Arduino - Strona 15
Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...Gravity - ambient light and colour sensor - I2C/UART - DFRobot SEN0611
DFRobot brand module equipped with a light sensor, designed with professional photographers in mind. Thanks to factory calibration, it provides precise color temperature (CCT)...QTR-8RC reflectance sensor array - digital - Pololu 961
Strap with eight reflective sensors with digital output. It is powered with the voltage of 5 V or 3.3 V.Arduino Micro - module A000053
Module based on the Arduino® Leonardo with Atmega32U4 AVR microcontroller, is characterized by small size. Has 32 KB Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, of...Set of breadboard 830 + 140 jumper wires
Contact plate 830 hole (pitch 2.54 mm) with a set of 140 jumper wires, to facilitate connection. Relief in the design of striped (blue and red), denoting the polarity of the...StarterKit advanced for Arduino (without the Arduino module)
A set of electronic components that will help you get started with modules from the Arduino. The kit includes LEDs, resistors, sensors, chips and LCD display, engine along with...Breadboard - 830 holes transparent
Breadboard is used to create and test electronic circuits without soldering. Version with 830 fields, sized 165 x 53 mm in a transparent case . B lue and red stripes, marking...Breadboard - 830 holes with power leads + holder + jumpers 70pcs
Breadboard with 830 hole (raster 2.54 mm) with a set of 70 jumpers and a metal stand with slots for the banana connectors. Blue and red strips, marking the power supply...- Sale
- SPECIAL OFFERS
Female socket 1x10 raster 2,54mm for Arduino - 5pcs
10-pin female connector strip is used in the Arduino Uno and Leonardo. Raster: 2.54 mm. Price for 5 pcs of connectors.Graphic color display TFT LCD 1,8'' 128x160px + microSD reader - SPI - Adafruit 358
Graphic LCD TFT display with a diagonal of 1.8" and a resolution of 128 x 160 px with 18-bit color depth. It works with a voltage of 3.3 V and 5V, communicates through the SPI...DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.- Reduced price
- SPECIAL OFFERS
XBoard v2 of the Internet-bridge - compatible with Arduino
Xboard is a board compatible with Arduino, has an Ethernet port, slot for XBee modules and Atmega328 microcontroller known from version Uno. The device can be programmed via...DFRobot RS232 - Shield for Arduino
Shield for Arduino, which allows data transfer via popular RS232 protocol. It has installed DB9 slot.Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .- Reduced price
- SPECIAL OFFERS
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....RS485/CAN - Shield for Arduino - Waveshare 10771
Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...Wifi Bee ESP8266 WiFi module DFrobot Xbee in size
A small wi-fi 2.4 GHz IEEE802.11b/g/n board, based on ESP8266 system with the leadss that are compatible with X-Bee. Communication via the serial UART interface. It has the...Power supply MW Power 12V/5A - plug DC 5,5/2,1mm
Stabilized mains power supply. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current: 5 A.MIDI KIT - Shield dla Arduino - SparkFun DEV-12898
Module to connect the Arduino via MIDI Protocol. This interface is used to exchange information with synthesizers, sequencers and other popular music devices.- Sale
- SPECIAL OFFERS
Grove - UV sensor - analog module
UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...- Reduced price
- SPECIAL OFFERS
Grove - TSL2561 - digital I2C ambient light sensor
Module from Grove with a digital sensor measuring the light intensity of the environment. It has a linear spectral response in the visible light range to the human eye. The...
