- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 85
Loading...
H2 High-Power 36v11 CS - single channel 60V/11A DC motor controller - Pololu 2993
High-current H-bridge DC motor driver with MOSFET transistors. Supports voltages from 5V to 60V and provides up to 11A continuous current without the need for a radiator....
Index: PLL-25651
Index: PLL-25651
Industrial 8-channel relay module from Waveshare, communicating via RS485 interface and supporting Modbus RTU protocol. Relays allow switching devices with voltage of 230...
Index: WSR-25685
Index: WSR-25685
Soft Power Switch Mk2 - JST 2mm - power switch - SparkFun PRT-26993
The SparkFun Soft Power Switch Mk2 is a passive On/Off power switch that allows you to power up and safely shut down your system with short presses of the button. While a...
Index: SPF-25853
Index: SPF-25853
reCamera 2002w - 8GB - OV5647 5MPx camera - AI-Vision - WiFi/Bluetooth - Seeedstudio 102991896
reCamera 2002w with 8 GB eMMC memory is a compact and programmable AI camera based on RISC-V processor, offering AI computing power at the level of 1 TOPS . It supports...
Index: SEE-25881
Index: SEE-25881
Microphone 50-56dB 9/4,5mm - THT - 10 pcs.
Height h: 4.5 mm. Diameter Ø: 9 mm. Sensitivity: 50-56 dB. Pins for soldering to the printed circuit board.
Index: UCC-00740
Index: UCC-00740
TB6552FNG - two-channel motor controller
Two-channel bridge H. Continuous current per channel 0.8 A, temporary to 1 A. Maximum supply voltage 15 V. SSOP-16 (SMD) housing.
Index: UCC-00777
Index: UCC-00777
Infrared receiver TSOP4838 - 38kHz
IR receiver TSOP4838, it is operating at a frequency of 38 kHz.
Index: SES-01047
Index: SES-01047
Step-Down Voltage Regulator D24V3F5 - 5V 0,3A - Pololu 2098
Step-down converter with 5 V output voltage. Maximum current up to 300 mA. Supply voltage in the range of 6 V - 42 V.
Index: PLL-01331
Index: PLL-01331
AVR Programming Board is designed for programming microcontrollers from the Atmel AVR family in cased: DIP8, DIP20, DIP28, DIP40.
Index: MOD-01357
Index: MOD-01357
Extension cord for servos 13,5cm
Extension cable for servos with the length of 13,5 cm.
Index: KAB-01386
Index: KAB-01386
ACS711EX current sensor -31A do +31A - Pololu 2453
Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
Pogo Pin - pointed - SparkFun PRT-09174
Spring, with the pointed tip, pin, is intended for connection and testing the modules with the pins for the goldpin straps without the need of soldering.
Index: SPF-01753
Index: SPF-01753
HDMI adapter (plug) - DVI-I (socket)
HDMI (plug) - DVI -I (slot)adapter lets you connect devices equipped with DVI output with the HDMI input.
Index: KAB-02158
Index: KAB-02158
Sound detector - microphone - SparkFun SEN-12642
Audio detector powered with the voltage ranging from 3.5 to 5.5 V. The module is easy to use, it has three outputs: an analog - to measure the intensity of the signal, digital...
Index: SPF-02211
Index: SPF-02211
Arcade Joystick - SparkFun COM-09182
4-way, large joystick for arcade games. The device is based on four micro-switches.
Index: SPF-02222
Index: SPF-02222
Force sensor round 15mm - short connector - Pololu 2728
Pressure sensor reduces its resistance when the force put to the round tip, increases. The s ensor with the short connector, round, with about 15mm diameter.
Index: PLL-02348
Index: PLL-02348
RedBot - line sensor (line follower) - SparkFun SEN-11769
Addition to the RedBot Kit extending the robot with the ability to detect the line. The sensor detects light reflected from the surface and on its basis determines the color of...
Index: SPF-02411
Index: SPF-02411
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
RFID / NFC MiFare Classic Tag white - 13,56MHz - Adafruit 360
The RFID /NFC identifier in the form of a white marker, is equipped with NXP S50 chip. Each chip has a unique 32-bit code. The devices work at a small distance from the...
Index: ADA-02952
Index: ADA-02952
Step-Down Voltage Regulator D24V10F3 - 3,3V 1A - Pololu 2830
A step-down pulse inverter module with an efficiency of 80 % - 93 %. Converts the input voltage from 3.4 V to 36 V to an output value of 3.3 V. The maximum continuous current...
Index: PLL-03018
Index: PLL-03018
Tensometric beam NA27 1kg (10N)
Strain-gauge beam operating in the range of up to 1 kg (approx. 10 N). The smallest version is used, for example, in kitchen scales, portable scales. The connecting cable has...
Index: SES-03097
Index: SES-03097
USB BLE-Link - Bluetooth 4.0 Low Energy module
The Bluetooth BLE module with USB plug which can be connected to the computer with the operating system supporting BT 4.0. The device allows remote programming of Arduino...
Index: DFR-03176
Index: DFR-03176
A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
Graphical OLED color display 0.95 '' (A) 96x64px SPI - angled connectors - Waveshare 10507
0.95" OLED colour display with 96 x 64 px resolution. The screen based on the SSD1331 controller works with voltages of 3.3 V and 5 V and communicates via SPI. It has...
Index: WSR-04427
Index: WSR-04427