List of products by brand SparkFun - Strona 7
RFID reader ID-20LA - 125kHz - SparkFun SEN-11828
Easy to use reader with integrated antenna, allowing to receive and transmit through the serial interface to the main device (e.g. Arduino), the ID of the RFID identifier....SSOP adapter to 8-pin DIP - SparkFun BOB-00497
This adapter allows you to connect SMD SSOP8 boards to 8 pin DIP leads. It also allows you to plug the chip into contact board or connect it by wires.Converter USB-UART FTDI 5V miniUSB - SparkFun DEV-09716
Small converter enables the connection between serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...Stepper Motor 39BYGL215A with threaded shaft 12V/ 0.4A/ 0.20Nm - SparkFun ROB-10848
Bipolar stepper motor, four-wire. It has a threaded shaft, which allows the device to be used as a linear actuator. It is powered by 12 V and draws 0.4 A per coil. The holding...XBee Explorer USB v2 module - SparkFun WRL-11812
USB converter for XBee module. It works with all XBee systems from 1 & 2.5, standard and pro series. This version has the RESET button for the XBee system.ADXL335 3-axis analog accelerometer - SparkFun SEN-09269
Sensor for measuring acceleration in three axes in the range of ± 3 g. Powered with the voltage from 1.8 V to 3.6 V; it consumes only 320 uA of the current. The output signal...Spectrum Audio Shield - SparkFun DEV-13116
Shield for Arduino is equipped with a filter for the graphical display of the audio signal amplitude. It allows you to split the sound from both stereo channels on 7 bands, and...Deflection sensor 112x6,3mm - SparkFun SEN-08606
During the bending, sensor increases its resistance. It can be used to detect the movement of your hand. Sensor length: 112 mm.MicroView - USB programmer - SparkFun DEV-12924
USB programmer for the module of MicroView OLED display. The device is equipped with male and female connectors, thanks to this, board can be attached directly or connect using...- On sale!
- Promotion
Simple Servo Trigger Servo Controller - SparkFun WIG-13118
A simple controller allowing the servo to move from position A to B after changing the state on the IN input pin. The position can be adjusted with potentiometers. The system...LilyTiny microcontroller ATtiny85 - programming - SparkFun DEV-10899
Miniature module with programmed Attiny85 AVR microcontroller, it has an 8-KB of Flash memory, 4 digital pins, analog input and 2 PWM channels. Uploaded program presents...- Reduced price
- Promotion
Servo Trigger - Continuous Rotation - SparkFun WIG-13872
Module facilitating servo operation. On receiving an external signal, the controller moves the servo from position A to position B at a predetermined speed. The supply voltage...RedBoard - Arduino compatible - SparkFun DEV-13975
SparkFun's module is fully compatible with Arduino Uno. It has 14 digital inputs/outputs, 6 PWM channels, 6 analog inputs and popular communication interfaces. On the board...Qwiic - Shield for Arduino - SparkFun DEV-14352
Shield for Arduino facilitating the connection of modules of SparkFun via connectors Qwiic. The shield connects the I2C bus Arduino with connectors Qwiic. As long as the...- On sale!
- Promotion
FlexiForce Pressure Sensor - 100lbs - SparkFun SEN-08685
Pressure sensor reduces its resistance when the force put to its tip, increases. Sensor with a length of 216 mm, the maximum pressure is approx. 45 kg.- Reduced price
- Promotion
FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.Piezoelectric vibration sensor - SparkFun SEN-09196
Piezoelectric vibration sensor, used for measurement of touch, vibration, shock and flexibility. A small AC voltage and high voltage up to 90 V, it occurs when the foil moves...LiPo Charger/Booster - Li-Pol charger - 5V/1A - PAM2401 - SparkFun PRT-14411
Charger for 1-cell lithium polymer batteries with a nominal voltage of 3.7 V. The supply voltage is 5 V, the maximum current is 500 mAh. The device has a 5 V 1 A booster. The...Conductive thread - spool 9m - SparkFun DEV-10867
Spool for the conductive thread. The thread is made of stainless steel fiber and wound on a reel. The filament has a resistance of 28 Ω per inch. Price includes a spool with...Qwiic Mux Breakout - 8-channel module with multiplexer I2C - TCA9548A - SparkFun BOB-16784
Module with a multiplexerem TCA9548A, allows you to connect 8 different digital I2C interfaces to one interface. Works with a supply voltage from 1.65 V to 5.5 V. The address...Module of 6 GNSS antennas - SparkFun GPS-15247
The module that contains 6 different GNSS antennas with connector u.FL. The board has antennas, such as: Molex Moled, Pulse W3011, Pulse W3062A, TE Puck, Molex Cube, Molex...- On sale!
- Promotion
Qwiic Scale - NAU7802 module for tensometric beam - SparkFun SEN-15242
The module is based on a NAU7802 system enabling the reading of data from a strain-gauge beams. By connecting the model to the microcontroller, you can read the change in...WiFi module Thing Plus - ESP32 WROOM - SparkFun WRL-15663
The SparkFun module is equipped with ESP32 WROOM and ESP32-D0WDQ6 for wireless communication using WiFi and Bluetooth. Thing Plus for communication uses Qwiic Connect...XBee 3 wireless communication kit - SparkFun KIT-15936
This kit allows to implement wireless communication to our project with Arduino using XBee 3 modules. The modules support 802.15.4, ZigBee and BLE protocols . UART and SPI...- On sale!
- Promotion