- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Camera ZeroCam OV5647 5MPx - fisheye 170 deg - for Raspberry Pi Zero
Index: ODS-12756
- Reduced price
- Sale
Gravity modules - Strona 6
Loading...
DFRobot Gravity cables - wires for Gravity and LattePanda sensors 10pcs
Wires are used to connect sensors from Gravity series or actuators with a minicomputer Latte Panda, compatible with most gravitational sensors. They are very simple to connect...
Index: DFR-08829
Index: DFR-08829
Gravity - PM1 / PM2.5 / PM10 Air Quality Sensor - DFRobot SEN0460
The sensor module allows to monitor the purity of the air, measures PM1 / PM2.5 / PM10 . It is equipped with a sensor allowing to detect particles with a diameter above 0.3 μm...
Index: DFR-20678
Index: DFR-20678
DFRobot Gravity - ARK adapter for 4pin Gravity sensors - FIT0511
The adapter is designed for 4-pin sensors, optimized for the connection with the Gravity interface. It has two types of power supplies of 3.3 V and 5 V.
Index: DFR-09967
Index: DFR-09967
The module is equipped with an equalizer MSGEQ7. It a llows you to add audio detection for Arduino sound. It has 7 frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25...
Index: DFR-07443
Index: DFR-07443
Gravity - gesture sensor PAJ7620U2 - DFRobot SEN0315
The PAJ7620U2 based gesture sensor can recognize up to 13 different hand gestures at a distance of 20 cm. The module communicates using the popular I2C interface. It is...
Index: DFR-16576
Index: DFR-16576
Module with green LED, it is equipped with a Gravity connector, it is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11270
Index: DFR-11270
DFRobot Gravity - 2x16 I2C LCD display - gray
LCD display 2x16 characters with backlight in gray color. Communicates via two-wire I2C bus. The set includes a cable adapted to the DFRobot Gravity IO Expansion Shield.
Index: DFR-12364
Index: DFR-12364
Module with blue backlight, equipped with a connector Gravity is ideal for working with Arduino. The LED glows, when the pin signal switches to a low state.
Index: DFR-11269
Index: DFR-11269
DFRobot Gravity FIT0769 - connection cable - for analog sensors to Arduino - 50cm - 10pcs.
A set of Gravity standard compatible connection wires manufactured by DFRobot. Designed to connect analog peripherals (sensors equipped with Gravity connector) with Arduino...
Index: DFR-19548
Index: DFR-19548
Gravity - BME680 I2C environmental sensor - DFRobot SEN0248
A 4-in-1 MEMS environmental sensor equipped with Gravity connector, manufactured by DFRobot. It features an embedded Bosch BME680 chip. The multifunctional module is a...
Index: DFR-19200
Index: DFR-19200
Gravity: GP8101S 1-Channel PWM to 0-5V/10V DAC Module
The GP8101S is a 1-channel digital-to-analog converter (DAC) communicating via a PWM signal. The module offers voltage outputs from 0 V to 5 V or 10 V , making it ideal for...
Index: DFR-24116
Index: DFR-24116
DFRobot Gravity - connection cable - for digital sensors to Arduino - 30cm - 10pcs.
Connection wires with Gravity standard produced by DFRobot. Designed to connect digital peripherals - sensors equipped with Gravity connector - with Arduino microcontroller....
Index: DFR-19552
Index: DFR-19552
Gravity - MAX30102 Heart Rate and Oximeter Sensor - DFRobot SEN0518
The heart rate sensor module and pulse oximeter is based on the MAX30102 chip. It is powered by 3.3 V / 5 V . The MAX30102 uses PPG (PhotoPlethysmoGraphy) data for...
Index: DFR-20974
Index: DFR-20974
Gravity - UV ultraviolet light sensor - LTR390-UV-01 - I2C/UART - DFRobot SEN0540
Ultraviolet UV light sensor manufactured by DFRobot. It is equipped with the LTR390-UV-01 system that allows the measurement of radiation with a wavelength in the range from...
Index: DFR-22672
Index: DFR-22672
Gravity - 1 kg (10 N) digital pressure sensor - HX711 - Build a scale kit - DFRobot KIT0176
A set of elements for self-assembly , which allow to make an electronic balance . The kit contains a digital pressure sensor, in the form of a strain gauge bar, detecting...
Index: DFR-20415
Index: DFR-20415
DFRobot Gravity - adapter for the GP2Y1010AU0F dust sensor
Adapter for the direct connection of the sensor GP2Y1010AU0F using the Gravity interface for Arduino without additional modules and the prototype board.
Index: DFR-11282
Index: DFR-11282
DFRobot Gravity - TEMT6000 analog light sensor
Analog ambient light sensor TEMT6000, compatible with Arduino. The sensor allows to determine the light density and reflects the analog voltage signal back to Arduino. The...
Index: DFR-11253
Index: DFR-11253
Gravity - Thermocouple MAX31855K - I2C temperature sensor
Module MAX 31855K together with thermocouple allows to measure high temperatures with high accuracy. It o perates in the range from 0 °C to 800 °C with a supply voltage from...
Index: DFR-12473
Index: DFR-12473
DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12361
Index: DFR-12361
DFRobot Gravity - MLX90614-DCI IR thermometer - non-contact
Non-contact temperature IR sensor MLX90614-DCI. It is used for measurement of IR radiation and does not require direct touch. It communicates through an I2C interface.
Index: DFR-12351
Index: DFR-12351
Gravity - connection cable set - male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0897
A set of connecting cables equipped with a connector compliant with the Gravity standard and a 3-pin PH2.0 male goldpin connector. The cables were manufactured by DFRobot, they...
Index: DFR-21233
Index: DFR-21233
Gravity - RS485 to UART signal converter - DFRobot DFR0845
Module converting transmission signal from RS485 protocol to UART serial interface. It has a built-in TDH541S485H chip. It is compatible with most controllers, including...
Index: DFR-20374
Index: DFR-20374
Gravity - set of digital connection wires - male plug PH2.0 - 30cm - 10pcs. - DFRobot FIT0896
A set of connecting cables with a length of 30 cm equipped with two connectors - one compatible with the Gravity standard and one 3-pin PH2.0 male goldpin connector. The...
Index: DFR-21234
Index: DFR-21234
Gravity - Digital Wireless Switch Kit - 433MHz - DFRobot TEL0140-1
Digital Wireless Switch Kit is a set consisting of two radio modules - receiver and transmitter , which operate at 433 MHz . It is powered with a voltage range from 3.3 V...
Index: DFR-20431
Index: DFR-20431
See also
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Gas sensors
- Limit switches
- Sensors of light and color
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules