Description: Filament Fiberlogy HIPS 1.75 mm 0.85 kg - Black
Fiberlogy'sHIPS filamentwith a diameter of 1.75mm andweight of 0.85kg, inblack,dedicatedfor 3D printers working in FFF / FDM technology. It is designed to be used as a basic or supporting pillar for other prints that have large overhang or non-standard shapes. It is possible to sand and paint finished prints from HIPS. When using the cartridge as a support material it should be immersed inD-limonenesolution, which will completely dissolve HIPS and leave the rest of the printout in the desired shape.
In our offer of filaments you will also find other materials and colors.
Fiberlogy HIPS 1.75 mm 0.85 kg - Black.
Properties of the HIPS file
The cartridge for3DHIPS printers is lighter in comparison with other materials, has a matt surface and not a glossy one. The filter is dissolved in D-limonene. It is possible to paint it with acrylic paint, glue it, and sand it. Due to its properties it can be used as a support or base material.
Suggested printing parameters with filament
| Printing temperature | From 230°C to 245°C |
| Table temperature | From 80°C to 100°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Technical specifications and physical properties of the pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Black |
| Printing temperature | From 230°C to 245°C |
| Table temperature | From 80°C to 100°C |
| Material | HIPS |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Sample prints from the HIPS filament
Sample prints.
Useful links |
