- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
- Reduced price
- Sale
M5Stamp Pico DIY Kit - development kit with ESP32-PICO-D4 - M5Stack
Index: MSS-20159
- Reduced price
- Sale
Converters - Strona 2
Loading...
FT232RL SP-880 - USB converter - RS232 COM +/-6V with DB9 connector - Adafruit 18
Adapter on 140 cm cable allows you to connect devices with RS232 connector to the computer through the USB connector. The module appears to the operating system as a virtual...
Index: ADA-04371
Index: ADA-04371
Load Sensor Combinator (Ver. 1.1) - SparkFun BOB-13878
The module allows you to connect 4 load sensors - strain-gauge beams to one of the bridge via 4-wire cable. It finds application, for example, in the construction of the...
Index: SPF-07277
Index: SPF-07277
UART Converter - RS485 3.3V - ARK/RJ11 - Waveshare 4777
Converter allows you to connect the microcontroller via the RS-485 bus which supports up to 32 devices on a line length up to 1 km with a speed up to 10 Mbps. The module is...
Index: WSR-04496
Index: WSR-04496
Bus Pirate v3.6a - SparkFun TOL-12942
The device allows you to connect the computer with electronic modules, using the popular data transfer protocols, e.g. SPI, I2C, UART. It improves the process of communication...
Index: SPF-01707
Index: SPF-01707
- Reduced price
- SPECIAL OFFERS
RTC PCF8523 I2C - real time clock - Adafruit 3295
Module with real time clock and backup battery. It is used in applications written to register data, in clock, alarms, etc. Communication interface is an I2C bus.
Index: ADA-07662
Index: ADA-07662
MCP4728 DAC I2C converter - 4 channels + EEPROM - Adafruit 4470
Digital-to-analogue converter based on MCP4728 chip. It allows to obtain 4 analog outputs from any microcontroller equipped with I2C interface, e.g. Arduino. The...
Index: ADA-16457
Index: ADA-16457
TXB0108 - two-way, 8-channel logic converter - Adafruit 395
The module is based on a TXB0108 system, it allows you to exchange data between systems that use the most popular voltage levels: 3.3 V and 5V. It has eight channels, it...
Index: ADA-02468
Index: ADA-02468
Converter RS232 - UART with connector DB9 - SP3232 3.3V/5V - Waveshare 3965
Converter of serial interface RS232 to standard UART with 9-pin D-SUB connector. Control system is a popular SP3232. The module operates with a supply voltage range from 3.0 V...
Index: WSR-04475
Index: WSR-04475
Serial Basic - USB-UART converter CH340G - microUSB socket - SparkFun DEV-14050
The converter based on the CH340 chip allows communication between USB and UART interfaces. It allows data exchange between a computer and a microcontroller board. It operates...
Index: SPF-08802
Index: SPF-08802
USB - DuPont converter for Lidar TFmini / TFmin Plus sensor
UART converter enabling connection of Lidar TFmini or TFmini Plus distance sensor with a computer via USB cable. There is also cable for connection with the sensor included.
Index: BEN-15876
Index: BEN-15876
Converter USB-UART CP2102 - miniUSB port - Waveshare 8085
Converter which provides communication between the serial interfaces USB and UART. It allows to exchange data between the computer and the systems which use microcontrollers....
Index: WSR-04925
Index: WSR-04925
TCA9548A - module with multiplexer I2C - Adafruit 2717
Module with a multiplexer TCA9548A allows you to connect 8 different digital I2C interface to one interface. Working voltage from 3 V to 5 V, the address of the output I2C bus...
Index: ADA-04915
Index: ADA-04915
Four-channel opto-isolator A87 TLP281
4-channel opto-isolator designed to connect digital systems such as microcontrollers 5 V for high voltage systems. Maximum input voltage is 24 V.
Index: MOD-09909
Index: MOD-09909
Real-time clock that allows to read time in hours, minutes, and seconds, date: month, day, year. The communication interface is I2C bus, THT case DIP8.
Index: UCC-02764
Index: UCC-02764
Velleman WPI301 - DS1302 SPI - real-time clock - 2 pcs.
Module with real time clock and backup battery. It allows you to read the time in hours, minutes, and seconds, date: month, day, year. The communication interface is the SPI...
Index: VEL-13018
Index: VEL-13018
Module with analog-digital multiplexer 74HC4051 - SparkFun BOB-13906
Module with 8-channel multiplexer CD74HC4051 allows you to connect up to 8 signals to a single analog output. The system can work as a demultiplexer and work with digital...
Index: SPF-07192
Index: SPF-07192
Digital-to-analog converter with I2C interface. The module allows you to receive signals in the form of analog voltage on any microcontroller that supports I2C. Powered with...
Index: GRL-12805
Index: GRL-12805
Voltage divider 5V/25V for Arduino
A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
RTC PCF8563 I2C - real-time clock - Waveshare 3707
The module is equipped with chip PCF8563. It provides accurate and independent intervals. Operating voltage is from 1.8 V to 5.5 V. It allows you to read the time in hours,...
Index: WSR-04495
Index: WSR-04495
MCP23018-E/SP - 16-Bit I/O Expander with Open-Drain Outputs
The system allows to increase the number of pins (up to 16) of the microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06506
Index: UCC-06506
MSX RTC DS1307 I2C - real time clock
Module with real time clock and backup battery (battery included). It allows you to read the time in hours, minutes, and seconds, date: month, day, year. The communication...
Index: MOD-02717
Index: MOD-02717
RS485 - Ethernet converter - Cortex M0 - Waveshare 16529
Device that allows communication between RS485 and Ethernet RJ45 interface. Module can be configured by web page, AT commands, serial protocol and network protocol. It is...
Index: WSR-15133
Index: WSR-15133
MCP4725 DAC I2C converter - SparkFun BOB-12918
Digital-to-analog converter with I2C interface. The module allows you to receive signal in the form of analog voltage from any microcontroller that has I2C. It is powered with...
Index: SPF-02275
Index: SPF-02275
MCP23S08-E/P - GPIO expander SPI 8-channel
The chip allows to increase the number of pins (up to 8) of a microcontroller (including Raspberry Pi minicomputer). It communicates with the CPU via the SPI bus.
Index: UCC-04589
Index: UCC-04589
See also
- Computer accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras
- Memory cards & disks
- Communication
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Motor drivers and servos
- Integrated circuits
- Displays and screens
- Consoles