- New
- Sale
- Sale
- Reduced price
- Sale
- Sale
- Sale
Arduino Shield - extension - Strona 3
Loading...
DFRobot LED Keypad Shield - Shield for Arduino
Shield for Arduino with 4-digit ,8-segment display with common cathode. In addition, the board has 5 buttons. The device operates with 5 V voltage.
Index: DFR-05516
Index: DFR-05516
Ethernet and PoE Shield - W5500 - Ethernet and PoE Shield for Arduino - DFRobot DFR0850
Shield for Arduino board made by DFRobot company. It extends Arduino capabilities by adding Ethernet communication and PoE module . It allows users to connect the Arduino to...
Index: DFR-20069
Index: DFR-20069
DFRobot RGB LED driver - Shield for Arduino
Shield for Arduino allows you to control multi-color RGB LED strip. Circuit board has 3 PWM output for each color component of RGB, it is also equipped with an IR receiver,...
Index: DFR-04276
Index: DFR-04276
E-Paper Raw Panel Driver Shield - Shield for e-Paper Display for Arduino - SPI - Waveshare 15082
Universal shield for connection of displays e-Paper for modules of Arduino or Nucleo. For communication, it uses SPI interface. It works with a voltage of 3.3 V and 5 V.
Index: WSR-13460
Index: WSR-13460
DFRobot - SIM7600CE-T 4G (LTE) - shield do Arduino
Shield for Arduino module which allows you to send text messages and create calls in the GSM network. It is also equipped with GPS and LTE module. It communicates via UART...
Index: DFR-14047
Index: DFR-14047
Cytron SHIELD-2AMOTOR - 2-channel motor driver 26V/2A - shield for Arduino
Shield for Arduino with dual-channel DC motor driver operating with a voltage of 5 V to 26 V and current up to 2 A, based on the L298P circuit. The board has jumpers for...
Index: CTN-12404
Index: CTN-12404
Velleman VMA201 Proto Shield + mini breadboard 170 holes - shield for Arduino
Shield for Arduino Uno Rev3 and derivatives, which allows you to create your own systems (shields). It has led out all the connectors and two LEDs, and a button at the user's...
Index: VEL-13015
Index: VEL-13015
DFRobot Gravity RS485 IO Expansion Shield - Shield for Arduino
Shield for Arduino, which extends the abillities of pins of the I/O. It has, i.a. a slot for XBee modules and service of modules of SD cards, APC220 radio modules, Bluetooth,...
Index: DFR-13315
Index: DFR-13315
Velleman VMA202 - DataLogger with SD card reader - Shield for Arduino
Shield for Arduino with RTC DS1307 and a slot for SD memory cards. It can be used as a data logger, it has a place for a round CR1220 battery and for additional modules. It...
Index: VEL-13016
Index: VEL-13016
- Reduced price
- SPECIAL OFFERS
Gravity - IO Sensor Shield V2.4 - I/O Leads Extension for Arduino Mega - DFRobot DFR0165
Gravity - IO Sensor Shield is an I/O pinout extension in the form of an overlay for Arduino. It has 3 Xbee slots, 1 microSD slot, headers and leads for connecting extensions....
Index: DFR-19897
Index: DFR-19897
Capacitive touch screen TFT 2,8" 240x320px with microSD reader - Shield for Arduino - Adafruit 1947
Overlay for Arduino with capacitive TFT touch screen. Its diagonal is 2.8" , resolution is 240 x 320 px . The display has LED backlighting and individual pixel control,...
Index: ADA-17671
Index: ADA-17671
Giga Display Shield - overlay with 3,97'' touchscreen - Arduino ASX00039
Overlay with a 3.97'' color touch screen designed for the Arduino Giga board. In addition to the display, the overlay offers additional functions in the form of a digital...
Index: ARD-24065
Index: ARD-24065
ePaper Breakout Board - ePaper display driver for Seeed Xiao - Seeedstudio 105990172
ePaper Breakout Board is an extension designed for the Seeed Xiao series , enabling seamless control of ePaper displays . It has a 24-pin FPC connector and an additional...
Index: SEE-24130
Index: SEE-24130
Cytron PS2 with PS2 controller connector - Shield for Arduino
Shield for Arduino with connectors of the controller of the PS2 console. It communicates through UART interface. It supports wired and wireless controllers. The board has...
Index: CTN-13210
Index: CTN-13210
Overlay for Arduino produced by DFRobot which allows to control two 35V / 2A DC motors . Equipped with L298P chip that allows to control direction and speed of connected...
Index: DFR-19896
Index: DFR-19896
MyoWare 2.0 Arduino Shield - SparkFun DEV-18426
The MyoWare 2.0 shield for Arduino is equipped with six 3.5 mm TRS Jack connectors , to which you can connect MyoWare 2.0 sensors or the Link Shield using the TRS - TRS...
Index: SPF-21287
Index: SPF-21287
- Sale
Wio Tracker 1110 Dev Board - developer kit for Meshtastic - Seeedstudio 114993370
Wio Tracker 1110 Dev Board is an advanced development kit designed to create low-power tracking devices based on the Meshtastic LoRa Mesh network. The Wio Tracker 1110...
Index: SEE-25283
Index: SEE-25283
Keypad Shield v2.0 - display module for Arduino - RGB text - DFRobot DFR0936
The Keypad Shield v2.0 module from DFRobot is dedicated to Arduino boards. The RGB LCD display shows content in two rows of 16 characters . The user can configure the color of...
Index: DFR-22464
Index: DFR-22464
TB9051FTG - 2-channel motor driver 28V/2.6A - Shield for Arduino - Pololu 2520
Modul with dual driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2.6 A per channel (max. 5 A). The system can be connected directly with...
Index: PLL-12435
Index: PLL-12435
Dual Channel Isolated CAN HAT for Raspberry Pi enables stable CAN 2.0 communication with MCP2515 and SI65HVD230 . Equipped with a digital isolator, built-in power...
Index: WSR-25291
Index: WSR-25291
RS232 Pal - two-channel UART to RS232 converter - MAX3232E - Adafruit 5987
The RS232 Pal from Adafruit is a versatile board designed to convert UART voltage levels to RS232 , ideal for working with retro equipment, industrial devices and telecoms....
Index: ADA-25271
Index: ADA-25271
M3S550 - triple motor controller DC 22V/1,7A - for Arduino - Pololu 5069
Shield designed to work with Arduino, which allows you to control three DC motors powered with voltage from 1.8 V to 22 V. It communicates via the I2C interface . The...
Index: PLL-23648
Index: PLL-23648
Infrared transmitter and receiver module - 940nm + 38kHz - STEMMA JST PH 2mm - Adafruit 5990
Compact module from Adafruit that allows both emission and reception of infrared signals (940nm, 38kHz). Equipped with two high-power LEDs , it supports a range of up to...
Index: ADA-25272
Index: ADA-25272
SparkFun Ardumoto - Motor Driver Shield - L298 - hat for Arduino - SparkFun DEV-14129
SparkFun Ardumoto is a shield designed for use with Arduino that allows you to control up to two DC motors . It is equipped with the popular L298 H-bridge, thanks to...
Index: SPF-23852
Index: SPF-23852
- Sale