Product description: Filament Polymaker PolyTerra PLA 1.75 mm, 1 kg - Banana
PolyTerra PLA filament is a completely biodegradable and environmentally friendly material that will surely appeal to 3D printing enthusiasts. The filament combines organic materials with PLA while reducing the amount of plastic it contains. The product was wound on a 100% recycled cardboard spool . PolyTerra PLA is a durable, easy-to-print filament , and the models made of it are characterized by a matte finish. On one spool there is 1 kg of Banana -colored filament, and its diameter is 1.75 mm .
Finished prints have a matte finish.
Polymaker PolyTerra PLA filament 1.75 mm, 1 kg - Banana.
The future is in your hands!
Polymaker is aware of the harmful impact of plastic on our planet and is launching new environmentally friendly PolyTerra PLA filaments with a reduced amount of plastic. This is a step forward on the road to improving the condition of our planet. The company has also committed to planting one tree for each reel sold , in the area where it was purchased. This is to "compensate" the Earth for the carbon dioxide emitted during the production of the material.
Features of PolyTerra PLA filament
- Biodegradable
- Environmentally friendly
- Supplied on a cardboard spool
- Durable
- Waterproof
- Odorless
- Easy to print
- With a matte finish
- With very good adhesion between layers
- With low shrinkage
On the spool there is 1 kg of filament with a diameter of 1.75 mm.
Suggested filament printing parameters
| printing temperature | From 190°C to 230°C |
| table temperature | From 25°C to 60°C |
| Cooling | recommended |
| Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Color | banana |
| Print speed | From 30mm/s to 70mm/s |
| printing temperature | From 190°C to 230°C |
| table temperature | From 25°C to 60°C |
| Material density | 1.31g/cm³ |
| Spool - material | PolyTerra PLA |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 1 kg |
Useful links |
