Over 15 years

professional experience

Easy returns

up to 30 days

Over 1 000 000

shipped orders

Fast shipping

all across the EU

Wishlist

RC-GSM control unit - for remote opening/closing garage doors - Elektrobim

Index: ELB-20045 EAN: 5904422379926

Ask a question

Remove from wishlist Add to wishlist

The RC-GSM module produced by Elektrobim is a controller for garage door operators. Enables remote opening and closing of automated swing gates, sliding gates and garage doors using a smartphone. RC-GSM control module allows you to control the drive from anywhere (which is within range of mobile telephony).

€80.90

€65.77 tax excl.

Notify me when available

Check quantity

Manufacturer: Elektrobim

Product description: RC-GSM control module - for remote opening / closing garage doors - Elektrobim

The RC-GSM module produced by Elektrobim is a controller for garage door operators. Enables remote opening and closing of automated swing gates, sliding gates and garage doors using a smartphone. RC-GSM control module allows you to control the drive from anywhere (which is within range of mobile telephony). The controller is powered by DC voltage in the range of 9 V to 24 V. It is characterized by high versatility, so it works with a wide range of drives, such as ETM or KSE. What is important, the RC-GSM module works on many frequencies - 850 / 900 / 1800 / 1900 MHz. In addition, it is extremely simple to install and configure, and its operation is easy and trouble-free. For proper operation of the device requires a mini-SIM card to receive calls. The card is not part of the kit, it must be purchased separately.

Moduł sterujący RC-GSM - do zdalnego otwierania oraz zamykania bram garażowych od firmy Elektrobim.

RC-GSM control module - for remote opening and closing garage doors from Elektrobim.

In our offer you will also find linear actuators, which can be used to automate garage doors.

Features of the RC-GSM from Elektrobim

Full control, which allows you to remotely open and close the gate from anywhere on earth
Versatility, as the module can be operated by a wide range of voltages and is compatible with many garage door operators
Operation on multiple frequencies: 850 / 900 / 1800 / 1900 MHz
Receiving calls with a prepaid mini-SIM card. The use of the card is required for proper operation of the controller. The card is not a part of the set, it has to be purchased separately.

Technical specification of the RC-GSM module

Type: controller
Purpose: for swing, sliding and garage door operators
Supply range of the controller: from 9 V to 24 V DC
Maximum current consumption: 50 mA at 12 V power supply
Controller outputs: NC / NO
Operating frequency: Quad-band 850 / 900 / 1800 / 1900 MHz
Supported SIM card size: mini-SIM (not included)
Operating temperature range: from 20°C to 60°C
Controller dimensions: 82 x 76 x 27 mm

Voltage to	9.0 V
Voltage from	24.0 V
Sensor - type	motor driver
Smart Home	Gate controller
Communication	GSM
Package width	13 cm
Package height	10 cm
Package depth	3 cm
Package weight	0.214 kg

Send us your question

Krzysztof 04/11/23	Question: Hello, the controller during setup sends an SMS confirming the execution of the command sent to it for which a fee is charged to the SIM card installed in the controller. Will the opening or closing of the gate by an authorized no. send such an sms and generate additional costs on the SIM card of the controller, or is it possible to disable this somehow. Greetings
	Answer: The device can, during normal operation, send notifications with information about the status of the output relay, and then the SMS will indeed be charged. However, in order for this to happen, this function must be enabled in the controller. By default, it is disabled. When configuring the device's settings, SMS messages are indeed sent back informing about the status of the execution of the configuration command sent to the controller. But if the PrePaid card runs out of funds, the device will stop sending back these messages, but the commands will be executed normally (except for inquiries about the status of the device, numbers stored on specific positions, GSM network signal strength, etc.). - i.e. all those that require sending back an SMS with the specific information being asked of the controller). It will still be possible to configure the device, such as adding and deleting numbers in the authorized list, but the controller will not send back confirmation of the command execution.