Description
The solenoidallows to perform a linear movement, for example, pulling or pushing, using the voltage signal of 5 V. The range of the bolt is approximately 4.5 mm. The device has the mounting holes with a diameter of 1.6 mm, suitable for screws with the M2 thread. Powering wires with the length of 5 cm are ended with a JST connector.
The device can be controlled via devices operating with 5 V, for example,Arduinomodules with the appropriate transition device, for example,optical isolator.
|
Attention! The Solenoid consumes a relatively large current so connecting it directly to the pins of the microcontroller will lead to irreversible damage to the system. |
Video
Specification
- Supply voltage: 5 V
- Current consumption: 900mA
- Wires: JST with the length of 50 mm
- The range of bolt: 4.5 mm
- Mounting holes with the diameter of 1.6 mm
- Dimensions: 20 x 12 x 11 mm (without bolt) / 29 x 12 x 11 mm (with bolt)
- Weight: approx. 62 g
Useful links |
