- On sale!
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Magnets - Strona 3
Loading...
Electromagnet holding 12V 3W 15kgf
Powered by 12 V , a holding electromagnet that holds a mass of 15 kg under standard acceleration due to gravity (9.8 m/s 2 ). Current consumption during operation is...
Index: DNG-17570
Index: DNG-17570
Electromagnet holding 12V 4W 30kgf
Powered by 12 V , the holding electromagnet holds a mass of 30 kg at a standard acceleration due to gravity of 9.8 m/s 2 . The rated power of the device is 4 W and the...
Index: DNG-17576
Index: DNG-17576
- Reduced price
- Promotion
Electromagnet holding 12V 6W 60kgf
Holding electromagnet with a rated power of 6 W. It requires a voltage pulse of 12 V to operate. With a standard acceleration due to gravity of 9.8 m/s 2, the maximum...
Index: DNG-17579
Index: DNG-17579
The electromagnet is equipped with a 15 mm long pin, which after receiving a 12 V voltage signal makes a linear - pulling motion. The device draws a current of approx. 1.8...
Index: DNG-17764
Index: DNG-17764
Pulling electromagnet 12V 14,4W 3,5kg
Tractive solenoid, which requires a voltage of 12 V to operate correctly on the coil. The device, performing linear motion, draws about 1.2 A current. The range of the pin...
Index: DNG-17763
Index: DNG-17763
Electromagnet holding 6V 3W 0,48A 15kgf
Holding electromagnet powered by 6 V , with a maximum load capacity of 15 kg at a standard gravitational acceleration of 9.8 m/s 2 . Current consumption is approx. 0.48...
Index: DNG-17571
Index: DNG-17571
Electromagnet holding 12V 2W 8kgf
The holding electromagnet is powered by 12 V. The rated power is 2 W. The maximum load capacity of the magnet is 8 kg with a standard gravitational acceleration of 9.8 m/s...
Index: DNG-17569
Index: DNG-17569
Electromagnet holding 12V 3,5W 30kgf
Holding electromagnet with a rated power of 3.5 W. Powered by 12 V. Current consumption is approximately 300 mA. The device maintains a mass of 30 kg under standard...
Index: DNG-17574
Index: DNG-17574
Solenoid Valve 12V - 1/2'' 0,02-0,8MPa
The device supports the control of fluid flow using a computer or microcontroller. The valve is powered with the voltage of 12 V.
Index: MOD-09447
Index: MOD-09447
Pulling electromagnet 12V 8,4W 3,5kg
A device which, under the influence of providing a 12-volt voltage pulse, performs a pulling linear motion. The range of the electromagnet pin is 12 mm and its maximum load...
Index: DNG-17762
Index: DNG-17762
Electric lock - electromagnet with pull out pin
Electric lock powered with voltage of 12 V. Used e.g. for electronically controlled door, windows or drawers locking systems.
Index: MOD-05687
Index: MOD-05687
Electromagnet holding 12V 3,5W 25kgf
Holding electromagnet, powered by 12 V. With a standard acceleration due to gravity of 9.8 m/s 2 it supports a mass of 25 kg . The device's current consumption is 300 mA,...
Index: DNG-17573
Index: DNG-17573
Round neodymium magnets Calamit N35/Ni 6x3,6mm - 10pcs.
Set of 10 pieces of round neodymium magnets with dimensions 6 x 3.6 mm . They are characterized by very high attraction force. They have a lifetime guarantee of power and...
Index: CAL-16569
Index: CAL-16569
Electromagnet holding 12V 2W 5kgf
Holding electromagnet with a maximum load capacity of 5 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is...
Index: DNG-17568
Index: DNG-17568
Electromagnet holding 12V 10W 80kgf
A holding electromagnet which, after applying a voltage pulse of 12 V , holds a mass of 80 kg (with a standard acceleration due to gravity of 9.8 m/s 2 ). The current...
Index: DNG-17581
Index: DNG-17581
Electromagnet holding 12V 15W 240kgf
Holding electromagnet with a maximum load capacity of 240 kg (at standard gravitational acceleration of 9.8 m/s 2 ). Powered by 12 V. Current consumption is approximately...
Index: DNG-17583
Index: DNG-17583
Electromagnet holding 12V 10W 70kgf
Powered by 12 V , the holding electromagnet holds a mass of 70 kg under standard acceleration due to gravity (9.8 m/s 2 ). Current consumption during operation is...
Index: DNG-17580
Index: DNG-17580
Solenoid, coil, 5V electromagnet - SparkFun ROB-11015
The device allows to perform a linear movement, for example, pulling or pushing, using the voltage signal of 5 V. The range of the bolt is approximately 4.5 mm.
Index: SPF-01996
Index: SPF-01996
Electromagnet holding 12V 1W 3kgf
A holding electromagnet, which, when given a voltage pulse of 12 V , maintains a mass of 3 kg (at standard ground acceleration of 9.8 m/s2). The device takes about 170 mA,...
Index: DNG-17567
Index: DNG-17567
Neodymium magnets 6x3mm - 5pcs
Neodymium round magnet with dimensions of 6 x 3 mm Neodymium magnets have a very large attractive force due to the very high energy density. They have a lifetime warranty for...
Index: MAG-06504
Index: MAG-06504
Round neodymium magnet - 10x4mm - 5pcs
Round neodymium magnet with dimensions 10 x 4 mm. Neodymium magnets are characterized by a very high attraction force due to a very high energy density, much higher than...
Index: MAG-05723
Index: MAG-05723
Ferrite magnet cylindrical - 20x3mm - 5pcs
Y30 permanent ferrite magnet with the dimensions of 20 x 3 mm. It has a high resistance to corrosion, gases, salts, lubricants, acids and demagnetization. The operating...
Index: MAG-04840
Index: MAG-04840
Elektromagnet pushing 12V 2kg typ2
The push electromagnet is powered by 12 V , it can push a mass of 2 kg with a standard earth acceleration of 9.8 m/s2. The housing diameter is 25 mm and the housing length is...
Index: AKS-19282
Index: AKS-19282
Electromagnet pushing 12V 2kg 25mm
The pushing electromagnet is powered by 12 V , it can push out a mass of 2 kg with a standard earth acceleration of 9.8 m/s2. The housing diameter is 25 mm and the bolt...
Index: AKS-19283
Index: AKS-19283