DFR-19898
Index: DFR-19898
DFRobot Gravity - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used in, for example, in controllers for games. There is the possibility of detecting movement in two...
Index: DFR-11283
Index: DFR-11283
Gravity - IO Shield - extension for FireBeetle M0 and ESP32-E - DFRobot DFR0762
The extension provides a convenient connection between DFRobot Gravity sensors and FireBeetle 2.0 series. It offers the most commonly used ports , including digital,...
Index: DFR-20375
Index: DFR-20375
Gravity: Conductivity Sensor Switch - DFRobot
The module that is able to determine whether the object has an electric conductivity. The maximum detection value is 10 MΩ. After electric conductivity detection, the module...
Index: DFR-08111
Index: DFR-08111
DFRobot Gravity - connection cable - for analog sensors to Arduino - 30cm - 10pcs.
Connection wires with Gravity standard produced by DFRobot. Designed to connect analog peripheral devices (sensors equipped with Gravity connector) with Arduino type...
Index: DFR-19551
Index: DFR-19551
DFRobot Gravity - VL53L0X time-of-flight - distance sensor I2C
Digital proximity sensor performs the measurement with the method of time-of-flight. It operates in the range of from 3 to 200 cm with accuracy of +/- 3%. It communicates via...
Index: DFR-11762
Index: DFR-11762
DFRobot Gravity: Voice Recorder Module
Vioce recorder module based on ISD1820. It has a built-in microphone and a jack connector for speakers or headphones. Built-in functions allow you to record and playback audio...
Index: DFR-07437
Index: DFR-07437
Gravity - snap-on 10A/250VAC magnetic relay - for Arduino and ESP32 - DFRobot DFR0996
Magnetic latching relay 10 A / 250 V AC from DFRobot. Compared to other relays, it is distinguished by the fact that it needs two digital pulse signals to switch the ON /...
Index: DFR-22838
Index: DFR-22838
See also
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules