xTool M1 2-in-1 - cutter and engraver - 10W - deluxe package
Index: XTL-23950
- Reduced price
- Promotion
Filament Polymaker PolyTerra PLA 1,75mm, 1kg - Sapphire Blue
Index: PLM-22644
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
SENSORS - Strona 16
Loading...
Module with digital temperature sensor MLX90614ESF-BAA-000-TU-ND
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus. The voltage ranges from 3.0 V to 5.0 V.
Index: GRL-13443
Index: GRL-13443
BleBox humiditySensor v2 - WiFi temperature and humidity sensor
BleBox humiditySensor v2 is a small sensor that communicates via a local WiFi network, allowing you to measure relative humidity and air temperature . Thanks to the wBox...
Index: BOX-22885
Index: BOX-22885
- Reduced price
- Promotion
Camera module for Arduino 5 MPx with a resolution of 2592 px x 1944 and speeds up to 120 frames per second. It extends the capabilities of the microcontroller with the ability...
Index: ACM-06558
Index: ACM-06558
Analog voltmeter - panel DH-50 - 40V DC
Analogue voltmeter capable of measuring voltages up to 40 V . It has a square housing with dimensions of 50 x 50 mm. Its accuracy is CLASS 2.5.
Index: UPM-09923
Index: UPM-09923
QTR-8A reflectance sensor array- analog - Pololu 960
Strap of the eight reflecting sensors with analog outputs. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00152
Index: PLL-00152
Grove - water level sensor - 10cm - Seeedstudio 101020635
Sensor to measure the water level in a vessel up to 10 cm using the Arduino module. The measurement is made by volume . The tile is equipped with a Grove connector, for...
Index: SEE-16346
Index: SEE-16346
Fermion - SHTC3 I2C temperature and humidity sensor - DFRobot SEN0414
The SHTC3 temperature and humidity sensor on the Fermion series DFRobot board. The SHTC3 can measure humidity from 0% to 100% RH with an accuracy of ±2% RH and temperature...
Index: DFR-20677
Index: DFR-20677
Tensometric beam NA27 3kg (30N)
Strain gauge beam operating within the range up to 3 kg , (approx. 30 N). The smallest version is used e.g. for kitchen scales, portable scales. The connection cable has...
Index: SES-03543
Index: SES-03543
Extender/Active Terminator LTC4311 - I2C signal amplifier - Adafruit 4756
I2C signal amplifier in the form of Adafruit module. It provides the user with faster data transmission , without the need for additional cables. In addition, it allows...
Index: ADA-18234
Index: ADA-18234
ACHS-7121 Current Sensor Carrier -10A to +10A - Pololu 4030
Current sensor operating in the range from -10 to 10 A based on the Hall effect. The input voltage from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.
Index: PLL-14236
Index: PLL-14236
DFRobot Gravity SEN0224 - LIS2DH - 3-axis I2C accelerometer
Sensor for measuring acceleration in three axes in the range +/- 2 g , +-4 g, +g -8 or +-16 g . The module is powered with the voltage from 3.3 to 5 V, it has a voltage...
Index: DFR-08831
Index: DFR-08831
DFRobot Gravity - MP3 player - JQ8400-FL UART
Module that allows you to play music files directly from the 8 MB device memory . It supports MP3 and WAV formats. It communicates with the microcontroller via the UART...
Index: DFR-12358
Index: DFR-12358
ACHS-7123 Current Sensor Carrier -30A to +30A - Pololu 4032
Current sensor operating in the range from -30 to 30 A, based on the Hall effect. Input voltage is from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.
Index: PLL-14234
Index: PLL-14234
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with modules of Arduino and Raspberry.
Index: SEE-11358
Index: SEE-11358
Set of DAG RS030 magnetic encoders
Set includes two Hall sensor with two round magnets to be placed on the motor's shaft. The encoders are powered with a voltage from 3 to 24V, they consume up to 4 mA of...
Index: ROB-02182
Index: ROB-02182
Inductive proximity sensor E2S-H4N1 4mm 10-30V
The E2S-H4N Inductive Proximity Sensor allows metal detection up to 4 mm away. It has a 200 cm cable length. The response time is less than 1 ms and the switching...
Index: DNG-17435
Index: DNG-17435
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...
Index: SEE-11357
Index: SEE-11357
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
High temperatura probe PT100 - 7x200mm
Waterproof analogue sensor with the high temperature working in the range from -200°C to 420°C. The output is resistance dependent on temperature. Probe length is 200 mm.
Index: SES-07467
Index: SES-07467
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
MPRLS - pressure sensor 172kPa I2C 3-5V - Adafruit 3965
A pressure sensor that provides measurement in closed spaces using the cable. It communicates using the I2C interface. The measuring range of pressure is from 0 to 172 kPa. It...
Index: ADA-12999
Index: ADA-12999
Inductive proximity sensor E2S-H4N1 4mm 5V
Inductive proximity sensor E2S-H4N1 with 200 cm cable. Enables detection of metal up to a distance of 4 mm . The switching frequency is 1000 Hz and the response time is...
Index: DNG-17436
Index: DNG-17436
NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.
Index: SES-04942
Index: SES-04942