- Reduced price
- Sale
- Reduced price
- Sale
Analog time programmer TS-WF1 - with Schuko socket - Kemot URZ2001-5
Index: LEC-24140
- Reduced price
- Sale
Arduino - Strona 13
Loading...
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - Pololu 5069
Shield designed to work with Arduino, which allows you to control three DC motors powered with voltage from 1.8 V to 22 V. It communicates via the I2C interface . The...
Index: PLL-23648
Index: PLL-23648
Grove - Lightning Sensor - AS3935 - Seeedstudio 101021072
The Grove AS3935 sensor is an advanced, easy-to-use sensor that can detect both cloud-to-ground and intra-cloud lightning , up to a 40 km radius. It communicates via the...
Index: SEE-23887
Index: SEE-23887
Gravity - ambient light and colour sensor - I2C/UART - DFRobot SEN0611
DFRobot brand module equipped with a light sensor, designed with professional photographers in mind. Thanks to factory calibration, it provides precise color temperature (CCT)...
Index: DFR-25288
Index: DFR-25288
QTR-8RC reflectance sensor array - digital - Pololu 961
Strap with eight reflective sensors with digital output. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00020
Index: PLL-00020
Arduino Micro - module A000053
Module based on the Arduino® Leonardo with Atmega32U4 AVR microcontroller, is characterized by small size. Has 32 KB Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, of...
Index: ARD-01481
Index: ARD-01481
Set of breadboard 830 + 140 jumper wires
Contact plate 830 hole (pitch 2.54 mm) with a set of 140 jumper wires, to facilitate connection. Relief in the design of striped (blue and red), denoting the polarity of the...
Index: PLY-01504
Index: PLY-01504
StarterKit advanced for Arduino (without the Arduino module)
A set of electronic components that will help you get started with modules from the Arduino. The kit includes LEDs, resistors, sensors, chips and LCD display, engine along with...
Index: ARD-01726
Index: ARD-01726
Breadboard - 830 holes transparent
Breadboard is used to create and test electronic circuits without soldering. Version with 830 fields, sized 165 x 53 mm in a transparent case . B lue and red stripes, marking...
Index: PLY-01763
Index: PLY-01763
A-Star 32U4 Micro 5V/16MHz - Pololu 3101
The module is equipped with Atmega32u4 microcontroller with installed bootloader compatible with the environment of Arduino. It is equipped with 18 digital inputs/outputs, as...
Index: PLL-02292
Index: PLL-02292
Graphic color display TFT LCD 1,8'' 128x160px + microSD reader - SPI - Adafruit 358
Graphic LCD TFT display with a diagonal of 1.8" and a resolution of 128 x 160 px with 18-bit color depth. It works with a voltage of 3.3 V and 5V, communicates through the SPI...
Index: ADA-02663
Index: ADA-02663
DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.
Index: PLL-02671
Index: PLL-02671
DFRobot RS232 - Shield for Arduino
Shield for Arduino, which allows data transfer via popular RS232 protocol. It has installed DB9 slot.
Index: DFR-02992
Index: DFR-02992
Grove - TH02 - I2C temperature and humidity sensor
Temperature and humidity sensor TH02 from Grove with I2C interface. The temperature measurement range is from 0 °C to 70 °C and humidity from 0 to 80% RH .
Index: SEE-04413
Index: SEE-04413
Grove - 10kΩ linear rotary potentiometer - top connector
Potentiometer 10 kOhm with linear rotary. It as a 300° range of rotation. It h as a 4-pin Grove connector on the side of the handle.
Index: SEE-04433
Index: SEE-04433
Grove - StarterKit v3 - IoT starter package for Arduino
Starter set introducing the world of IoT (Internet of Things) for Arduino boards. The set includes i.a.: sensors of light, touch, temperature, servo, display and many others....
Index: SEE-04445
Index: SEE-04445
RS485/CAN - Shield for Arduino - Waveshare 10771
Shield that allows you to connect the Arduino to the RS485 interface or CAN bus. It is equipped with drivers: MAX3485 and SN65HVD230 for the CAN, it works with the Uno,...
Index: WSR-04517
Index: WSR-04517
Wifi Bee ESP8266 WiFi module DFrobot Xbee in size
A small wi-fi 2.4 GHz IEEE802.11b/g/n board, based on ESP8266 system with the leadss that are compatible with X-Bee. Communication via the serial UART interface. It has the...
Index: DFR-05500
Index: DFR-05500
Grove - UV sensor - analog module
UV sensor with voltage supply from 3.3 V to 5 V. Output analog voltage, proportional to the intensity of UV radiation. The sensor can be used to detect harmful solar radiation.
Index: SEE-08307
Index: SEE-08307
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
Grove - Collision Sensor - collision and vibration sensor
Collision sensor from Grove. It detect collision and vibration. It has an additional external circuit, to reduce the effect of ambient noise. The module is supplied with the...
Index: SEE-11300
Index: SEE-11300
Grove - TSL2561 - digital I2C ambient light sensor
Module from Grove with a digital sensor measuring the light intensity of the environment. It has a linear spectral response in the visible light range to the human eye. The...
Index: SEE-11303
Index: SEE-11303
Velleman WPSH203 LCD Keypad Shield display - Shield for Arduino
Shield for Arduino with popular LCD 2x16 character display and five user's buttons. With the LCD KeyPad Shield it is very easy to create a user interface.
Index: VEL-11602
Index: VEL-11602
Set of electronic components + breadboard 830 - E23 - 830 elements
The set of prototype elements that can be used for creating electronic circuits with Arduino. The kit includes: breadboard, power supply for the breadboard, sets of wires,...
Index: GRL-12112
Index: GRL-12112
DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12361
Index: DFR-12361