Arduino GSM MD 1400 with connectors
Arduino GSM MD 1400 with connectors
Arduino GSM MD 1400 with connectors
Arduino GSM MD 1400 with connectors
Arduino GSM MD 1400 with connectors
Arduino GSM MD 1400 with connectors - zdjęcie 1
Arduino GSM MD 1400 with connectors - zdjęcie 2
Arduino GSM MD 1400 with connectors - zdjęcie 3
Arduino GSM MD 1400 with connectors - zdjęcie 4
Arduino GSM MD 1400 with connectors - zdjęcie 5

Arduino GSM MD 1400-B - module ABX00018 with connectors

Index: ARD-12314 EAN: 5904422340926
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

The module based on the layout of the Atmel SAMD21 SoC with GSM module SARAU201 designed for IoT projects. Equipped With A Cortex-M0+. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12 channels PWM) and 7 analog inputs and one output, and popular communication interfaces. Works with a voltage of 3.3 V.

PLN265.85
PLN265.85 tax excl.

The minimum purchase order quantity for the product is 25.

Czas oczekiwania ok. 7-14 dni
Waiting for delivery
30-day returns
PayPal payment
Manufacturer: Arduino

Description

The module based on the system Atmel SAMD21 SoC with module GSM SARAU201 designed for IoT projects. Equipped With A Cortex-M0+. Has 8 digital inputs/outputs, 12 channels of PWM (e.g. for motor control) and 7 analog inputs with a resolution of 8 / 10 / 12 bit. The module also has 10-bit analog DAC output and the clock RTC. The system works with the signal ticking with the frequency of 48 MHz. Leads operate at voltage of 3.3 V. The module can be powered with battery Li-Pol 3.7 V 1S of at least 1500 mAh, through the microUSB or Vin connector. In the latter case, the manufacturer recommends to use a power source with parameters of 5 V / 2 A.

Arduino MKR GSM 1400

The subject of the sale is the original product for Arduino, Botland is the official distributor of this company.

Key features

Below are a few features that distinguish modules Arduino compared to other programmable tiles.

 

Name Description

Installed

bootloader

Thanks to bootloader for programming the device, sufficient are micro usb cable and the software from the manufacturer's website.

Small

size

This version is characterized by small size: 67 x 25 mm. It has soldered male connectors  from the bottom and female connectors on the top.

Connection

GSM

Arduino GSM MD 1400 has a built-in GSM module operating in the bands GSM 850 MHz E-GSM 1900 MHz / DCS 1800 MHz / PCS 1900 MHz built-in antenna 2 dB.

Digital leads

8 digital inputs/outputs allow i.a. the control of LEDs, relays and the reading of the buttons' states.

Current efficiency

The maximum current efficiency for one output is 7 mA.

Outputs

PWM

12 outputs PWM allow, for example, to control the motors and the brightness control of the LEDs.

Analog inputs

7 inputs of built-in analog to digital converter with a resolution of 12-bits, support, i.a. sensors with analog output.

Serial communication

The device supports popular communication interfaces, i.a. UART, I2C and SPI.

Built-in memory

Chip Atmel SAMD21 is a signal at a frequency of 48 MHz, has 256 KB of Flash memory and 32 KB RAM SRAM.

Power 5 V

microUSB / battery 3.7 V

To power the Arduino, you can use a power source with a voltage of 5 V with a microUSB connector and battery Li-Pol 1S 3.7 V with a capacity of at least 1500 mAh.

Charging the batteries Li-Pol

The module has the function to power batteries with voltage up to 4.2 V.

Built-in led

The connected led on pin 6, allows debugging simple programs.

 

First run

Manufacturer provides a user manual for easy connection of the device.

