ELECTRONICS - Strona 127
Antenna WiFi 6dBi U.FL for LattePanda
WiFi antenna 6 dBi with a U. FL connector allowing to connect it to the minicomputer LattePanda.9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1 - Adafruit 3387
The sensor is a combination of 3-axis digital gyroscope, accelerometer and compass. It allows you to measure acceleration, magnetic field and angular velocity in the...Literal markers for cable 5mm - 1300pcs
Set for marking wires with a diameter of 5 mm. Contains 50 pieces of markers with letters from A to Z in orange.LED indicator 12V DC - 8mm - yellow
LED light, working voltage 12 V DC. It has a diameter of 8 mm.LED indicator 230V AC - 28mm - blue
LED light, operating voltage 230 V AC. It has a diameter of 28 mm.LED indicator 24V DC - 28mm - red with a buzzer
Indicator light operating at 24 V DC. It has a diameter of 28 mm.3pin 250V electric cube - orange
The electric 3-pin cube that allows to connect the wires with a voltage of 250 V in a simple way, without the need of using the tools.Thread Bobbin - 12m - SparkFun DEV-13814
Spool with the smooth conductive thread. The thread is made of stainless steel fiber and wound on a plastic reel. The thread has a resistance of 27 Ω per meter. Price...Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...Magnetic sensor - reed contact CMD615
Wireless proximity sensor activated magnetically. Case dimensions 15 x 6.5 mm.Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - Adafruit 3405
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...Step-Up/Step-Down Voltage Regulator S9V11MA - 2,5-9V 1,5A - Pololu 2869
Miniature boost converter module supplied with voltage from 3 V to 16 V . Output voltage adjustable from 2,5 V to 9 V. Maximum current 1,5 A. Dimensions: 15 x 13 x 6 mm....ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red / green
A flat monostable switch with green/red backlight. Contact load is 2 A for 250 V.ON-OFF switch monostable - PBW-12BPW - 2A / 250V - flat red
A flat monostable switch with the red backlight. Contact load is 2 A for 250 V.ON-OFF switch monostable - PBW-12BPW - 2A / 250V - green
A salient, monostable switch with the green backlight. Contact load is 2 A for 250 V.ON-OFF bistable switch - PBW-16APS - 2A 250V - flat red round
Flat bistable button with red illumination in the form of the ring. Contact load is up to 2 A for 250 V.ON-OFF switch monostable - PBW-16BPW - 2A 250V - green / red
Monostable salient switch with the green/red backlight. Contact load is 2 A for 250 V.DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...Feather Huzzah ESP32 - WiFi module, Bluetooth GPIO - soldered connectors - Adafruit 3591
The wi-fi module and Bluetooth, based on the system ESP32. On board is 8 GPIO ports with support for I2C and SPI, analog input and a connector with a 3.7 V lipol battery. It...Ribbon cable 14 colored wires IDC raster 1.27 mm - roll 30.5 m
IDC 14 core ribbon cable. Raster: 1.27 mm. Roll: 30,5 m .Ribbon cable 16 colored wires IDC raster 1.27 mm - roll 30.5 m
IDC ribbon cable, 16-vein. Pitch: 1,27 mm. Roller: 30.5 m.- Sale
- SPECIAL OFFERS
Filament Spectrum PETG 1,75mm 1kg - Lion Orange
Filament made of PETG is used as a cartridge for 3D printers. The diameter is 1.75 mm. The set includes 1kg filament in color Lion Orange, length of approx. 340 m. It requires...GSM antenna - quad-band - SMA - Sparkfun - CEL-00675
Quad antenna operating in the GSM band, it has a male SMA connector. It works in the frequencies ranging from 850 MHz to 1900 MHz. Length is 57.4 mm.DFRobot Gravity - digital crash sensor (right)
The module is equipped with limit switch with lever with roller, it is designed for Arduino. It is powered with the voltage of 5 V.
