Significant progress in power electronics has made that a constant current can be changed by different methods using semiconductor elements that find wide application in electric DC motors, which are more and more often we can meet for both Amateur and professional. Starting from the smallest drones, electric cars to giant construction cranes. In each of these devices to work properly we will need the corresponding engine control.
- New
- New
- On sale!
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
Drivers for DC motors
Loading...
L293D - two-channel 36V / 0,6A motor driver - 5pcs
Two-channel motor controller. Supply voltage up to 36 V. Average current per channel 600 mA (momentary up to 1.2 A). Housing: DIP 16 (through-hole). Set contains 5 pcs of chips.
Index: UCC-00176
Index: UCC-00176
Cytron MD20A - single-channel motor controller 30V/20A
Single-channel DC motor controller based on MOSFET transistors. Enables control of motor speed through PWM channel. Continuous current per channel is 20 A (momentary 60 A)....
Index: CTN-14000
Index: CTN-14000
Cytron MD13S - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A ). Supply voltage from 5 V to 30 V. There is a Grove connector on the board.
Index: CTN-12412
Index: CTN-12412
L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...
Index: MOD-03164
Index: MOD-03164
Cytron MDD3A - dual-channel 16V / 3A motor controller
The Cytron MDD3A motor controller has the ability to control 2 DC motors or 1 stepper motor. Continuous current per channel is 3 A (momentary 5 A). Supply voltage is from 4 V...
Index: CTN-15819
Index: CTN-15819
TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...
Index: PLL-00032
Index: PLL-00032
Cytron MDD20A - two-channel motor driver 30V/20A
Two-channel DC motor controller. Supply voltage ranges from 6 V to 30 V, maximum current per channel is 20 A at continuous operation and 60 A of instantaneous current . The...
Index: CTN-18881
Index: CTN-18881
Cytron MDD10A - dual-channel 30V / 10A motor controller
Two-channel DC motor controller. Continuous current per channel is 10 A (momentary 30 A) . Supply voltage is 5 V to 30 V . The controller works with logical voltage 3.3 V...
Index: CTN-15818
Index: CTN-15818
L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...
Index: MOD-08227
Index: MOD-08227
Cytron SmartDriveDuo MDDS30 - two-channel DC motor driver - 7V-35V/30A
Two-channel DC motor controller by Cytron equipped with SmartDrive function supporting 4 different communication interfaces. The controller works with motors supplied with...
Index: CTN-14814
Index: CTN-14814
DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
DRV8874 - single channel 37V/2.1A motor driver - Pololu 4035
Single-channel DC motor driver from Pololu equipped with the DRV8874 system. It is supplied with the voltage from 4.5 V to 37 V. The continuous current per channel is 2.1...
Index: PLL-21359
Index: PLL-21359
Cytron MD25HV - single-channel DC motor driver - 7V-58V / 25A
A set with a single-channel DC motor controller by Cytron, equipped with a rocker switch for changing the direction of rotation and a potentiometer for speed control. The...
Index: CTN-14813
Index: CTN-14813
DFRobot - motor driver 5,5V/1,5A for BBC micro:bit
An overlay for micro:bit to control four DC motors , two stepper motors and eight servos (5.5V/1.5A). Additionally the module has 9 I/O pins Micro:bit.
Index: DFR-12359
Index: DFR-12359
Cytron MD10-POT - DC motors controller 30V / 10A + switch + potentiometer
Single channel DC motor controller allowing motor control by switch and potentiometer without the need for microcontroller and programming. Continuous current per channel 10 A...
Index: CTN-13450
Index: CTN-13450
Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
L298N - two-channel motor driver
Two-channel H-bridge. Supply voltage: max. 46 V. Max. instantaneous current 2 A. Housing: Multiwatt15 (THT).
Index: UCC-00060
Index: UCC-00060
two-channel h-bridge - SN754410NE
H-bridge - controller based on MOSFET transistors supplied with voltage from 4.5 to 36 V with current capacity up to 2 A.
Index: UCC-02153
Index: UCC-02153
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...
Index: WSR-13304
Index: WSR-13304
DFRobot L298N - two-channel motor controller - 12V / 2A
Two-channel DC motor controller based on L298N system. Supply voltage is up to 12 V. Maximum current per channel is 2 A. The system has a built-in voltage regulator 5 V, to...
Index: DFR-13754
Index: DFR-13754
Simple DC 28V/3A motor driver - module with knob
Extremely easy to use, single-channel direct current motor controller with speed control knob. The device works on the basis of PWM signal. Power supply voltage is from 8 V to...
Index: MOD-06906
Index: MOD-06906
Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino
Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
TB6612FNG - two-channel motor controller
Two-channel H-bridge. Continuous current per channel 1,2 A momentary up to 3,2 A. Supply voltage up to 15 V. Housing SSOP-24 (SMD).
Index: UCC-00495
Index: UCC-00495
What are DC motor controllers and what are they used for?
In the chain of electromechanical drive systems, the DC motor controller is a device constituting an intermediate link between the control system and the supply voltage source and the motor. The control system is increasingly based on a previously programmed microcontroller and its task is to send appropriate control signals necessary for the proper operation of the engine - particularly important here is the adjustable pulse width (PWM) signal, which influences the direct current consumed by the engine in terms of its average value over specific time intervals, which translates into the correct setting of the output power on the engine shaft and its rotational speed. Due to the fact that most microcontrollers available on the market have a limited output current of several dozen milliamps, and DC electric motors are characterized by a rated current consumption from several to even several dozen amperes, it is necessary to use an intermediary system, in the form of a special controller that solves problem of regulating the flow of current supplying the motor.
Drivers with high current efficiency and great possibilities of cooperation with external equipment
The DC motor controllers offered by the Botland store can be used for both motors with metal and plastic gears. Our assortment includes controllers with a wide range of operating voltages and currents tailored to the needs of your project. Most often, the DC motor control module is based on an H-bridge in the form of an integrated circuit or a discrete one - based on MOSFET transistors, and its control is carried out via an interface that includes a set of digital input/output ports, including PWM signal generation, thanks to which you can easily connect your DC motor controller with a module containing a microcontroller - also for the needs of such an application, you can purchase dedicated Arduino shields from us, but it is also possible for the driver modules to work with other platforms based on microcontrollers as general-purpose motor controllers. Additionally, the Botland store offers DC motor controllers compatible with Raspberry Pi computers. In line with today's requirements regarding cooperation between peripheral systems, the DC motor controllers we offer are adapted to communicate via USB, UART, I2C or TTL interfaces.
DC motor controllers - FAQ
Links to technical diagrams and instructions for connecting individual models of controllers to DC motors are available in the "Useful links" sections under the descriptions of each product.