Description: Numato Lab - 16-channel Ethernet GPIO module with analog inputs - GPETH160001
16-channel Ethernet GPIO module produced by Numato Lab company. Universal, dedicated to remote control of electrical and electronic devices from the PC via Ethernet connection. The module is easy to use, allows the use of ready-made terminal emulation programs, such as HyperTerminal and TeraTerm, to control the module using a simple set of human readable commands via TELNET service or an easy to use web interface.
Specific features of the module
- 16 TTL compatible GPIOs available (3.3 V)
- All GPIO leads can be individually configured as input or output
- GPIO pinouts can be controlled via simple web or TELNET interface
- No knowledge of TCP/IP protocol is required for use
- Module contains 10 analogue input channels (multiplexed with GPIO)
- 10-bit resolution of the analog input
- Microcontroller: Microchip PIC18F97J60 (1 Mb Flash memory with 10 Mb/s Ethernet communication interface)
- Memory: built-in Microchip 25LC1024 chip provides 1024 kb of non-volatile EEPROM for storing web pages and device configuration
- MAC Address: Separate serial EEPROM (24AA02E48) with globally unique value used as device MAC address
- Reset Jumper: Resets the board to factory default settings
- Password protected web console and TELNET communication interface
- LED indicator for power supply
Application of the module from Numato Lab
- Home automation
- Lighting control
- Control of garden equipment
- Industrial automation
- Test equipment
- Do-it-yourself and hobby
Technical specification of the module with Ethernet
- Number of GPIOs: 16
- Number of ADC inputs: 10 (multiplexed with IO)
- ADC resolution: 10 bit
- I/O voltage: 3,3 V
- Communication: Ethernet 10BASE-T
- User interface: HTML / Web, TELNET
- Dimensions: 130 x 80 x 2.54 mm
- Weight: 68 g