Converters - Strona 3
RTC PCF8563 I2C - real-time clock - Waveshare 3707
The module is equipped with chip PCF8563. It provides accurate and independent intervals. Operating voltage is from 1.8 V to 5.5 V. It allows you to read the time in hours,...MCP23018-E/SP - 16-Bit I/O Expander with Open-Drain Outputs
The system allows to increase the number of pins (up to 16) of the microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...RS485 CAN HAT - overlay for Raspberry Pi - Waveshare 14882
Shield for Raspberry Pi, version 4B / 3B+ / 3B / 2B / Zero / Zero W with system SN65HVD230 which allows communication between CAN and SPI and the SP3485 system that...MSX RTC DS1307 I2C - real time clock
Module with real time clock and backup battery (battery included). It allows you to read the time in hours, minutes, and seconds, date: month, day, year. The communication...RS485 - Ethernet converter - Cortex M0 - Waveshare 16529
Device that allows communication between RS485 and Ethernet RJ45 interface. Module can be configured by web page, AT commands, serial protocol and network protocol. It is...MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...MCP23S08-E/P - GPIO expander SPI 8-channel
The chip allows to increase the number of pins (up to 8) of a microcontroller (including Raspberry Pi minicomputer). It communicates with the CPU via the SPI bus.Converter USB A - RS-232 Akyga AK-CO-02 - 1m
One-way USB A to RS-232 converter with a 1m cable. It allows to connect a laptop and computer with devices communicating via RS-232 interface, such as some printers,...RTC DS1307 + 32kb EEPROM 24C32 I2C - real-time clock with memory
Module with real time clock and backup battery. It allows you to read the time in hours, minutes, and seconds, date: month, day, year. It has 32 KB of EEPROM. The...MSX FT232RL - USB-UART FTDI 3,3/5V converter
The converter allows for communication between USB and UART interfaces. It allows to exchange data between PC and board with microcontroller. The module is based on...MCP3424 - ADC 18-bit 4-channel I2C converter
Module with analog-digital converter, delta-sigma type with 18-bit precision. It is equipped with four channels with differential inputs. It works at speed of up to 240 samples...SN65HVD230 CAN Board - Waveshare 3945
The module based on the SN65HVD230 allows connecting a microcontroller to the CAN bus. The chip is pinout compatible with the PCA82C250. The module is powered by 3,3 V and...Module NE555 - regulated frequency generator
The module works as a timer, pulse generator or oscillator application. It can be used as a time delay. Works with voltages from 5 V to 12 V. Board size: 30 x 13 mm.MCP23008-E/P - 8-channel I2C pin expander
The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...Converter USB-UART CP2102 - microUSB port - Waveshare 11325
Converter enables the communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...Grove - DS1307 real-time clock I2C
Module from Grove features a real time clock DS1307, which voltage is supplied by a round CR1225 battery (not included) . It allows you to read the time in hours, minutes,...Converter RS232 - UART with connector DB9 - MAX3232 3,3V/5V
RS232 to UART serial interface converter with 9-pin D-SUB connector . The implementing circuit is the popular MAX3232.Converter USB-UART FTDI FT232RL - miniUSB socket - Waveshare 6646
Converter provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers. The...MAX98357A decoder stereo DAC I2S - SparkFun DEV-14809
The stereo decoder's module DAC to communicate through the I2S interface. Built-in class D amplifier can provide up to 3.2 W of power to the speakers or headphones with...FT232H - USB converter for UART, SPI, I2C, GPIO - Adafruit 2264
Board allows you to communicate with the modules and sensors directly from the computer. It supports the most popular interfaces: UART, I2C, SPI, it also has some GPIO pins.Converter USB-UART FTDI FT232RL - microUSB port - Waveshare 11324
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....8-channel bi-directional logic level converter
The module allows you to exchange data between systems that use the most popular voltages: from 3.3 V to 5.5 V and vice versa. Eight channels allow for connection of various...Logic level bi-directional converter, 4-channel - Pololu 2595
Miniature (13 x 10 mm). the module allows to exchange data between systems that use the most popular voltage levels ranging from 1.5 V to 18 V and Vice versa. Four channels to...See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras
- Memory cards & disks
- Communication
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Motor drivers and servos
- Integrated circuits
- Displays and screens
- Consoles