Arduino MKR GSM 1400

Specification

  • Voltage from 3.7 V to 5 V
  • Chip Atmel SAMD21
    • Core: Cortex-M0+
    • Maximum clock frequency: 48 MHz
    • SRAM: 32 KB
    • Flash memory: 256 KB
    • I/O ports: 8
    • PWM outputs: 12
    • Number of analog inputs: 7 (channels of A/C converter with 12-bit resolution)
    • Serial interfaces: UART, SPI, I2C
    • External interruptions
  • Module GSM SARAU201
    • Supported frequency
      • GSM 850 MHz
      • E-GSM 1900 MHz
      • DCS 1800 MHz
      • PCS 1900 MHz
    • Built-in antenna: 2 dB
  • MicroUSB slot
  • JST slot of charger with a lipol ( in our offer an appropiate cable is available)
  • Tile sizes: 67 x 25 mm
  • Weight: 32 g

We guarantee that all tiles marked with a symbol of Arduino, are original and come from the one source. As you can see by checking the list of authorized distributors.

 

Voltage to 3.7 V
Voltage from 5.0 V
Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - Microcontroller ATSAMD21G18
UC - Core 32-bit ARM Cortex M0
UC - Flash 256 kB
UC - RAM 32 kB
UC - core 1. Single Core
UC - Digital pins 8
UC - analog in 7
UC - freq 48 MHz
UC - A/C 12-bit
UC - C/A 1
UC - PWM 12
UC - GSM/GPRS yes
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN129.27 Price PLN129.27

Grove - Base Shield v2 - Shield for Arduino

Shield for Arduino, which extends the capabilities I/O pins. Designed for modules and sensors from the Grove series. It has 4-pin connectors, and all the outputs known from...
Index: SEE-04440
Index: SEE-04440
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN15.37 Price PLN15.37

Sense Hat for Raspberry Pi

The cap for the Raspberry Pi containing 3-axis gyroscope, accelerometer, magnetometer and a barometer, temperature and humidity sensor, the LED matrix and a small joystick. The...
Index: RPI-04585
Index: RPI-04585
Czas oczekiwania: ok. 10-30 dni
Regular price PLN133.33 Price PLN133.33

Raspberry Pi NoIR Camera HD v2 8MPx - original night camera for Raspberry Pi

Module with the camera, sensitive to infrared light for Raspberry Pi minicomputer version 3, 2, B+. The device has a matrix with a resolution of 8 Mpx, supports HD mode, 1080p,...
Index: RPI-06128
Index: RPI-06128
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN105.61 Price PLN105.61

Case TEKO for camera and Raspberry Pi Model 3/2/B+ - Black

Black  case for minicomputer Raspberry Pi in versions B2, B3 and B+ and a camera. External dimensions 101  x 74 x 29 mm .
Index: RPI-06649
Index: RPI-06649
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN44.72 Price PLN35.77
  • Reduced price
  • On sale

RPI3-MODBP-STARTER set of Raspberry Pi 3B+ + 16GB NOOBs card + original power supply + case

The kit includes a Raspberry Pi version B 3+ , along with the official white power supply of 5.1 V / 2.5 A, official  the red-white housing and memory card 16...
Index: FAR-11598
Index: FAR-11598
Unavailable
Regular price PLN243.82 Price PLN243.82

Arduino Yún Rev2 module ABX00020 - WiFi + Ethernet

Connecting Arduino® and Linux,  allows, via wi-fi network, to wirelessly program and control the device. The module based on system ATmega32u4, has 32 KB of Flash...
Index: ARD-12315
Index: ARD-12315
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN202.44 Price PLN182.20
  • Reduced price
  • On sale

Male Headers 1x40 raster 2,54mm straight

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00192
Index: KAB-00192
Unavailable
Regular price PLN0.57 Price PLN0.57

MSX FT232RL - USB-UART FTDI 3,3/5V converter

The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...
Index: MOD-01611
Index: MOD-01611
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN29.19 Price PLN29.19

Bluetooth module HC-05

Module Bluetooth v2.0 + EDR, class 2. It works with a voltage of 3.3 V and communicates over a serial UART interface (RX, TX), supports the AT command. Maximum transmitter...
Index: MOD-02570
Index: MOD-02570
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN34.72 Price PLN34.72

Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm

A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Index: SEE-04402
Index: SEE-04402
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN10.49 Price PLN10.49

