- Reduced price
- Sale
- Reduced price
- Sale
SENSORS - Strona 2
Loading...
Waterproof probe with temperature sensor DS18B20 - Okystar - 3m
Waterproof probe based on DS18B20 chip. Power supply voltage is 3 V to 5.5 V . The sensor allows to measure temperature of places distant, difficult to reach from the main...
Index: OKY-16555
Index: OKY-16555
Mounting bracket for distance sensor HC-SR04
Mounting bracket for HC-SR04 distance sensor. Made of transparent acrylic with a thickness of 2.6 mm, it has two mounting holes with a diameter of 3.5 mm.
Index: MOD-04822
Index: MOD-04822
Cover for temperature sensor DS18B20 / LM35 - 6x50 mm
Thermowell for DS18B20, LM35 and other temperature sensors in TO92 housing .
Index: AKS-10612
Index: AKS-10612
Limit switch mini - WK601 - 5 pcs
Limit switch with lever. Maximum operating parameters: voltage of 250 V and current of 5 A. 5 pcs.
Index: PAS-00927
Index: PAS-00927
Phototransistor TEPT4400 3mm 570nm
Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 570 nm. The reading angle is 60 °. T ransparent lens.
Index: UCC-03866
Index: UCC-03866
Limit switch with curved lever - WK330 - 5pcs.
Limit switch with curved lever. The maximum operating parameters are 125V and 1 A.
Index: PAS-02841
Index: PAS-02841
Dust/air quality sensor PM1.0 / PM2.5 / PM10 - PMS5003 - 5V UART
Sensor of dust allows monitoring the air quality, measures the ratio of PM1.0, PM2,5, PM10. Equipped with a sensor that could detect particles with diameter more than 0.3...
Index: MOD-06797
Index: MOD-06797
Limit switch mini with straight lever - WK320
Switch with a simple lever, length of 17 mm. Maximum working voltage is 125 V and current is 1 A. Items are sold in sets of 5 pieces.
Index: PAS-02842
Index: PAS-02842
Photoresistor GL5539 with the resistance of 50 to 100 kΩ, 100 mW of power and a size of 5x2 mm.
Index: SES-04597
Index: SES-04597
Temperature and humidity sensor DHT22 (AM2302) - module + cables
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature -40 to +80 °C, humidity 0-100% RH.
Index: MOD-02637
Index: MOD-02637
Magnetic sensor to open door/window - reed contact CMD918
Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.5 x 18 mm.
Index: SES-03126
Index: SES-03126
ADXL345 3-axis I2C/SPI digital accelerator - module
Sensor for measuring acceleration in three axes in the range +/- 16 g. The module is powered with the voltage from 3 to 5 V, it has the voltage regulator and is communicating...
Index: MOD-01912
Index: MOD-01912
Cable, adapter 3x1 JST, 2mm raster - BLS 2.54mm raster - 5pcs.
Cable, adapter with plug, pitch of 2 mm and the female connector 3x1, 2.54 mm pitch. It is compatible with analog Sharp distance sensors. The cable length is min. 30 cm.
Index: KAB-01923
Index: KAB-01923
Grove - universal 4-pin connector
Universal 4-pin connector for soldering in the PCB. The distance between the pins is 2 mm. Compatible with, among others, the wires from the Grove series. The package contains...
Index: SEE-13343
Index: SEE-13343
NTC 110 10kΩ thermistor 5% - 10pcs.
The NTC 110 thermistor with a resistance of 10 KΩ and a tolerance of 5 %.
Index: SES-04949
Index: SES-04949
BME280 - humidity, temperature and pressure sensor 110 kPa I2C / SPI - 3.3V
Humidity, temperature and pressure sensor powered with the voltage of 3.3 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 10% RH to 100%...
Index: DNG-11803
Index: DNG-11803
Digital light sensor with regulation - photoresistor + potentiometer
Module with photoresistor for Arduino. It is controlled by a digital signal, it is powered with the voltage from 3.3 V to 5 V. On board placed was a potentiometer to adjust the...
Index: GRL-12503
Index: GRL-12503
Sensor processing the intensity of light with a length from the range from 320 nm to 560 nm to the measurable (for example, by the use of microcontroller) proportional...
Index: MOD-02024
Index: MOD-02024
The sensor is used to detect precipitation. It is powered with the voltage of 5 V. It has digital and analog output, making it compatible with most of the commissioning...
Index: MOD-01732
Index: MOD-01732
Reflector for photoelectric sensor 6x4cm
Reflector for photoelectric sensors. The size of the refelector - 40 x 60 x 8 mm.
Index: AKS-10611
Index: AKS-10611
BMP280 - digital barometer, pressure sensor 110kPa I2C/SPI 3,3V
Based on the BMP280 digital pressure sensor with an accuracy of 1 hPa. It has a built-in temperature sensor. The system communicates via the I2C or SPI bus. Measurement range...
Index: MOD-07245
Index: MOD-07245
Sharp GP2D120XJ00F - analog distance sensor 4-30cm
Analog distance sensor (rangefinder) Sharp GP2Y0A41SK0F to detect objects in the range from 4 to 30 cm.
Index: SES-00023
Index: SES-00023
Rotation sensor, encoder with button - module - Waveshare 9533
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal on the SIA and SIB pins, depending on the...
Index: WSR-04483
Index: WSR-04483
Light sensor LDR resistive for Arduino - Okystar
The LDR digital light sensor module is very sensitive to ambient light. Usually used to detect the brightness and intensity of ambient light. The signal detection...
Index: OKY-16560
Index: OKY-16560