- Reduced price
Product description: SparkFun Audio Codec Breakout - WM8960 - Qwiic - with connectors - SparkFun BOB-21772
The SparkFun Audio Codec Breakout audio module is based on the WM8960 chip. It supports stereo speakers with a power of 1 W per channel and has an interface through which it is possible to connect a microphone. The module can also work as a stereo ADC and DAC audio converter. SparkFun Audio Codec Breakout is equipped with a number of useful features, including: Advanced on-chip digital signal processing for automatic level control (ALC), programmable signal gain (PGA), attenuation function and much more. The module communicates via the I2S bus. The subject of the sale is a version of the board that has factory-soldered connectors.
The manufacturer has also prepared a user's guide that makes it easier to start working with the module.
SparkFun Audio Codec Breakout - WM8960 - Qwiic - with connectors - SparkFun BOB-21772.
SparkFun Audio Codec Breakout is equipped with a number of useful features.
Special features of SparkFun Audio Codec Breakout
- Equipped with a Qwiic connector and soldered pins.
- It includes 6 analog inputs that serve as stereo inputs and allow you to connect a microphone.
- It has pins for connecting speakers and a headphone output.
- It is characterized by low energy consumption, which allows the implementation of energy-saving projects.
- It is compatible with Arduino.
Set contents
- SparkFun Audio Codec Breakout - WM8960 - Qwiic - with connectors - SparkFun BOB-21772 - 1 piece
Our offer also includes a version without connectors .
Technical specifications of the module
- Module type: audio player
- Built-in chip: WM8960
- Pins: solder pads / Qwiic connector
- DAC SNR 98 dB, THD -84 dB at 48 kHz, 3.3 V
- ADC SNR 94 dB, THD -82 dB at 48 kHz, 3.3 V
- Class D stereo speaker driver
- <0.1% THD at 1W per channel in 8 Ohm BTL speakers
- 70 dB PSRR at 217 Hz
- Efficiency 87% (output power 1 W)
- Built-in headphone driver
- Output power 40 mW at 16 Ohm at 3.3 V
- THD -75dB at 20 mW, SNR 90dB at 16 Ohm load
- Interface for connecting a microphone
- Pseudo-differential for high noise immunity
- Integrated low noise MICBIAS
- Programmable ALC/Limiter and Noise Gate
- Low energy consumption
- Built-in PLL system
- Sampling rates (kHz): 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48
- Built-in XC6222 3.3V/700mA voltage regulator for AVDD
- 1x 4-pin Qwiic connector
- Communication interface: I2C bus
- I2C address: 0x1A
- Board dimensions: 25.4 x 40.6 mm
- Weight: 4.1 g
The module has soldered connectors.
