Description
Sensor for measuring acceleration in three axes in the range +/- 2 g, +-4 g, +g -8 or +-16 g. The module is powered with the voltage from 3.3 to 5 V, it has a voltage regulator, it communicates via an I2C bus. The sensor is characterized by low current consumption, in a standard operation, about 11µa. The module has two programmable systems for detecting free decrease and motion, and built-in temperature sensor.
|
The product is compatible with Arduino Connection diagram with Arduino can be found atthis address. |
Specification
- Voltage: from 3.3 V to 5 V
- Current consumption: 2µa to 11µa
- Communication: Gravity - I2C
- Sensitivity range:± 2 g / ± 4 g / ± 8 g / ± 16 g
- Frequency: from 1 Hz to 5 KHz
- 2 programmable noise generators for the detection of free decrease and motion
- Built-in temperature sensor
- Working temperature: from -40℃ to 85℃
- Dimensions: 26,2 x 26.2 mm
- Weight: 12 g
| Pin | Description |
|---|---|
| VCC | Supply voltage from 3.3 V to 5.0 V. |
| GND | The ground of the system |
|
SCL |
Clock line of the I2C interface |
|
SDA |
Data line of I2C interface |
Useful links |
