- Reduced price
- Promotion
- On sale!
- Promotion
Engraving laser 3D/CNC - PLH3D-XT-50 - 12-24V/6W - Opt Lasers
Index: OPT-23495
- Reduced price
- Promotion
SENSORS - Strona 4
Loading...
HX711 - amplifier for a strainer beam - SparkFun SEN-13879
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.7 V to 5.0 V, communicates via a two-wire bus: the data line and a...
Index: SPF-04283
Index: SPF-04283
DS18B20 temperature sensor + 4,7kΩ resistors
This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.
Index: SES-09821
Index: SES-09821
SHT31 - digital humidity and temperature sensor I2C - Adafruit 2857
Humidity and temperature sensor powered by the voltage from 3 V to 5.0 V with I2C interface. The measurement of temperature is from -40 °C to 125 °C, humidity from 0 to 100 % RH.
Index: ADA-05415
Index: ADA-05415
- Reduced price
- Promotion
Rotation sensor, pulser, encoder with button - Iduino SE055
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal on the CLK and DT pins, depending on the...
Index: OST-14273
Index: OST-14273
HX711 - amplifier for tensometers
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.6 V to 5.5 V, communicates via a two-wire bus: the data line and a...
Index: DNG-12479
Index: DNG-12479
Waterproof probe with temperature sensor DS18B20 SENT0002 - 2m
Waterproof probe with DS18B20 digital sensor. Designed for temperature measurement in the range from -55°C to +125°C. Measurement accuracy in the temperature range from -10°C...
Index: DNG-19516
Index: DNG-19516
- Reduced price
- Promotion
Waterproof probe with temperature sensor DS18B20 - 5m
Waterproof probe is equipped with a digital thermometer DS18B20 with a cable with the length of 5 meters.
Index: SES-04590
Index: SES-04590
Encoder with button - 24 impulse 12mm - EC12 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...
Index: MOD-06909
Index: MOD-06909
Limit switch 50mm - Pololu 1403
SPDT limit switch position with extended metal plate with a length of 50 mm.
Index: PLL-00017
Index: PLL-00017
Limit switch with curved handle. Maximum operating parameters: voltage of 250V and current of 16 A.
Index: PAS-00926
Index: PAS-00926
Distance sensor, reflective 3,3V/5V - 30mm - Waveshare 9523
The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from...
Index: WSR-04459
Index: WSR-04459
Waterproof probe with temperature sensor DS18B20 - 1m - Iduino 3DS024
High quality waterproof probe based on DS18B20 chip. The housing is made of stainless steel and has dimensions of 50 x 6 mm. Power supply voltage is from 3 V to 5 V. The cable...
Index: OST-15245
Index: OST-15245
Liquid flow sensor YF-S201 30l/m - thread 1/2''
Sensor of liquid flow operating in the range from 1 to 30 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...
Index: SES-08896
Index: SES-08896
AC current sensor SCT 013-030 - up to 30A
The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...
Index: MOD-04273
Index: MOD-04273
IR beam interruption sensor - LED 3mm - 0-25 cm
The sensor reacts to an interruption in the beam of infrared light that is transmitted between the transmitter and receiver. The module is equipped with a 3 mm IR LED with...
Index: DNG-18687
Index: DNG-18687
Limit switch mini - WK310 - 5pcs.
Limit switch without lever. Maximum operating parameters: voltage of 125 V and current of 1 A.
Index: PAS-00922
Index: PAS-00922
Voltage divider 5V/25V for Arduino
A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
Module with reflective sensor KTIR0711S powered with the voltage of up to 5 V. It is characterized by small dimensions : 9 x 14 mm .
Index: MOD-00918
Index: MOD-00918
Liquid level sensor CMW55 - magnetic
The sensor allows you to control the water level in the tank. It consists of a float with a magnet which, under the force of buoyancy, is shifted, causing a short circuit of...
Index: SES-03730
Index: SES-03730
Temperature and humidity sensor DHT11 - module Iduino SE052
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...
Index: WSR-04918
Index: WSR-04918
Limit switch mini - WK607 - 5 pcs
A limit switch without a roller. Maximum operating parameters are 125 V and 5 A current.
Index: PAS-00928
Index: PAS-00928
Bracket for PIR SR501Px motion detector
Transparent bracket for the popular PIR motion detector with mounting holes. Made of acrylic .
Index: GRL-10385
Index: GRL-10385
Limit switch with roller - WK7141
Limit switch with a 5 cm long spring loaded lever ended with a roller. It operates at 250 V and the maximum load is 5 A. The limit switch is used to detect the position of the...
Index: AKS-14640
Index: AKS-14640
BleBox tempSensor v2 - temperature sensor Wi-Fi
Complete module enabling temperature measurement through Wi-Fi network using a smartphone app from anywhere in the world. In order to use BleBox, you just need to set up the...
Index: BOX-13841
Index: BOX-13841