SENSORS - Strona 4
Aquarium Tank Liquid Water Level Sensor Float Switch 1MPa
The sensor allows you to control the water level in the tank. It consists of a float which, under the influence of a reduction of the volume of the fluid, decreases, causing a...HX711 - amplifier for a strainer beam - SparkFun SEN-13879
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.7 V to 5.0 V, communicates via a two-wire bus: the data line and a...Optical sensor with LM393 comparator - 10mm
Digital module with optical sensor, with a slit of 10 mm. The module has a built-in LM393 comparator because the output is a digital signal. The supply voltage is 5 V. Along...DS18B20 temperature sensor + 4,7kΩ resistors
This kit consists of one temperature sensor DS18B20 with the 1-wire interface and ten resistors of 4.7 kΩ in the through-hole case.Grove - universal 4-pin connector
Universal 4-pin connector for soldering in the PCB. The distance between the pins is 2 mm. Compatible with, among others, the wires from the Grove series. The package contains...Mini PIR HC-SR505 motion sensor
A PIR type sensor allows to detect movement. It is used to detect objects indoors in alarm and lighting systems. The sensor is powered by a voltage from 4.5 V to 15 V....SHT31 - digital humidity and temperature sensor I2C - Adafruit 2857
Humidity and temperature sensor powered by the voltage from 3 V to 5.0 V with I2C interface. The measurement of temperature is from -40 °C to 125 °C, humidity from 0 to 100 % RH.- Reduced price
- Promotion
Deflection sensor 73x6,3mm - SparkFun SEN-10264
During the bending, sensor increases its resistance. It can be used to detect hand movements, for example, crimping fists. Sensor length is 55 mm.HX711 - amplifier for tensometers
Operational amplifier is designed to handle strain beams. The system is supplied with the voltage from 2.6 V to 5.5 V, communicates via a two-wire bus: the data line and a...Thermometer with LCD display from -50 °C to 100 °C - black
Digital thermometer for mounting on a panel, the LCD display. It works in the range from -50 °C to 100 °C. The probe is on a wire with a length of 1 m. The device is powered by...Rotation sensor, pulser, encoder with button - Iduino SE055
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends a digital signal on the CLK and DT pins, depending on the...Limit switch 50mm - Pololu 1403
SPDT limit switch position with extended metal plate with a length of 50 mm.Encoder with button - 24 impulse 12mm - EC12 vertical - 5pcs.
Knob in the form of an encoder with a button that allows you to create a simple user interface. The module sends the digital signal to two pins depending on the direction of...Waterproof probe with temperature sensor DS18B20 - 1m - Iduino 3DS024
High quality waterproof probe based on DS18B20 chip. The housing is made of stainless steel and has dimensions of 50 x 6 mm. Power supply voltage is from 3 V to 5 V. The cable...Waterproof probe with temperature sensor DS18B20 - 5m
Waterproof probe is equipped with a digital thermometer DS18B20 with a cable with the length of 5 meters.Waterproof probe with temperature sensor DS18B20 SENT0002 - 2m
Waterproof probe with DS18B20 digital sensor. Designed for temperature measurement in the range from -55°C to +125°C. Measurement accuracy in the temperature range from -10°C...- Reduced price
- Promotion
AC current sensor SCT 013-030 - up to 30A
The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...Liquid flow sensor YF-S201 30l/m - thread 1/2''
Sensor of liquid flow operating in the range from 1 to 30 liters per minute. Is supplied with the voltage from 3,5 V to 24 V, the output signal is a frequency proportional to...Limit switch mini - WK310 - 5pcs.
Limit switch without lever. Maximum operating parameters: voltage of 125 V and current of 1 A.Temperature and humidity sensor DHT22 (AM2302) module + cables - Waveshare 11092
Module with temperature and humidity sensor with a digital interface, single-wired. Measuring range: temperature from -40 °C to +80 °C, humidity from 0% to 100 % RH.IR beam interruption sensor - LED 3mm - 0-25 cm
The sensor reacts to an interruption in the beam of infrared light that is transmitted between the transmitter and receiver. The module is equipped with a 3 mm IR LED with...