- New
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
ELECTRONICS - Strona 86
Loading...
Mini switch Push MOSFET SV 4,5-40V/4A - with protection before reverse current - Pololu 2809
Pushbutton module as an alternative to mechanical buttons. The switch is bistable, one press turns the power on and another press turns it off. Additional inputs enable e.g....
Index: PLL-04854
Index: PLL-04854
VCNL4010 - distance and light sensor 20cm I2C - Adafruit 466
A digital sensor measuring the distance ranging up to 20 cm and the intensity of the incident light. It communicates via the I2C bus (TWi), it works with a voltage of 3.3 V and...
Index: ADA-04969
Index: ADA-04969
PIR motion detector MCE32 220-240V
The PIR sensor detects movement. It is used to automatically control lighting or other devices. The sensor works on infrared. It is activated by the movement of a heat emitting...
Index: MOD-05185
Index: MOD-05185
Electrolytic capacitor 220uF/25V 6x12mm 105C THT - 10pcs.
Through hole electrolytic capacitor of 220 uF / 25 V. Pins' pitch: 3.5 mm. Size: Ø6 x 12 mm. Price is for 10 pieces.
Index: PAS-05290
Index: PAS-05290
WTA 5x20mm fuse - 250V/0.1A - 10pcs
Fuse type 5 x 20 mm operating up to 250 V, allowing up to 0.1 A current flow. Price per 10 pieces.
Index: KAB-05468
Index: KAB-05468
Gravity - microwave sensor for motion detection V2.0 - DFRobot SEN0192
The sensor uses the Doppler effect to detect the movement of objects. By using microwaves instead of infrared, it is possible to detect objects reflecting waves in the...
Index: DFR-05497
Index: DFR-05497
Rotary switch 4-positions 2 circuits - 30mm
Four-state rotary switch for housing equipped with 10 contacts. Total height is 29.5 mm.
Index: UCC-06163
Index: UCC-06163
Eight-segment display x2 - 14mm red - common anode
Dual 8-segment display two digits along with points and some characters.
Index: LCD-06434
Index: LCD-06434
- Sale
Eight-segment display x1 - 10mm red - common anode
Single 8-segment display displays digits with points and some characters.
Index: LCD-06443
Index: LCD-06443
Rubber conductive rubber cable for measuring the tensile force - Adafruit 519
Conductive rubber wire with a diameter of 2 mm and a length of 1 meter. It is used to measure the stretching strength. During the stretching of the element, its resistance...
Index: ADA-06549
Index: ADA-06549
Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.
Index: DFR-06613
Index: DFR-06613
ArduCam OV7675 0,3MPx 640x480px - camera module
The camera module with the matrix OV7675 0,3 MPx with a resolution of 640x 480 px and a speed of up to 60 frames per second. The device has the lens of 1/9", it communicates...
Index: ACM-06840
Index: ACM-06840
Light control sensor MCE35 - 2300W
The sensor is used to turn on and off lights depending on the brightness level of the environment. Its operation i not influence neither by the temperature nor by the...
Index: MOD-07009
Index: MOD-07009
Module with analog-digital multiplexer 74HC4051 - SparkFun BOB-13906
Module with 8-channel multiplexer CD74HC4051 allows you to connect up to 8 signals to a single analog output. The system can work as a demultiplexer and work with digital...
Index: SPF-07192
Index: SPF-07192
DFRobot Gravity: Voice Recorder Module
Vioce recorder module based on ISD1820. It has a built-in microphone and a jack connector for speakers or headphones. Built-in functions allow you to record and playback audio...
Index: DFR-07437
Index: DFR-07437
The module is equipped with an equalizer MSGEQ7. It a llows you to add audio detection for Arduino sound. It has 7 frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25...
Index: DFR-07443
Index: DFR-07443
HeadAmp 2016 set + Noise Reduction
Headphone amplifier is an official product of YouTube channel Noise Reducer. The kit contains a main board with soldered SMD components and a set of THT components for...
Index: MSX-07507
Index: MSX-07507
DFRobot TCS34725 RGB Color Sensor For Arduino
A module that allows you to make the function to determine the color of ambient light. Applied sensor TCS34725 with a LED backlight and a built-in IR filter. It communicates...
Index: DFR-07591
Index: DFR-07591
Adapter DC 5.5/2.1mm with switch - 4 plugs
Extension cable with one female 5,5 / 2,1 mm slot and four male 5.5 / 2.1 mm plugs. It has mounted switch on the cable. It can be used, i.a. to power many LED strips from one...
Index: KAB-08136
Index: KAB-08136
- Sale
Index: KAB-08173
Tinycontrol LANKON-094 - relay module 4x10A /coil 5V for GSM/LAN controller - for DIN rail
The module is equipped with 4 RELPOL RM50 relay a coil supplied with a voltage of 5V, with optical isolation input and mounting holes. The system is designed to work with LAN...
Index: TNC-08293
Index: TNC-08293
RGB LED strip WS2813 - digital, addressed - IP65 60LED/m, 18W/m, 5V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 60 LEDs per meter. Each pixel can emit a color from 24-bit palette.
Index: LED-08734
Index: LED-08734
TMP102 - I2C temperature sensor - SparkFun SEN-13314
Module with digital TMP102 thermometer in the range from -40 °C to 125 °C, equipped with I2C interface (TWI). The supply voltage ranges from 1.4 V to 3.6 V.
Index: SPF-08804
Index: SPF-08804
Switch with key - 5A / 250V 2-position
The rotary switch is switched with the key. Mounting diameter is equal to 19 mm and a length is of 25 mm.
Index: NSZ-09798
Index: NSZ-09798