- New
- Reduced price
- Sale
- Reduced price
- Sale
Case for Raspberry Pi Zero x2 - Mini Cluster - open - PiHut TPH-067
Index: PIH-21312
- Reduced price
- Sale
ELECTRONICS - Strona 175
Loading...
Motor Connector SHIM Cable, manufactured by PiMoroni, intended primarily for connecting micro motors with the SHIM controller. The cable is terminated with a JST-ZH 2-pin...
Index: PIM-21843
Index: PIM-21843
The Adafruit module is equipped with the TCA8418 chip working as a matrix keyboard controller. The chip has a total of 18 I / O pins in a 10 column and 8 row arrangement...
Index: ADA-21996
Index: ADA-21996
USB type C - HDMI cable - 1,8m - Akyga AK-AV-18
The Akyga USB C - HDMI cable allows you to send image and sound from a mobile device to any monitor. It is adapted to support 4K Ultra HD , thanks to which the transmitted...
Index: RCO-22283
Index: RCO-22283
Lead expander - 8-channel - with I2C multiplexer - PCA9548 - STEMMA QT / Qwiic - Adafruit 5626
Module with a multiplexer equipped with the PCA9548 chip, which is a replacement for the popular TCA9548A chip. It allows you to connect up to 8 separate I2C digital buses...
Index: ADA-22391
Index: ADA-22391
Step down converter 1,8V-5,1V 18A 60W - adjustable - DFRobot DFR1025
The DC-DC converter from DFRobot lowers the input voltage in the range from 9 V to 15 V and allows you to obtain a voltage from 0.6 V to 5.1 V. What's more - the module also...
Index: DFR-22930
Index: DFR-22930
ACS724 current sensor carrier 0A to 20A - Pololu 4044
The ACS724 sensor is a module offering precise measurement of linear current from 0 A to 20 A in one direction. Thanks to the use of technology based on the Hall effect, it...
Index: PLL-23637
Index: PLL-23637
DAC - AD5693R - 16-bit - I2C - STEMMA QT/Qwiic - Adafruit 5811
A product from Adafruit equipped with a 16-bit AD5693R digital-to-analog converter, which is responsible for converting the digital signal from any microcontroller...
Index: ADA-23979
Index: ADA-23979
Glass2 Unit - with transparent 1,51'' 128x64px OLED display - M5Stack U158-B
Glass2 Unit is a module with a 1.51" OLED display and an SSD1309 controller. The display area is 35.5 x 18 mm and the screen resolution is 128 x 64 px . Moreover, the...
Index: MSS-24054
Index: MSS-24054
Seeedstudio's aluminum heatsink kit designed specifically for the Xiao ESP32-S3 Sense and compatible Xiao series models . Thanks to the use of thermally conductive...
Index: SEE-25684
Index: SEE-25684
Cable for analog distance sensors Sharp - female end - Pololu 1798
Cable with plug for analog distance Sharp sensors with a female tip. Length: 30 cm
Index: PLL-00528
Index: PLL-00528
Thumb Joystick with button - SparkFun COM-09032
A joystick similar to analog devices used for example in PlayStation 2 controllers. It has the possibility of detecting movement in two directions and the button is activated...
Index: SPF-01634
Index: SPF-01634
Keyboard panel 2x2 - compatible with LEDs - SparkFun COM-07836
Overlay for the keyboard with 2x2 - 4 keys. Under each button, you can mount the LED in the through hole case of 3 or 5 mm. It allows you to create panel of keys with the...
Index: SPF-02273
Index: SPF-02273
- Discontinued product
Bluefruit LE UART Friend - Bluetooth Low Energy (BLE 4.0) - Adafruit 2479
The board with a Bluetooth Low Energy module and the remote communication interface UART.
Index: ADA-03955
Index: ADA-03955
- Discontinued product
- SPECIAL OFFERS
DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
NTC 110 100kΩ thermistor with 1m wire
Thermistor of NTC 110 type with a resistance of 100 kΩ. The connecting cable has a length of 1 meter.
Index: SES-04941
Index: SES-04941
LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809
Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g, ±8 g / ±16 g. Powered with the voltage from 3 V to 5 V. It communicates over the I2C or SPI bus.
Index: ADA-05295
Index: ADA-05295
DFRobot Gravity - module with Power LED
Module with a very bright LED diode. Voltage supply 5 V. When operating consumes approx. 20 mA. It w orks with Arduino modules.
Index: DFR-07442
Index: DFR-07442
- Discontinued product
DRV8833 DC/Stepper Motor Driver Breakout Board - Adafruit 3297
Dual channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 2 A). Supply voltage ranges from 2.7 V to 10.8 V.
Index: ADA-07665
Index: ADA-07665
Set of copper heatsinks for LattePanda with thermoconductive tape
Set includes five heatsinks, made of copper, which provide cooling for the minicomputer LattePanda . They have a self-adhesive layer of thermoconductive tape.
Index: DFR-08365
Index: DFR-08365
LED indicator 12V AC/DC - 19mm - green
LED light, operating voltage 12 V AC/DC. It has a diameter of 19 mm.
Index: LED-09006
Index: LED-09006
- Discontinued product
- SPECIAL OFFERS
DFRobot Gravity - analog signal isolator
The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
DFRobot Gravity - 2x16 I2C LCD display with RGB backlight - for Arduino
LCD display 2x16 characters with backlight in any color palette RGB. It communicates with the two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion...
Index: DFR-09538
Index: DFR-09538
ON-OFF switch monostable - PBW-16BP - 2A 250V - green round
Monostable salient switch with the green backlight in the shape of a ring. Contact load is 2 A for 250 V.
Index: AKS-10815
Index: AKS-10815
DFRobot Gravity - digital pressure sensor 1kg (10N)
Pressure sensor for Arduino works in the range of up to 1 kg. It is based on HX711, it has 24-bit analog-to-digital converter designed to scale weight and control applications...
Index: DFR-11280
Index: DFR-11280