- New
ELECTRONICS - Strona 67
ZP2 industrial connector with quick connector - 5-pin
Industrial connector ZP2 with a connector allowing for quick attachment of a five-plane cable. The connector is made of metal in silver.Rotary switch 6-position 2 circuits - 37mm
Six-state rotary switch for housing equipped with 14 contacts. Total height is 37 mm.Jack 3,5mm - 2x Jack 3,5 mm 4-pin adapter - 20cm
Cable is used for audio signal transfer. It has 3.5 mm jack plug and two 3.5 mm jack slots. It allows you to connect headphones and microphone to laptops with separate audio...BleBox ProxiDimmer v2.0 - 12-24V LED touch controller
Complete module that allows you to control the brightness of the LED strips and chains by touch or gesture. Works with 12 V to 24 V voltage and performance current up to 6 A....Socket DC 5,5/2,5mm with terminal connector - 5pcs
DC φ5.5 x 2.5 mm slot (for AC power supply) with a detachable connector that allows you to mount the cable using a screwdriver.High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.Plastic foot NS40 40x10mm - 4pcs
Round feet made of plastic used as a stand for various types of objects. The diameter of the leg is 40 mm and its height is 10 mm. It has a foam padding so it does not scratch...Quick couplings UY 4CI-2006 - 5pcs
Quick connectors are used to connect two veins of the cables with a diameter of 0.5 mm. Gel-filled for protection from corrosion and moisture. Price for 5 pieces.Markers kit for 4mm cables - 100pcs
Kit for marking cables with diameters up to 4 mm. Contains 10 markers each with numbers from 0 to 9 in different colours.Linear voltage regulator kit - 5V-24V TO220 - 14pcs
Set of 14 popular regulators in TO220 housing.LED strip driver - Mini - 11 keys
The module allows you to control the brightness of a single-color LED strip. It is equipped with a DC 5.5 / 2.1 mm power connector and a remote control.Controller L9110 with DC motor and fan
Fan made of plastic with a DC motor and the control unit of the direction of rotation based on the system L9110 with digital outputs. It has the ability to blow out the flame...Ceramic capacitor 470pF/50V - 1000 pcs.
Through hole ceramic capacitor of 470 pF / 50 V. Price for 1000 pieces.- Reduced price
- SPECIAL OFFERS
LED indicator 12V AC/DC - 28mm - white
LED light, operating voltage 12 V AC/DC. It has a diameter of 28 mm.LED indicator 230V AC - 28mm - yellow
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.Reed switch normally - plastic 14,5mm
Reed contact in plastic straight housing, 14.5 mm long.Safety switch ON-OFF mushroom - 40mm
The "mushroom" safety switch with a loading capacity of contacts: 10 A for 440 V.FlexiForce Pressure Sensor - 25lbs. (1" area) - SparkFun SEN-11207
Pressure sensor reduces its resistance when the force put to the round tip, increases. The round sensor with a diameter of 25.4 mm, the maximum pressure is 11 kg.SanDisk Ultra Fit - memery USB 3.2 pendrive 32GB
USB 3.2 Ultra Flair memory from SanDisk with capacity of 32 GB. It is equipped with a small case. The device has a 5 years warranty.Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...ON-OFF switch monostable - PBW-12BPW - 2A / 250V - red
A salient, monostable switch with the red backlight. Contact load is 2 A for 250 V.Limit switch with lever - WK611 - 5pcs.
Limit switch with lever with the length of 25 mm. Maximum operating parameters: voltage of 250 V and current of 5 A.Limit switch mini curved - WK622 - 5 pcs.
Limit switch with lever with the length of 19 mm. Maximum working parameters are the AC voltage of 250 V and current of 3 A.
