List of products by brand SparkFun - Strona 26
Console for Intel Edison - SparkFun Block
A module for connecting the Intel Edison computing platform. It has a stabilizer that provides power supply with current capacity up to 1.5 A. It communicates via USB with FTDI...- EOL
SparkFun UART - module for Intel Edison
The module allows to derive serial UART communication interface from Intel Edison computing platform. The board can also power the Edison console.- EOL
- EOL
Intel Edison + Mini Breakout Kit
The Intel Edison platform is included in the package, along with a bootable disc that allows power, GPIO and USB ports to be connected.- EOL
Module XBee 802.15.4 1mW Series 1 - PCB Antenna
The XBee Series 1 module with a transmitter with the power of 1 MW and antenna built-in in the tracks of PCB, operating in the area of wireless network of up to 100...- EOL
Module XBee ZB Mesh 2mW Series 2 - Wire Antenna
XBee Series 2 module with a 2 mW transmitter with an antenna as a cable. It operates within a wireless network range up to 120 m. XBee Series 2 requires...- EOL
Module with infrared receiver TSOP85 - 38kHz - SparkFun
A small module with a TSOP85 infrared receiver , operating at 38 kHz.- EOL
RFID identification card - 125kHz - SparkFun
RFID identifier in the form of a plastic card with the dimensions of payment cards. Each chip has a unique 32-bit code. The devices operate at a short distance from the...- EOL
Antenna GPS 3,3V with connector SMA magnetically fixed - SparkFun
GPS antenna with SMA connector is mounted on the magnets, powered with the voltage of 3.3 V.- EOL
Receiver Venus GPS with connector SMA 3,3V - SparkFun
Versatile GPS receiver based on Venus638FLPx with high refresh rate of 20 Hz. It has a connector for emergency power supply, built-in Flash memory with the possibility of...- EOL
Venus Logger - GPS receiver with SMA 3,5-12V connector - SparkFun
Versatile GPS receiver based on Venus638FLPx with high refresh rate of 20 Hz. It has a PHR-2 connector for direct connection of the li-pol battery and the possibility of...- EOL
Module XBee Pro 802.15.4 60mW Series 1 - Wire Antenna
XBee Pro Series 1 module with a 60 mW transmitter with an antenna cable. It operates within a wireless network range of up to 1500 m . XBee Series 1 requires no...- EOL
Case for Raspberry Pi housing Model B Pi Tin - transparent
Transparent enclosure for the miniature Raspberry Pi computer with external dimensions 95 x 62 x 27 mm. Provides access to USB, Ethernet, SD, HDMI, audio, video, and GPIO...- EOL
Case for Raspberry Pi housing Model B Pi Tin - green
Green enclosure for a miniature Raspberry Pi computer with external dimensions 95 x 62 x 27 mm. Provides access to USB, Ethernet, SD, HDMI, audio, video, and GPIO outputs.- EOL
SOIC adapter on 8-pin DIP - SparkFun
Adapter for connection of circuits in SMD SOIC 8 pin enclosures to the DIP threaded leads. It also allows you to connect the circuits in a contact plate or connect with wires.- EOL
SSOP Adapter for 16-pin DIP - SparkFun
Adapter for connection of circuits in SMD SSOP16 housings to 16 pin DIP leads. It also allows to connect the circuits in a contact plate or connect with wires.- EOL
Case for Raspberry Pi camera - white
Plastic housing to protect the Raspberry Pi mini-camera. It ensures simple "click" mounting, has holes of 4.1 mm diameter for fixing screws.- EOL
SPI Controller - USB - SparkFun
The module allows you to control the SPI interface via USB. Using a virtual terminal, the user can communicate with sensors, modules and other devices using the SPI bus using...- EOL
Fingerprint reader - TTL GT-511C3 - memory of 200 prints
A module with a fingerprint reader communicating through a serial interface (RX, TX). It has a memory where you can store up to 200 fingerprints of different people and export...- EOL
Fingerprint reader - TTL GT-511C1 - memory of 20 prints
A module with a fingerprint reader communicating through a serial interface (RX, TX). It has a memory where you can store up to 20 fingerprints of different people and export...- EOL
GPS Shield - set with the receiver EM-506 GPS for Arduino
Overlay for connecting the GPS receiver to Arduino. The set includes: GPS Shield board, EM- 506 GPS receiver, connection cable and set of connectors for Arduino.- EOL
RedBoard SparkFun - compatible with Arduino
SparkFun module fully compatible with Arduino Uno. It has 14 digital inputs/outputs, 6 PWM channels, 6 analogue inputs and popular communication interfaces. The board has FTDI...- EOL
USB OTG for Intel Edison - SparkFun Block
The module allows you to connect various types of peripheral devices with a USB connection, such as a mouse or flash drive to Intel Edison. It is equipped with microUSB OTG AB...- EOL
ADXL193 analog accelerometer ± 250 g - SparkFun module
Sensor for measuring acceleration in one axis over a high range: ± 250 g. Powered by 3.5 V - 6 V. The output signal is an analogue voltage proportional to the measured...- EOL