SENSORS - Strona 3
Phototransistor TEFT4300 3mm 925nm
Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 925 nm. The reading angle is 30 °. Darkened lens.Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm
A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.Thermostat W1209 with temperature probe -50°C/110°C
Thermostat module with display for controlling devices up to 2300 W based on temperature. Powered by 12 V. Regulates temperature from -50 °C to 110 °C, has outputs of built-in...Temperature and humidity sensor DHT11 - blue module
Module with temperature and humidity sensor with a digital interface. Measuring range: temperature 0-50 °C, humidity of 20-90 %RH. It has connectors for connecting the sensor...Limit switch mini with lever - WK621 - 5 pcs.
Limit switch with curved lever with the length of 18 mm. The maximum operating parameters: voltage of 250 V and current of 5 A. 5 pcs.Limit switch with roller - WK7141
Limit switch with a 5 cm long spring loaded lever ended with a roller. It operates at 250 V and the maximum load is 5 A. The limit switch is used to detect the position of the...MPU-6050 3-axis accelerometer and I2C gyroscope - DFRobot module
Sensor for measuring acceleration and angular velocity in three axes. It is a combination of 3-axis accelerometer and gyroscope. It is characterized by simple operation, it...Rotation sensor, pulser, encoder with button - Iduino SE055
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal on the CLK and DT pins, depending on the...Strain gauge sensor presure force of 50kg
The pressure sensor reduces its resistance when the force put to the square tip, increases. The sensor in the form of a rectangle with the side of 34 mm. For the operation...HX711 - amplifier for tensometers
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.6 V to 5.5 V, communicates via a two-wire bus: the data line and a...Ultrasonic distance sensor HC-SR04 2-200cm + mounting bracket
Ultrasonic sensor operating in the range from 2 cm to 200 cm with special bracket for mounting. It is powered with the voltage of 5 V. The output is a signal whose duration is...Hall sensor AH49E - Waveshare 9522
Module with Hall sensor with analog and digital output. It works with voltage from 2.3 V to 5.3 V. It provides the detection of a magnetic field.Waterproof probe with temperature sensor DS18B20 SENT0002 - 2m
Waterproof probe with DS18B20 digital sensor. Designed for temperature measurement in the range from -55°C to +125°C. Measurement accuracy in the temperature range from -10°C...- Reduced price
- Promotion
Temperature sensor DS18B20+ module - blue
Module with digital thermometer DS18B20+, equipped with 1-wire interface. The measuring range is from -55 °C to 125 °C, the supply voltage is 3.0 V to 5.5 VOptical sensor with LM393 comparator - 10mm
Digital module with optical sensor, with a slit of 10 mm. The module has a built-in LM393 comparator because the output is a digital signal. The supply voltage is 5 V. Along...Aquarium Tank Liquid Water Level Sensor Float Switch 1MPa
The sensor allows you to control the water level in the tank. It consists of a float which, under the influence of a reduction of the volume of the fluid, decreases, causing a...Adapter IDC 10pin 1.25mm - Molex PicoBlade 1.25mm for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on Molex PicoBlade connector with a pitch of 1.25 mm and has four pins for soldering the goldpin of...- Reduced price
- Promotion
Proximity Hall sensor - NJK-5002C 10mm 6-36V
Proximity sensor with Hall effect , with a cable with the length of 110 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...Mini limit sensor switch with lever - WK615 - 5pcs.
Limit switch with lever length 55 mm . The maximum operating parameters are 250 V and 5 A current.Encoder with button - 20 impulse 12mm - EC11 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...Mini PIR HC-SR505 motion sensor
A PIR type sensor allows to detect movement. It is used to detect objects indoors in alarm and lighting systems. The sensor is powered by a voltage from 4.5 V to 15 V....DS18B20 temperature sensor + 4,7kΩ resistors
This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.