DC Motor 37Dx73L with 131:1 Gear 12V 76RPM + encoder CPR 64 - Pololu 4756

Index: PLL-16026 EAN: 5904422325145

A high power Polol engine with a 131:1 gearbox. Its speed is 76 rpm and its torque is 45 kg*cm (4. 41 Nm). It is equipped with a quadrature encoder with a resolution of 64 pulses per revolution (after transmission of 8400 pulses per revolution). The 12-volt motor draws 150mA without load and 5.5A with the shaft stopped.

DC Motor 37Dx73L with 131:1 Gear 12V 76RPM + encoder CPR 64 - Pololu 4756
€60.50
€49.19 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Pololu

Product description: Geared motor 37Dx73L 131:1 12 V 76 RPM + CPR 64 encoder

A high power Polol engine with a 131:1 gearbox.Its speed is 76 rpmandits torque is 45 kg*cm (4.41 Nm). It is equipped with a quadrature encoder with a resolutionof 64 pulses per revolution (aftertransmission of 8400 pulses per revolution). The12-voltmotor draws150mAwithout load and5.5Awith the shaft stopped.

Motor accessories

In our offer you will also find dedicated accessories:

Silnik z zamontowanym uchwytem i hubem

Special mountings and 6 mm Hubs formountingwheels have been designed for theengines.

Engine dimensions

The engine has a diameter of 36.8 mm and an overall length of 73 mm. Detailed data are given in the technical drawing.

Rysunek z wymiarami silnika

Where the dimension L is 26,5 mm.

Encoder in the motor

A sensor based on the Hall effect detects pulses on a rotating magnetic disk at the back of the engine. Square encoders allow measurement with a resolution of 64 pulses per motor shaft revolution. After the gearbox, this is the right number of times more.

The outputs:

  • Red- motorpower supply
  • Black -engine power
  • Green- encoder masspotential
  • Blue- Encoderpower supply(3.5 V - 20 V)
  • Yellow -encoderoutputA
  • White- encoder Boutput

The figure shows the signal from both encoder channels. The B signal is shifted in phase relative to the A signal by 90 degrees.

Motor specification 131:1

Parameter Description
Power supply voltage: 12 V
Encoder operation voltage: 3.5 V to 20 V
Gearbox: 131 : 1
Dimensions: 73 x 37 mm
Shaft diameter: 6 mm
The weight: 210 g
Encoder resolution: 64 pulses per revolution (after gear 8400)
Parameters for 12 V supply
Speed: 76 rpm
Torque: 45.0 kg*cm (4.41 Nm)
Average power consumption: 150 mA
Maximum current consumption: 5500 mA

Diameter 37 mm
Length 73 mm
Voltage to 12.0 V
Voltage from 12.0 V
Motor - current 150 mA
Motor - gear 131:1
Rotation speed 76 obr/min
Torque 45 kg*cm
Mass 210 g
Motor - shaft 6 mm
Voltage nominal 12 V
Package width 10.5 cm
Package height 5.3 cm
Package depth 5.2 cm
Package weight 0.229 kg

Be the first to ask a question about this product!

Product reviews

DC Motor 37Dx73L with 131:1 Gear 12V 76RPM + encoder CPR 64 - Pololu 4756

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: