- Sale
- Sale
- Sale
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Arduino - Strona 12
Loading...
Wio Terminal - LoRaWAN LoRa-E5, 868MHz GNSS with antenna - Seeedstudio 114992728
Wio Terminal extension module for communication in LoRaWAN LoRa-E5 standard and GNSS at frequency 868 for EU and 915 for US . It is also equipped with SMA antenna .
Index: SEE-20122
Index: SEE-20122
ItsyBitsy M0 Express - board with ATSAMD21 microcontroller - Adafruit 3727
ItsyBitsy - compact board compatible with Arduino. It is equipped with an efficient ATSAMD21 microcontroller with an ARM Cortex M0 processor, operating at a frequency of...
Index: ADA-21058
Index: ADA-21058
Metro ESP32-S2 - WiFi module with ESP32-S2 chip - Adafruit 4775
Adafruit Metro ESP32-S2 is a development board equipped with the ESP32-S2 chip with WiFi wireless communication. It supports the 2.4 GHz 802.11b/g/n WiFi standard, has 4...
Index: ADA-23012
Index: ADA-23012
Gravity - analog AC current sensor - up to 5A - DFRobot SEN0287
Analog AC current sensor from DFRobot with a 1 m long probe . It allows you to measure the current flowing in the wire without having to cut it - the measurement is made...
Index: DFR-23730
Index: DFR-23730
Seeedstudio LCD display module with a diagonal of 1.47'' , a resolution of 172 x 320 px and a vivid spectrum of 262,000 RGB colors . It has an SPI interface that...
Index: SEE-23898
Index: SEE-23898
Ramps 1.4 RepRap driver for 3D printer
Popular driver of 3D printer, adapted to work with Arduino Mega 2560 and stepper motors driver A4988. The system requires a power source with an output voltage of 12 V and...
Index: MOD-02193
Index: MOD-02193
- Sale
16-channel servo driver, 12-bit PWM I2C - Shield for Arduino - Adafruit 1411
16-channel PWM generator, it is useful when there is not enough outputs of the microcontroller. Allows for i.a.: control of the servos, speed adjustment of motors or change the...
Index: ADA-02448
Index: ADA-02448
DFRobot Gravity DFR0018 - set of 9 modules with cables for Arduino
A set of 9 popular modules compatible with Arduino boards. It has 7 sensors, including: light, temperature, touch, rotation, vibration sensors, and the button and the module...
Index: DFR-03933
Index: DFR-03933
Grove - IR receiver 38kHz 940nm
IR receiver from Grove , operating at a frequency of 38 kHz with a supply voltage from 3.3 V to 5.0 V. Maximum sensitivity is observed for the wave length of 940 nm.
Index: SEE-04419
Index: SEE-04419
Feather M0 datadalogger with microSD card reader - compatible with Arduino - Adafruit 2796
A small module with a microcontroller ATSAMD21G18 ARM Cortex M0 known from Arduino M0. Feather is designed for portable projects. On board is a connector microUSB, through...
Index: ADA-06568
Index: ADA-06568
FeatherWing radio module RFM69 433MHz - pad for Feather - Adafruit 3230
The module from the Feather family is equipped with a 433 MHz RFM69 long-range radio module. It allows data transmission at a distance of up to 500 m , using a piece of...
Index: ADA-07290
Index: ADA-07290
Joystick Shield v1.A - Shield for Arduino
Module with a joystick and buttons connected directly to the ports on Arduino. It is supplied with2-axes lever and six buttons. It has built-in I2C connector, Bluetooth,...
Index: MOD-08234
Index: MOD-08234
Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - soldered connectors - Adafruit 3591
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...
Index: ADA-10874
Index: ADA-10874
Grove - Button - module with a button
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-11297
Index: SEE-11297
Cytron Maker Uno Plus compatible with Arduino
The Cytron module, compatible with Arduino Uno R3. It has 14 digital input/outputs, 6 PWM channels, 6 analog inputs, as well as popular communication interfaces. In addition,...
Index: CTN-13455
Index: CTN-13455
E-Paper Raw Panel Driver Shield - Shield for e-Paper Display for Arduino - SPI - Waveshare 15082
Universal shield for connection of displays e-Paper for modules of Arduino or Nucleo. For communication, it uses SPI interface. It works with a voltage of 3.3 V and 5 V.
Index: WSR-13460
Index: WSR-13460
VCNL4040 - Proximity Sensor Breakout - 20cm (Qwiic) - SparkFun SEN-15177
A digital sensor that combines the ability to measure proximity IR and measure the intensity of ambient light. The module allows to detect obstacles in the range of 0 to 20 cm....
Index: SPF-14071
Index: SPF-14071
Electronic components set for Arduino - Iduino KTS042
A set of prototype parts that you can use to create circuits with Arduino. The set includes: contact board, wire sets, Tact Switch buttons, LEDs, and a table to help identify...
Index: OST-14319
Index: OST-14319
Grove - BMP280 - Pressure and temperature sensor I2C/SPI
Pressure and temperature sensor, model BMP280, Grove. Used to measure atmospheric pressure and ambient temperature. It is compatible with Arduino. It has a small size, consumes...
Index: SEE-14986
Index: SEE-14986
Capacitive touch screen TFT 2,8" 240x320px with microSD reader - Shield for Arduino - Adafruit 1947
Overlay for Arduino with capacitive TFT touch screen. Its diagonal is 2.8" , resolution is 240 x 320 px . The display has LED backlighting and individual pixel control,...
Index: ADA-17671
Index: ADA-17671
FeatherWing OLED display 128x64px - pad for Feather - STEMMA QT/Qwiic - Adafruit 4650
Feather overlay with a monochrome OLED display with 128 x 32 px resolution. The screen diagonal is 1.3" and the high contrast of the display makes the presented data...
Index: ADA-17699
Index: ADA-17699
M40210M09S M12 Low Distortion Lens - For ArduCam Cameras - Arducam LN014
The M40210M09S lens is manufactured by ArduCam. It has low distortion which is less than 1%. The lens is compatible with cameras designed for Arduino and Raspberry Pi. Its...
Index: ACM-18604
Index: ACM-18604
PWM motor and servo controller - I2C 8-channel - PCA9685 - overlay for Feather - Adafruit 2928
An overlay for the Feather family of products in the form of an 8-channel motor and servo controller. Control is performed using PWM (Pulse Width Modulation) signal. The...
Index: ADA-19257
Index: ADA-19257
Overlay for Arduino produced by DFRobot which allows to control two 35V / 2A DC motors . Equipped with L298P chip that allows to control direction and speed of connected...
Index: DFR-19896
Index: DFR-19896