Arduino - Strona 19
Feather Bang ESP8266 wi - fi module, GPIO, ADC - Adafruit 2821
Wi-fi module, based on ESP8266. On board are 9 GPIO ports with support for I2C and SPI, analog input and a connector of a lipo battery of 3.7 V. It has NodeMCU software that...DFRobot Gravity StarterKit with DFRduino Uno
Starter set introducing the world of Arduino programming. It allows for the construction of more than a dozen of projects using Arduino and i.a.: servos, LEDs, distance and...Power supply 12V/5A DC 5,5/ 2,1mm
Stabilized mains power supply. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current: 5 A.FeatherWing radio module RFM69 433MHz - pad for Feather - Adafruit 3230
The module from the Feather family is equipped with a 433 MHz RFM69 long-range radio module. It allows data transmission at a distance of up to 500 m , using a piece of...Case for Arduino Mega - transparent open
Transparent case that protects the module Arduino Mega. It provides digital connectors and ensures ventilation of integrated circuits. It has no side walls. Dimensions: 125 x...Z-Uno 2 - plate is Z-Wave compatible with Arduino
Module connecting the capabilities of the Protocol Z-Wave and Arduino board. It allows you to control home automation devices using the Arduino microcontroller. It has 26...DFRobot FireBeetle ESP8266 IoT Wi-Fi
The FireBeetle module is equipped with a Tensilica L106 microcontroller which supports communication in the MCU mode, wi-fi. It is constructed for the IoT projects...Circuit Playground, Express - Base KIT compatible with Arduino and Code.org - Adafruit 3517
Kit with Circuit Playground Express module based on ARM ATSAMD21 3.3 V / 48 MHz microcontroller with support for Arduino, CircuitPython, Microsoft MakeCode. and code.org CS...Qwiic - Shield for Arduino - SparkFun DEV-14352
Shield for Arduino facilitating the connection of modules of SparkFun via connectors Qwiic. The shield connects the I2C bus Arduino with connectors Qwiic. As long as the...- On sale!
- Promotion
A-II GSM Shield, GSM/GPRS/SMS/DTMF v.2.105 - for Arduino and Raspberry Pi
The new version of the module working with Arduino and Raspberry Pi that provides communication in GSM and GPRS. Based on Quectel M95, it allows for voice calls, sending SMS...Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - Adafruit 3405
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...LED FeatherWing - 4x 14-segment display - Adafruit 3089
Module from Feather family features four 14-segment displays that can display all numbers and the whole alphabet. Very bright characters can be read even from 7 meters.- On sale!
- Promotion
A-Star 328PB Micro - 3.3 V/12MHz - ATmega328 module - Pololu 3163
The module is equipped with the AVR Atmega328PB microcontroller with installed bootloader in accordance with the environment of Arduino. It is e quipped with 24 digital pins...A-Star 328PB Micro - 3.3V/8MHz - ATmega328 module - Pololu 3162
The module is equipped with the AVR Atmega328PB microcontroller with installed bootloader in accordance with the environment of Arduino. It is equipped with 24 digital pins of...Grove - radio transmitter + 433MHz receiver module
Set from Grove including the transmitter and receiver that communicate with each other at a frequency of 433 MHz . It works with voltage of 5 V. Supports the ASK modulation....Grove - rotary encoder with a button
Knob in a form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal to the SIGA and SIGB outputs, depending on the...Grove - sensor / probe for measuring soil moisture v1.4 - analog
The sensor allows you to determine the moisture level of the soil. It is supplied with the voltage from 3.3 V to 5 V. The output has analog voltage, which increases its value...Velleman WPSH203 LCD Keypad Shield display - Shield for Arduino
Shield for Arduino with popular LCD 2x16 character display and five user's buttons. With the LCD KeyPad Shield it is very easy to create a user interface.DFRobot OLED display blue 0,96" 128x64px - I2C - for FireBeelte
OLED blue display with a diagonal of 0.96" and a resolution of 128 x 64 pixels, with 2 built-in buttons and a joystick. Screen based on SSD1360 driver works with voltages of...DFRobot Gravity - 2x16 I2C LCD display - blue
LCD display 2x16 characters with backlight in blue. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.Velleman WPK501 DIY starter kit with Velleman module Uno - Arduino-compatible
A set of electronic components that will help you get started with modules from the Arduino. The kit includes LEDs, resistors, sensors, chips and segment displays,...- Reduced price
- Promotion
Grove - module with Bluetooth 3.0 with EDR
Module from the Grove series, allowing to connect via Blootooth v3.0 + EDR, class 2. It works with a voltage of 5 V, it communicates through the Grove standard slot, it...DFRobot Beetle ESP32 v2.0 IoT - microcontroller with WiFi Bluetooth
Beetle ESP32 is a smaller version of the FireBeetle board. Board based on the ESP-WROOM-32D module with dual-core Tensilica LX6 processor with the frequency of 240 MHz. It has...Qwiic OpenLog - data logger - SparkFun DEV-15164
The latest version of the module Qwiic by company SparkFun OpenLog. The device allows easy data recording up to 32 GB to the microSD memory card. Thanks to the installed...- On sale!
- Promotion