Fermion - 3-axis magnetometer - BMM150 - I2C/SPI - DFRobot SEN0419

Index: DFR-20994
Module with a three-axis magnetometer from DFRobot, equipped with a Bosch BMM150 system - based on the FlipCore technology. It enables the measurement of the magnetic field in the range of ± 1300 uT (X and Y axis) and ± 2500 uT (Z axis) with a measurement resolution of 0.3 uT . The module provides information about absolute orientation with high accuracy and precision of measurements.
Fermion - 3-axis magnetometer - BMM150 - I2C/SPI - DFRobot SEN0419
€8.57
€6.97 tax excl.
Available
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino Raspberry Pi

Product description: Fermion - 3-axis magnetometer - BMM150 - I2C / SPI - DFRobot SEN0419

Module with a three-axis magnetometer from DFRobot , equipped with a Bosch BMM150 system - based on the FlipCore technology. It enables the measurement of the magnetic field in the range of ± 1300 uT (X and Y axis) and ± 2500 uT (Z axis) with a measurement resolution of 0.3 uT . The module provides information about absolute orientation with high accuracy and precision of measurements.

Kit contents

  • Fermion - 3-axis magnetometer - BMM150 - I2C / SPI - DFRobot SEN0419 - 1 looking
  • 1x9 goldpin strip - 2.54 mm raster - 1 piece
The set also includes the 1x9 goldpin strip - 2.54 mm raster - intended for self-soldering.

The set also includes the 1x9 goldpin strip - 2.54 mm raster - intended for self-soldering.

The product is compatible with Arduino and Raspberry Pi!
A detailed user guide is available on the manufacturer's website - check it out!

Fermion - 3-axis magnetometer - BMM150 - I2C / SPI - DFRobot SEN0419

Fermion - 3-axis magnetometer - BMM150 - I2C / SPI - DFRobot SEN0419.

Magnetometer principle of operation

The most common questions are: what is a magnetometer? What is a magnetometer for? The answers to these questions (and more) can be found on our blog in the article Magnetometr - how does it work and what is it for?

Application magnetometer

  • Intelligence drones
  • Recreational drones
  • Indoor and outdoor navigation in open spaces
  • Collecting information about the magnetic course
  • Augmented Reality
  • Tilt-compensated electronic compass for map rotation
  • Magnetometer in the phone

Pinout description and connection diagram using the Raspberry Pi

The module has outputs in the form of solder pads to which the goldpin strip included in the set should be soldered. Each lead has been described, which makes the connection much easier.

  • VCC - power pin
  • GND - the ground of the system
  • SCK - clock line of the I2C / SPI interface
  • SDI - data line of the I2C / SPI interface (input)
  • SDO - data line of the SPI interface (output)
  • CS - Chip Select
  • PS - selection of the communication protocol
  • DRDY - ready to receive / transmit data
  • INT - interrupt pin
Connection diagram of the sensor with the Raspberry Pi 4B.

Connection diagram of the sensor with the Raspberry Pi 4B.

Fermion - 3-axis magnetometer - BMM150 - rear view.

Fermion - 3-axis magnetometer - BMM150 - rear view.

Technical specification of the module

  • Supply voltage: 3.3 V
  • Measurement range: ± 1300 uT (X, Y axis), ± 2500 uT (Z axis)
  • Measurement resolution: 0.3 uT
  • Accuracy: 30 uT
  • Zero-B Offset: ± 40 uT / ± 2 uT
  • Non-linearity: <1% FS
  • Accuracy of the magnetometer heading: horizontal component of the geomagnetic field 30 uT, ± 2.5 °
  • Communication interface: I2C or SPI
  • I2C bus address: 0x13
  • Current consumption: from 170 uA to 500 uA
  • Dimensions: 25 x 15 mm
Interface SPI / I2C
Sensor - type IMU

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Product reviews

Fermion - 3-axis magnetometer - BMM150 - I2C/SPI - DFRobot SEN0419

5/5

Average grade

1

Customers opinion
17.05.2022
this is too much goodness

Customers who bought this product also bought:

Products from the same category: