- New
- On sale!
- Promotion
- On sale!
- Promotion
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
Index: DFR-09528
- Reduced price
- Promotion
Gravity modules - Strona 9
Loading...
Gravity URM09 - ultrasonic distance sensor 2-500cm sensor analog - DFRobot SEN0307
Module with ultrasonic distance sensor URM09, with measuring range from 2 cm to 500 cm. Supply voltage is 3.3 V to 5.5 V. The measuring frequency can reach up to 30 Hz. It...
Index: DFR-14859
Index: DFR-14859
Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308
The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
DFRobot Gravity - digital sound generator - buzzer
Digital buzzer module for Arduino and Raspberry Pi, which can be controlled via low and high status. When changing the frequencies of the buzzer, you can hear a different...
Index: DFR-11263
Index: DFR-11263
DFRobot Gravity - relay 1 channel - 10A/277VAC contacts - 5V coil
Module with relay that allows for the control of the actuators consuming the current of up to 12 A for the voltage of 125 V or 10 A for 277 V through the ports of the...
Index: DFR-05964
Index: DFR-05964
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
DFRobot TCS34725 RGB Color Sensor For Arduino
A module that allows you to make the function to determine the color of ambient light. Applied sensor TCS34725 with a LED backlight and a built-in IR filter. It communicates...
Index: DFR-07591
Index: DFR-07591
Gravity: ADC converter ADS1115 16-bit - 4-channel
Module made by the Gravity features a 16-bit analog-to-digital converter ADS1115.
Index: DFR-12472
Index: DFR-12472
DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n
The EMG sensor was created through the cooperation of DFRobot and OYMotion. EMG - electromyograph, sensor of electric activity of muscles and peripheral nerves of human. This...
Index: DFR-10833
Index: DFR-10833
DFRobot Gravity - voltage divider 1/5
A voltage divider is used, when the measured voltage has a larger value than the range of A/D converter. The device works in the range from 0,0245 V to 25 V. The output...
Index: DFR-11261
Index: DFR-11261
Gravity - 9DOF sensor BMX160 + temperature and pressure sensor BMP388 - I2C- DFRobot SEN0252
The module is equipped with two BMX160 and BMP388 sensors. BMX160 is a 9-axis sensor which allows to measure the acceleration in the ranges ± 2 g / ± 4 g / ± 8 g / ± 16 g...
Index: DFR-15712
Index: DFR-15712
Gravity - I2C - 2x UART converter - DFRobot DFR0627
A module that allows to derive two UART interfaces from the I2C interface. The maximum transmission speed is 1 Mb/s , each UART interface has an independent FIFO buffer...
Index: DFR-17311
Index: DFR-17311
DFRobot Gravity: Analog Heart Rate Monitor Sensor (ECG) For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog signal. The kit includes a probe,...
Index: DFR-07436
Index: DFR-07436
Gravity: Offline Language Learning Voice Recognition Sensor - I2C & UART - DFRobot SEN0539-EN
The voice recognition module - Gravity Offline Language Learning Voice Recognition Sensor - allows you to recognize 121 voice commands saved in memory, as well as expand...
Index: DFR-23332
Index: DFR-23332
DFRobot Gravity - analog ph Pro sensor/meter
The analog pH meter is compatible with Arduino. It has an accuracy of +/- 0.1 pH which is sufficient in most cases. The Pro version has the industrial probe that can be...
Index: DFR-06112
Index: DFR-06112
DFRobot Gravity: Digital shake sensor
The shock sensor reacts to movement in a certain direction, so it can detect, for example, a hand movement. It is equipped with a vibration switch, spring type which serves to...
Index: DFR-13294
Index: DFR-13294
DFRobot Gravity - DC motor + propeller module
Module with DC motor and built-in transistor, it does not require an additional driver. Control is via PWM signal. It has a connector adapted to DFRobot IO Expansion Shield.
Index: DFR-05965
Index: DFR-05965
Connection cable equipped with Gravity series connector, manufactured by DFRobot . Designed to connect digital peripherals (sensors) equipped with a Gravity connector to...
Index: DFR-19547
Index: DFR-19547
DFRobot Gravity - analog sensor of water salinity - DFR0300
The device allows to measure the salinity of water by studying the reverse of resistance which is the conductance. Conductivity of water can reflect the level of electrolytes...
Index: DFR-10304
Index: DFR-10304
DFRobot Gravity - vibration motor module
Module from the Gravity series with vibration motor for Arduino controlled with the PWM signal, low and high status. The supply voltage is 5 V.
Index: DFR-11287
Index: DFR-11287
Gravity - rainfall sensor - I2C and UART - DFRobot SEN0575
The Gravity rainfall sensor from DFRobot is a reliable and convenient device for precise measurements. Its design is based on a container with inclined walls that allow...
Index: DFR-23474
Index: DFR-23474
DFRobot Gravity v2.0 - relay 1 channel - 277VAC / 16A contacts - 5V coil
Module with relay that allow for the control of the actuators through the ports of the microcontroller. The kit includes a cable adapted to DFRobot IO Expansion Shield.
Index: DFR-11262
Index: DFR-11262
DFRobot Gravity - connection cable - for analog sensors to Arduino - 30cm - 10pcs.
Connection wires with Gravity standard produced by DFRobot. Designed to connect analog peripheral devices (sensors equipped with Gravity connector) with Arduino type...
Index: DFR-19551
Index: DFR-19551
DFRobot Gravity - ARK adapter for 4pin Gravity sensors - FIT0511
The adapter is designed for 4-pin sensors, optimized for the connection with the Gravity interface. It has two types of power supplies of 3.3 V and 5 V.
Index: DFR-09967
Index: DFR-09967
Gravity - BME680 I2C environmental sensor - DFRobot SEN0248
A 4-in-1 MEMS environmental sensor equipped with Gravity connector, manufactured by DFRobot. It features an embedded Bosch BME680 chip. The multifunctional module is a...
Index: DFR-19200
Index: DFR-19200
See also
- Oxygen sensors
- Optical sensors
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Limit switches
- Sensors of light and color
- Gas sensors
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Grove modules
