- Reduced price
- Sale
Filament Polymaker PolyTerra PLA Dual Flamingo 1,75mm 1kg - Pink-Red
Index: PLM-23947
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
Arduino Shield - extension - Strona 2
Loading...
Forbot Robot Shield for Arduino
Forbot Robot Shield is an extension board for Arduino, which is adding to it, everything what's necessary for making robot. On board of the module, found can be, i.a. the...
Index: FOR-07901
Index: FOR-07901
DFRobot 4x Relay - Shield for Arduino v2.1
Overlay with four relays that can be controlled directly from Arduino via digital outputs. Additionally, there is a socket on the board to connect XBee wireless communication...
Index: DFR-02731
Index: DFR-02731
Grove - Mega Shield v1.2 - Arduino Shield
The overlay for Arduino Mega extends the capabilities of I/O pins. Adapted to the modules and sensors of the Grove series. It is equipped with 4-pin Grove connectors, as well...
Index: SEE-15263
Index: SEE-15263
Ethernet network module Shield v1.0 for Arduino Nano
This module allows to connect Arduino Nano microcontroller to Ethernet network. On the board there is RJ-45 Ethernet socket for network cable and soldered goldpin pins...
Index: DNG-19944
Index: DNG-19944
Screw Shield v3 - screw connectors for Arduino - Iduino EX027
Overlay consisting of two boards bringing out all Arduino pins on screw connectors, to which you can connect a wire with a screwdriver. Additionally there are analog and...
Index: OST-14327
Index: OST-14327
DFRobot DRV8825 - 2-channel stepper motor driver 45V/2,5A - Shield for Arduino
Arduino overlay for controlling two stepper motors via the popular DRV8825. On the board there is a socket for connecting XBee wireless modules and clamp connectors for easy...
Index: DFR-02690
Index: DFR-02690
SX1509 - GPIO expander 16 I/O for Arduino - SparkFun BOB-13601
Expansion board with 16 GPIO pins together with I2C interface what means that to fully use all pins you only need to connect two wires to the microcontroller. SX1509 has also...
Index: SPF-11147
Index: SPF-11147
16-channel servo driver, 12-bit PWM I2C - Shield for Arduino - Adafruit 1411
16-channel PWM generator, it is useful when there is not enough outputs of the microcontroller. Allows for i.a.: control of the servos, speed adjustment of motors or change the...
Index: ADA-02448
Index: ADA-02448
DFRobot RS232 - Shield for Arduino
Shield for Arduino, which allows data transfer via popular RS232 protocol. It has installed DB9 slot.
Index: DFR-02992
Index: DFR-02992
Velleman VMA209 sensors LM35 + DS18B20 - multifunctional shield for Arduino
Shield for Arduino with 7 segment LED display 4 digits, 4 SMD LEDs, 3 independent buttons, buzzer, interfaces for sensors LM35 and DS18B20, interface IR receiver,...
Index: VEL-13897
Index: VEL-13897
- Reduced price
- SPECIAL OFFERS
Joystick Shield v1.A - Shield for Arduino
Module with a joystick and buttons connected directly to the ports on Arduino. It is supplied with2-axes lever and six buttons. It has built-in I2C connector, Bluetooth,...
Index: MOD-08234
Index: MOD-08234
DFRobot Ethernet W5200 v1.1 microSD - Shield for Arduino
Module based on W5200 chip enabling Arduino users to easily connect to Ethernet network. It works with Arduino Uno and Mega 2560 and also has a microSD card reader.
Index: DFR-02990
Index: DFR-02990
- Reduced price
- SPECIAL OFFERS
DFRobot Gravity converter prądowo current-voltage 0-25/0,3V
Module from the Gravity series enables the processing of the current signal from 0 mA to 25 mA into a voltage signal from 0 V to 3V. The sensor may be connected to the...
Index: DFR-12471
Index: DFR-12471
VNH5019 2-channel motor driver 24V/12A - Shield for Arduino - Pololu 2507
Shield for Arduino with two drivers of DC motors VNH5019. The module operates with voltages between 5.5 V up to 24 V. Maximum continuous output current is 12 A (short-term: 30...
Index: PLL-02262
Index: PLL-02262
JoyStick Shield V1.A for Arduino - Iduino ST1124
Iduino module with joystick and buttons connected directly to Arduino connectors. It has two-axis joystick knob and six buttons, as well as I2C, Bluetooth, nRF24L01 and Nokia...
Index: OST-14296
Index: OST-14296
Zumo v1.2 - minisumo robot KIT for Arduino - Pololu 2509
Fighting education robot for self-assembly. The platform has the opportunity to plug in Arduino Uno or Leonardo modules. The kit includes: main board Zumo Shield, a chassis...
Index: PLL-02937
Index: PLL-02937
Cytron MD10 - 1-channel motor driver 30V/10A - Shield for Arduino
Shield for Arduino with single-channel driver for DC motors operating with a voltage from 7 V to 30 V and current up to 10 A (short term 15 A). It has NMOS H-Bridge. The board...
Index: CTN-12401
Index: CTN-12401
DFRobot Mega Multi IO Shield For Arduino Mega / DUE
The board allows to connect 4 shield type addons to Arduino Mega 1280 / 2560 / ADK. Each shield uses different pins, so you can avoid conflicts that may occur when connecting...
Index: DFR-07183
Index: DFR-07183
FeatherWing datalogger - RTC PCF8523 + microSD Shield for Feather - Adafruit 2922
The module is powered via battery and with the real-time clock RTC PCF8523 and a slot for microSD memory cards. FeatherWing extends the capabilities of the modules from Feather...
Index: ADA-05591
Index: ADA-05591
Cytron Shield-MDD10 - two-channel DC motor driver - 7V-30V/10A - Shield for Arduino
A module that allows you to control two DC motors or one stepper motor using Arduino. The overlay allows you to adjust the direction and speed of motors with current...
Index: CTN-14815
Index: CTN-14815
DFRobot RGB LED driver - Shield for Arduino
Shield for Arduino allows you to control multi-color RGB LED strip. Circuit board has 3 PWM output for each color component of RGB, it is also equipped with an IR receiver,...
Index: DFR-04276
Index: DFR-04276
Gravity - Screw Shield V2 - overlay with screw connectors for Arduino - DFRobot DFR0171
Gravity - Screw Shield V2 is a Shield overlay for Arduino that acts as a lead expander . It extends the Arduino with screw connectors, so you can attach wires to them for a...
Index: DFR-19900
Index: DFR-19900
ATSAMD09 Seesaw I2C - extension for Arduino and Raspberry Pi - Adafruit 3657
Seesaw ATSAMD09 is a universal framework transducer which expands the number of pins for microcontrollers or microcomputers with I2C interface. It extends the board with...
Index: ADA-10319
Index: ADA-10319
- Sale
- SPECIAL OFFERS
E-Paper Raw Panel Driver Shield - Shield for e-Paper Display for Arduino - SPI - Waveshare 15082
Universal shield for connection of displays e-Paper for modules of Arduino or Nucleo. For communication, it uses SPI interface. It works with a voltage of 3.3 V and 5 V.
Index: WSR-13460
Index: WSR-13460
- Reduced price
- SPECIAL OFFERS