- New
SENSORS - Strona 42
Optical encoder set for Pololu micro motors - 5V version - 2 pcs - Pololu 2590
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows...Velleman WPSE306N ultrasonic distance sensor 3-550cm
Ultrasonic sensor operating in the range from 3 cm to 550 cm. It is powered with the voltage from 4,5 V to 5 VDC. The output is a signal whose duration is proportional to the...Camera module OV2640 2MPx 1622x1200px 60fps - Waveshare 8532
Module with 2 MPx camera with resolution of 1622 x 1200 px and the frequency of up to 60 frames per second. It extends the capabilities of the microcontroller with the ability...Trim with QTR-3RC reflective sensors - digital - Pololu 2457
Compact bar with three reflective sensors with the size of 32 x 8 mm. It has analog outputs, it is powered with the voltage of 5 V.Whadda WPSE309 - sound sensor - microphone
Sound detector powered by a voltage from 3.3 to 5 V . The module is easy to use, it has two outputs: analogue - enabling measurement of signal intensity and digital -...Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...ACHS-7121 Current Sensor Carrier -10A to +10A - Pololu 4030
Current sensor operating in the range from -10 to 10 A based on the Hall effect. The input voltage from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...38kHz IR Proximity Sensor, Fixed Gain, Low Brightness - Pololu 2579
Proximity sensor, operating in the infrared range. It has a permanent amplification. This version of high brightness, consumes around 16 mA when powered at 5 V. The sensor...High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...DFRobot Gravity - 2x16 I2C LCD display - black with RGB backlight
LCD display 2x16 characters with black backlight, it can display the font in any colour from the RGB palette. Communicates with two-wire I2C bus. The kit includes a cable...Grove - 10kΩ linear sliding potentiometer
Sliding linear potentiometer with a resistance of 10 ohms. Itas a 4-pin Grove connector. The kit includes a cable adapted to Seeedstudio Base Shield v2.0.EcoDuino - set for automatic plant watering - DFRobot KIT0003
Smart device for automatic watering of plants. Thanks to the humidity sensors connected to the controller compatible with Arduino, the module detects when to run the pump which...MPL115A2 - digital barometer, pressure / altitude sensor 115kPa I2C 3-5V - Adafruit 992
Module with digital barometer that provides pressure measurement in the range of 500 to 1150 hPa with the accuracy of up to 1.5 hPa, and altitude of up to 10 km with an...Touch button AT42QT1010 - SparkFun module SEN-12041
A module made by SparkFun with a capacitive touch button based on AT42QT1010 system. It is powered with the voltage in the range from 1.8 V to 5 V. It has a digital output...DFRobot Gravity - 12-position rotary switch V1
The module is equipped with 12-state rotary switch. It is powered with the voltage from 3.3 V to 12 V. The switch uses analog input for reading the output status, which allows...Grove - BME280 - humidity, temperature and pressure sensor 110kPa I2C 3-5V
The Grove module is equipped with a humidity, temperature and pressure sensor powered with the voltage of 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature:...Distance sensor, reflective VMA330 - 3,3V/5V - 40cm
The reflective module with IR sensor equipped with digital output. It works with a voltage from 3.3 V to 5 V. The detection of obstacles is in the range of 2 to approx. 40 cm....Optical encoder set for Pololu micro motors - version 3,3V - 2 pcs - Pololu 2591
A pair of optical quadrature sensors, designed for installation in micro motors from Pololu. It consists of a board with the sensor and the plastic impeller kit, it allows you...DFRobot Gravity - 5.4kΩ slide potentiometer
Slide linear potentiometer with the resistance of 5.4 kΩ. It is equipped with two 3-pin connectors that enable the direct connection of the module to the development board IO...Rotation sensor, encoder - 1024 P/R - SparkFun COM-11102
The encoder generates a signal in Gray code which you can interpret using a microcontroller and read the direction and speed of a rotating shaft. The resolution is 1024 pulses...Limit switch with folding roller - WK7124
Limit switch with a 7 cm long spring loaded lever ended with a folding roller. It operates at 250 V and the maximum load is 5 A. The limit switch is used to detect the position...
