- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
Heatsink with fan - for Odyssey-X86J4105 - Seeedstudio 114070141
Index: SEE-18808
- Reduced price
- Sale
- Sale
- Sale
- Sale
- Sale
Arduino - Strona 14
Loading...
DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.
Index: PLL-02671
Index: PLL-02671
DFRobot RS232 - Shield for Arduino
Shield for Arduino, which allows data transfer via popular RS232 protocol. It has installed DB9 slot.
Index: DFR-02992
Index: DFR-02992
DFRobot Intermediate Kit for intermediate Arduino users v2.0
Kit of electronic components for people who already have experience with Arduino. Included are i.a. DFRduino Uno board (compatible with Arduino Uno), the display, relay, LEDs,...
Index: DFR-03412
Index: DFR-03412
Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .
Index: SEE-04413
Index: SEE-04413
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....
Index: SEE-04445
Index: SEE-04445
RS485/CAN - Shield for Arduino - Waveshare 10771
Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...
Index: WSR-04517
Index: WSR-04517
Wifi Bee ESP8266 WiFi module DFrobot Xbee in size
A small wi-fi 2.4 GHz IEEE802.11b/g/n board, based on ESP8266 system with the leadss that are compatible with X-Bee. Communication via the serial UART interface. It has the...
Index: DFR-05500
Index: DFR-05500
Power supply MW Power 12V/5A - plug DC 5,5/2,1mm
Stabilized mains power supply. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current: 5 A.
Index: ZAS-07356
Index: ZAS-07356
Grove - UV sensor - analog module
UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.
Index: SEE-08307
Index: SEE-08307
Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...
Index: SEE-11300
Index: SEE-11300
Grove - TSL2561 - digital I2C ambient light sensor
Module from Grove with a digital sensor measuring the light intensity of the environment. It has a linear spectral response in the visible light range to the human eye. The...
Index: SEE-11303
Index: SEE-11303
Velleman WPSH203 LCD Keypad Shield display - Shield for Arduino
Shield for Arduino with popular LCD 2x16 character display and five user's buttons. With the LCD KeyPad Shield it is very easy to create a user interface.
Index: VEL-11602
Index: VEL-11602
Set of electronic components + breadboard 830 - E23 - 830 elements
The set of prototype elements that can be used for creating electronic circuits with Arduino. The kit includes: breadboard, power supply for the breadboard, sets of wires,...
Index: GRL-12112
Index: GRL-12112
DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12361
Index: DFR-12361
DFRobot Gravity - 2x16 I2C LCD display - green
LCD display 2x16 characters with backlight in green. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12363
Index: DFR-12363
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
Cytron Robot Combat Controller URC10 ATmega328P + driver engines 24V/10A compatible with Arduino
Dual-channel DC motor driver. The module can control the direction of rotation, start, stop and speed of the DC motors. Continuous current per 10 A channel (temporary 30 A)....
Index: CTN-12414
Index: CTN-12414
Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...
Index: SEE-13345
Index: SEE-13345
RedBoard Qwiic - Arduino compatible - SparkFun DEV-15123
A module made by SparkFun is fully compatible with the Arduino Uno. It has 14 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication...
Index: SPF-13881
Index: SPF-13881
Velleman VMA209 sensors LM35 + DS18B20 - multifunctional shield for Arduino
Shield for Arduino with 7 segment LED display 4 digits, 4 SMD LEDs, 3 independent buttons, buzzer, interfaces for sensors LM35 and DS18B20, interface IR receiver,...
Index: VEL-13897
Index: VEL-13897
ADT7410 - High Accuracy I2C Temperature Sensor Breakout Board - Adafruit 4089
Adafruit temperature sensor with high accuracy with digital thermometer ADT7410 in the range of -40°C to +105°C equipped with interface I 2 C (TWI). The supply voltage ranges...
Index: ADA-13951
Index: ADA-13951
RFID Qwiic Reader - SparkFun SEN-15191
Easy to use RFID reader module is equipped with Qwiic connectors based on the I2C interface. It works with systems series ID-3LA, ID-12LA and ID-20LA. The board allows you to...
Index: SPF-14072
Index: SPF-14072
- Sale
- SPECIAL OFFERS
Gravity - DHT22 digital temperature and humidity sensor - DFRobot SEN0137
DFrobot's DHT22 digital humidity and temperature sensor module provides precise measurements and has a short response time combined with high reliability and resistance to...
Index: DFR-15760
Index: DFR-15760