MyoWare Muscle Sensor Development Kit - SparkFun KIT-14409

The kit allows you to control devices via bioelectrical signals generated by human muscles (EMG). The output is an analog signal that can be read using any microcontroller with...
Index: SPF-07278
Index: SPF-07278
Czas oczekiwania: ok. 10-30 dni
Regular price PLN356.91 Price PLN356.91

Products from the same category

Arduino MKR WAN 1310 - LoRaWAN SAMD21 - ABX00029

Module with 32-bit Atmel ARM Cortex-M0+ microcontroller , 256 kB Flash memory and 32 kB SRAM. Enables connection to the LoRa network . MKR WAN 1310 has a new battery...
Index: ARD-15839
Index: ARD-15839
Available, 24h shipping!
(Check quantity)
Regular price PLN158.54 Price PLN158.54

Arduino MKR Zero module ABX00012 - SAMD21-with connectors

Module with chip Atmel SAMD21 Cortex-M0+, allowing you to study modules for 32-bit. Has 256 KB Flash memory, 32 KB SRAM, 22 digital inputs/outputs, 12 channels PWM) and 7...
Index: ARD-10051
Index: ARD-10051
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN95.85 Price PLN95.85

MKR IoT Carrier Board for Arduino MKR - Arduino ABX00047

An extension for Arduino® modules from MKR series giving endless possibilities in IoT projects without soldering. The board features an OLED display , touch buttons,...
Index: ARD-19128
Index: ARD-19128
Available
(Check quantity)
Regular price PLN218.70 Price PLN218.70

Arduino MKR1010 module ABX00023 - Wi-Fi ATSAMW25 + ESP32 - with connectors

The module based on the ATSAMW25 Atmel SoC system with wi-fi ESP32 U-Blox designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital...
Index: ARD-12945
Index: ARD-12945
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN126.83 Price PLN126.83

Arduino MKR WAN 1300 LoRaWAN ABX00017 module - SAMD21 - with headers

The module is equipped with a 32-bit processor Atmel ARM Cortex-M0+, 256KB Flash memory and 32KB SRAM. It combines the capabilities of tile MKR Zero and connectivity LoRa. The...
Index: ARD-13292
Index: ARD-13292
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN158.54 Price PLN158.54

Arduino MKR1000 module ABX00011 - Wi-Fi ATSAMW25 - with connectors

The module based on ATSAMW25 Atmel SoC system with wi-fi, designed for IoT projects. Equipped with Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12...
Index: ARD-10050
Index: ARD-10050
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN149.51 Price PLN149.51

Arduino MCR Vidor4000 ABX00022 - module with FPGA Cyclone 10

The module based on the system Atmel SAMD21, designed for IoT projects. Equipped with a Cortex-M0+. It has 2 MB of Flash memory, 8 MB SRAM. In addition, the system is...
Index: ARD-12946
Index: ARD-12946
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN267.48 Price PLN267.48

OPLA IoT Starter Kit - programming kit - Arduino AKX00026

OPLÀ is the first IoT programming platform that allows you to create your own IoT devices with full control over their algorithms and your own data. Connected devices can be...
Index: ARD-18219
Index: ARD-18219
Available, 24h shipping!
(Check quantity)
Regular price PLN486.99 Price PLN486.99

Arduino MKR1000 module ABX00004 - Wi-Fi ATSAMW25 - without connectors

The module based on ATSAMW25 Atmel SoC system with wi-fi, designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12...
Index: ARD-12454
Index: ARD-12454
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN142.28 Price PLN142.28

Arduino Edge Control - outdoor environments Bluetooth controller - Arduino AKX00034

Controller equipped with Bluetooth chip for remote monitoring and control, optimized for outdoor environments . The board is equipped with a socket for plugging in any...
Index: ARD-19762
Index: ARD-19762
On request. Waiting time 4-6 weeks.
Regular price PLN698.37 Price PLN698.37

Arduino MKR NB 1500 - module ABX00019

The module based on Atmel ATSAMD21 SoC system and U-blox SARA-R410M, allows you to stay connected in the standard Narrowband-IoT and LTE Cat M1 . Tile has a Cortex-M0+, 256...
Index: ARD-13282
Index: ARD-13282
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN288.62 Price PLN288.62