- New
Product description: Filament Spectrum AquaPrint 1.75 mm 0.5 kg - Natural
Spectrum 's AquaPrint filament wound on a spool has a weight of 0.5 kg and a diameter of 1.75 mm. Is is an innovative support material for 3D printing complex models, characterized by excellent solubility in cold water and exceptional thermal stability. Its almost four times greater flow and twice the bond strength compared to PVA shortens printing and dissolution times. Provides excellent adhesion to various materials such as PLA , PETG , PA and TPU and easy removal after printing. Additionally, AquaPrint is more stiff than traditional support filaments , which facilitates the transfer of material from the extruder to the hotend, especially in Bowden systems, and allows for the creation of solid supports . Dual extruder 3D printer users can seamlessly combine AquaPrint with a variety of materials thanks to its simple printing setup. Its biodegradability allows for responsible disposal, and the ability to print complex structures makes it an ideal choice for demanding 3D projects.
Filament Spectrum AquaPrint 1.75 mm 0.5 kg - Natural.
The filament is characterized by solubility in cold water.Properties of the AquaPrint filament
- Excellent solubility in cold water
- Biodegradable once dissolved
- High structural stiffness
- Flow rate 4x faster than PVA
- Exceptional thermal stability
- Excellent adhesion to various materials (PLA, PETG, PA, TPU)
Filament use
- Complex geometries requiring support material
Suggested filament printing parameters
| Printing temperature | from 190°C to 215°C |
| Table temperature | from 25°C to 70°C |
| Print speed | from 20 to 50 mm/s |
| Heated table | Required |
| Heated working chamber | Not required |
Due to differences in the design of printers, the above data should be treated as guidelines, and the appropriate values must be determined experimentally.
Technical specifications and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Dimensional tolerance of the filament | +/- 0.03 mm |
| Color | Natural |
| Printing temperature | From 190°C to 215°C |
| Table temperature | From 25°C to 70°C |
| Material density | From 0.6 to 0.9 g/cm³ |
| Print speed | From 20 to 50 mm/s |
| Spool - material | AquaPrint |
| Outer diameter of the spool | 200mm |
| Spool width | 55mm |
| Mounting hole diameter | 52mm |
| Packaging | Cardboard with print |
| Desiccant | Yes |
| Vacuum packaging | Yes |
| Spool dimensions | 200 x 52 x 55 mm |
| Net weight | 0.5kg |
