- New
- New
- New
- Reduced price
- Sale
- Reduced price
- Sale
SENSORS - Strona 14
Loading...
BleBox windSensor Pro - WiFi wind sensor
The BleBox windSensor Pro sensor allows you to measure the instantaneous, maximum and average wind speed from 0.5 m/s to 30 m/s (from 1.8 km/h to 108 km/h). Measurement data...
Index: BOX-22834
Index: BOX-22834
Grove - gesture sensor PAJ7620U2 - 5V I2C
Module from the Grove series, is equipped with a gesture sensor PAJ7620U2 with I2C interface. It can recognize 9 basic gestures. It is powered with the voltage of 5 V. It has a...
Index: SEE-11312
Index: SEE-11312
Gravity - Analog temperature and humidity sensor - SHT30 - DFRobot DFR0588
Analog temperature and humidity sensor produced by DFRobot. The module is equipped with a high quality new generation SHT30 chip from Sensirion. It uses CMOSens...
Index: DFR-19383
Index: DFR-19383
Module with sensor BME680 from Bosch, it includes measurement of temperature, humidity, pressure and gases. It is able to measure humidity from 10% to 90% RH , pressure from...
Index: ADA-10872
Index: ADA-10872
BleBox humiditySensor v2 - WiFi temperature and humidity sensor
BleBox humiditySensor v2 is a small sensor that communicates via a local WiFi network, allowing you to measure relative humidity and air temperature . Thanks to the wBox...
Index: BOX-22885
Index: BOX-22885
VL6180X time-of-flight - distane and ambient light sensor I2C - Pololu 2489
A digital sensor combining time-of-flight proximity measurement and the ability to measure ambient light intensity. It operates up to 10 cm with a resolution of 1 mm. It...
Index: PLL-04856
Index: PLL-04856
Panel thermometer with LCD display from -50 to 110 degrees Celsius and measuring probe - 10m
Electronic thermometer powered by two lozenge type batteries (LR44). The device has a 10 meter long cable ended with a probe for temperature measurement. Temperature...
Index: BNT-19570
Index: BNT-19570
HB100 - Microwave Motion Sensor
Microwave sensor that detects the motion. It is used to detect objects in the premises in alarm systems and lighting systems. The sensor is powered with the voltage from 4.75...
Index: MOD-07561
Index: MOD-07561
Laser dust/air sensor PM2.5 / PM10 SDS018 - 5V UART/PWM
A laser dust sensor for monitoring air quality. It detects particles larger than 0.3 μm in diameter and measures PM2.5 and PM10. It features a fan for air suction. The system...
Index: SEN-08332
Index: SEN-08332
Fermion - SHTC3 I2C temperature and humidity sensor - DFRobot SEN0414
The SHTC3 temperature and humidity sensor on the Fermion series DFRobot board. The SHTC3 can measure humidity from 0% to 100% RH with an accuracy of ±2% RH and temperature...
Index: DFR-20677
Index: DFR-20677
Velleman WPSE306N ultrasonic distance sensor 3-550cm
Ultrasonic sensor operating in the range from 3 cm to 550 cm. It is powered with the voltage from 4,5 V to 5 VDC. The output is a signal whose duration is proportional to the...
Index: VEL-13022
Index: VEL-13022
Laser distance sensor Lidar TFMini-S UART / I2C - 12m
Laser distance sensor that measures precisely from 0.1 m to 12 m with an accuracy of 0.06 m. The blind spot has been reduced to 10 cm. The sensor communicates through the...
Index: BEN-15862
Index: BEN-15862
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380
Waterproof probe with temperature sensor DS18B20 - 3m - brown - silicone
Waterproof probe is equipped with a digital thermometer DS18B20 with cable with the length of 3 meters. Version with silicone wire is characterized by the greater strength.
Index: DNG-10937
Index: DNG-10937
Gravity - segment display 4-digital I2C - green - DFRobot DFR0645-G
Four-digit, 8-segment Gravity series display with adjustable 8-level brightness levels, The modules are equipped with an I2C port compatible with the Gravity...
Index: DFR-16309
Index: DFR-16309
Inductive proximity sensor LJ12A3-2-Z / AX 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...
Index: DNG-11860
Index: DNG-11860
DFRobot Gravity - analogue EMG sensor, electromyograph -OYMotio.n
The EMG sensor was created in collaboration between DFRobot and OYMotion. The EMG sensor is an electromyograph, a sensor of the electrical activity of human muscles and...
Index: DFR-10833
Index: DFR-10833
Gravity - DHT22 digital temperature and humidity sensor - DFRobot SEN0137
DFrobot's DHT22 digital humidity and temperature sensor module provides precise measurements and has a short response time combined with high reliability and resistance to...
Index: DFR-15760
Index: DFR-15760
Temperature sensor - thermistor NTC-MF52 - Iduino ST1147
Module with temperature sensor equipped with a thermistor NTC-MF52. In order to read values from the sensor, connect it to the analog signal of the microcontroller. It detects...
Index: OST-14322
Index: OST-14322
Extender/Active Terminator LTC4311 - I2C signal amplifier - Adafruit 4756
I2C signal amplifier in the form of Adafruit module. It provides the user with faster data transmission , without the need for additional cables. In addition, it allows...
Index: ADA-18234
Index: ADA-18234
Tilt / shock sensor - Iduino SE059
The tilt sensor detects changes in position. It can work as a shock sensor. The m odule for communication uses the digital output . It w orks with voltage of 5 V.
Index: OST-14325
Index: OST-14325
QTR-8A reflectance sensor array- analog - Pololu 960
Strap of the eight reflecting sensors with analog outputs. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00152
Index: PLL-00152
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
Whadda WPSE309 - sound sensor - microphone
Sound detector powered by a voltage from 3.3 to 5 V . The module is easy to use, it has two outputs: analogue - enabling measurement of signal intensity and digital -...
Index: VEL-13023
Index: VEL-13023