CAN Bus Module - MCP2515 - SPI - hat for Feather - Adafruit 5709
Index: ADA-22888
- Reduced price
- Sale
- Reduced price
- Sale
LattePanda V1 - 4GB + 64GB EEMC Intel Quad-Core WiFi - Windows 10
Index: DFR-09376
- Reduced price
- Sale
STM32 NUCLEO-L152RE module - Low Power STM32L152RET6 ARM Cortex M3
Index: DIS-02216
- Reduced price
- Sale
- Sale
- Sale
Magnets - Strona 3
Loading...
Solenoid, coil, 5V electromagnet - SparkFun ROB-11015
The device allows to perform a linear movement, for example, pulling or pushing, using the voltage signal of 5 V. The range of the bolt is approximately 4.5 mm.
Index: SPF-01996
Index: SPF-01996
Electromagnet holding 12V 1W 3kgf
A holding electromagnet, which, when given a voltage pulse of 12 V , maintains a mass of 3 kg (at standard ground acceleration of 9.8 m/s2). The device takes about 170 mA,...
Index: DNG-17567
Index: DNG-17567
Elektromagnet pushing 12V 2kg typ2
The push electromagnet is powered by 12 V , it can push a mass of 2 kg with a standard earth acceleration of 9.8 m/s2. The housing diameter is 25 mm and the housing length is...
Index: AKS-19282
Index: AKS-19282
Electromagnet pushing 12V 2kg 25mm
The pushing electromagnet is powered by 12 V , it can push out a mass of 2 kg with a standard earth acceleration of 9.8 m/s2. The housing diameter is 25 mm and the bolt...
Index: AKS-19283
Index: AKS-19283
Electromagnet pulling 12V 7,8W 0,8kg
The electromagnet is equipped with a 10 mm long bolt, which after receiving a 12 V voltage signal performs a linear pulling movement. The device consumes approx. 0.65 A...
Index: DNG-17759
Index: DNG-17759
Electromagnet pulling 12V 24W 6,5kg
The electromagnet is equipped with a 20 mm long bolt, which after receiving a 12 V voltage signal performs a linear pulling movement. During operation the device consumes...
Index: DNG-17766
Index: DNG-17766
Electromagnet pushing 12V 0,2kg 11mm
The pushing solenoid is powered by 12 V and can push out a mass of 0.2 kg with a standard earth acceleration of 9.8 m/s2. The diameter of the housing is 11 mm, while the...
Index: AKS-19280
Index: AKS-19280
The NC (normally closed) solenoid valve allows you to control the fluid flow by opening the valve after applying 12 V to the connectors. The device is equipped with flat power...
Index: DNG-21689
Index: DNG-21689
Electric lock - electromagnet with pull out pin 12V
Electric lock powered by 12 V. The device is widely used in projects related to automation. The output of the electric lock is a cable terminated with a 2-pin connector with...
Index: DNG-22756
Index: DNG-22756
Electric lock - electromagnet with pull out pin 24V
24 V electric lock. The device is widely used in projects related to automation. The output of the electric lock is a cable terminated with a 2-pin connector with a pitch of...
Index: DNG-22758
Index: DNG-22758
Sonoff SWV-BSP - smart 3/4‘’ valve with water consumption measurement - ZigBee - Android/iOS app
Sonoff SWV-BSP is a 3/4'' smart water valve designed to automate irrigation systems. With easy installation, work schedules, voice assistant integration, and eWeLink app...
Index: INN-26030
Index: INN-26030
Electromagnet pulling 12V 0.4kg
The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: DNG-12093
Index: DNG-12093
Ferrite permanent magnet Y30 with dimensions of 20 x 20 x 5 mm. It has high resistance to corrosion, gases, salts, greases, acids and demagnetization. The operating temperature...
Index: MAG-05587
Index: MAG-05587
- Discontinued product
Holding electromagnet 12V 60kgf
This 12V holding electromagnet holds a mass of 60 kg at a standard gravitational acceleration of 9.8 m/s². The electromagnet's dimensions are 80 x 38 x 23.6 mm. A set of...
Index: MOD-09813
Index: MOD-09813
Solenoid Valve Mini - 12V 0,04MPa
The device supports control of fluid flow using a computer or microcontroller. The valve is powered by a voltage of 12 V, maximum pressure is 0.04 MPa (0.4 bar).
Index: MOD-09456
Index: MOD-09456
Holding electromagnet is powered with voltage of 12 V with power of 4.2 W. It keeps the weight of 180 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the...
Index: MOD-08835
Index: MOD-08835
Pulling electromagnet 12V 0,6kg
Electromagnet, which after giving a voltage signal of 12 V , allows for linear motion - pulling. The range of the device's pin is 10 mm and its maximum load capacity is 0.6...
Index: DNG-17758
Index: DNG-17758
Electromagnet holding 6V 3W 0,48A 15kgf
Holding electromagnet powered by 6 V , with a maximum load capacity of 15 kg at a standard gravitational acceleration of 9.8 m/s 2 . Current consumption is approx. 0.48...
Index: DNG-17571
Index: DNG-17571
Pulling electromagnet 12V 14,4W 3,5kg
Tractive solenoid, which requires a voltage of 12 V to operate correctly on the coil. The device, performing linear motion, draws about 1.2 A current. The range of the pin...
Index: DNG-17763
Index: DNG-17763
Ferrite magnet cylindrical - 20x3mm - 5pcs
Y30 permanent ferrite magnet with the dimensions of 20 x 3 mm. It has a high resistance to corrosion, gases, salts, lubricants, acids and demagnetization. The operating...
Index: MAG-04840
Index: MAG-04840
ZigBee water consumption measuring valve - Tuya RTX ZVG2
A smart wireless valve with water consumption measurement . The RTX ZVG2 valve uses the ZigBee 3.0 standard for communication; a dedicated Tuya gateway is required for...
Index: REM-21502
Index: REM-21502