Set - Creality Hi 3D Printer + 4x Creality Hyper PLA Filament
Index: CRL-27627
- New
- Reduced price
- Pack
- Sale
- Reduced price
- Sale
- Sale
- Sale
- Reduced price
- Sale
SENSORS - Strona 15
Loading...
Extender/Active Terminator LTC4311 - I2C signal amplifier - Adafruit 4756
I2C signal amplifier in the form of Adafruit module. It provides the user with faster data transmission , without the need for additional cables. In addition, it allows...
Index: ADA-18234
Index: ADA-18234
Tilt / shock sensor - Iduino SE059
The tilt sensor detects changes in position. It can work as a shock sensor. The m odule for communication uses the digital output . It w orks with voltage of 5 V.
Index: OST-14325
Index: OST-14325
Gravity: Analog High Temperature Sensor
Analog sensor of the high temperature, operating in the range from 30 °C to 350 °C. It is powered with a voltage of 3.3 V to 5.5 V. The kit has a PT100 probe.
Index: DFR-06613
Index: DFR-06613
QTR-8A reflectance sensor array- analog - Pololu 960
Strap of the eight reflecting sensors with analog outputs. It is powered with the voltage of 5 V or 3.3 V.
Index: PLL-00152
Index: PLL-00152
DFRobot Gravity - VEML7700 digital ambient light sensor - I2C
The module is compatible with Arduino, equipped with a digital light sensor with a resolution of 16-bit, it is powered with the voltage in the range from 3.3 V to 5.5 V. It...
Index: DFR-09528
Index: DFR-09528
DFRobot Gravity - CO2 carbon dioxide sensor - electrochemical
The sensor determines the concentration of CO2 (carbon dioxide) in the air. It is equipped with digital and analog output that works with voltage of 5 V. The kit includes a...
Index: DFR-04487
Index: DFR-04487
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
Module with digital temperature sensor MLX90614ESF-BAA-000-TU-ND
Sensor that uses IR to measure temperature in the range from -70 °C to 380 °C. It is communicating via the I2C bus. The voltage ranges from 3.0 V to 5.0 V.
Index: GRL-13443
Index: GRL-13443
Humidity and Temperature Sensor Breakout - Si7021 - SparkFun SEN-13763
Humidity and temperature sensor powered by the voltage from 1.9 V to 3.6 V with I2C interface. The measurement of temperature is from -10°C to 85°C, humidity from 0 to 80% RH.
Index: SPF-06554
Index: SPF-06554
- Sale
- SPECIAL OFFERS
Inductive proximity sensor LJ12A3-2-J / DZ 2mm 90-250VAC
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mmI. It is powered...
Index: DNG-11866
Index: DNG-11866
Inductive proximity sensor E2S-H4N1 4mm 10-30V
The E2S-H4N Inductive Proximity Sensor allows metal detection up to 4 mm away. It has a 200 cm cable length. The response time is less than 1 ms and the switching...
Index: DNG-17435
Index: DNG-17435
Gravity - segment display 4-digital I2C - red - DFRobot DFR0645-R
4-digit, 8-segment Gravity series display , allows you to adjust the brightness of the displayed characters, thanks to 8-stage adjustment, The device has an I2C port...
Index: DFR-16310
Index: DFR-16310
Grove - air purity sensor MP503 v1.3
Air purity sensor from Groveseries. It is used for detecting slightly toxic gases such as carbon monoxide, alcohol, acetone, thinner, formaldehyde and other.
Index: SEE-04415
Index: SEE-04415
Waterproof probe with temperature sensor DS18B20 - Okystar - 20m
Waterproof probe with DS18B20 digital sensor. It is powered from 3 V to 5.5 V . The sensor allows to measure temperature of places distant, difficult to reach from the...
Index: OKY-15864
Index: OKY-15864
Velleman WPSE303 - soil moisture sensor + liquid level sensor - analog
A set of two sensors of: soil moisture and liquid's level. Powered with the voltage of 5 V. T he sensor's output is an analogue voltage which increases its value along with the...
Index: VEL-13019
Index: VEL-13019
- Reduced price
- SPECIAL OFFERS
Camera module for Arduino 5 MPx with a resolution of 2592 px x 1944 and speeds up to 120 frames per second. It extends the capabilities of the microcontroller with the ability...
Index: ACM-06558
Index: ACM-06558
Aluminum, lightweight (1.3 g) mounts for Sharp distance sensors GP2Y0A02, GP2Y0A21 and GP2Y0A41. Mounts are equipped with mounting holes for M3 screws. Price includes set of 2...
Index: PLL-07985
Index: PLL-07985
Grove - Thumb Joystick with a button - module with a plate
The module is equipped with a joystick similar to analog devices used, for example, in game controllers. It has the possibility of detecting movement in two directions and the...
Index: SEE-11357
Index: SEE-11357
DFRobot Gravity - MP3 player - JQ8400-FL UART
Module that allows you to play music files directly from the 8 MB device memory . It supports MP3 and WAV formats. It communicates with the microcontroller via the UART...
Index: DFR-12358
Index: DFR-12358
ACHS-7123 Current Sensor Carrier -30A to +30A - Pololu 4032
Current sensor operating in the range from -30 to 30 A, based on the Hall effect. Input voltage is from 4.5 V to 5.5 V. The sensor is designed to use in systems of 5 V.
Index: PLL-14234
Index: PLL-14234
DFRobot Gravity SEN0224 - LIS2DH - 3-axis I2C accelerometer
Sensor for measuring acceleration in three axes in the range +/- 2 g , +-4 g, +g -8 or +-16 g . The module is powered with the voltage from 3.3 to 5 V, it has a voltage...
Index: DFR-08831
Index: DFR-08831
AHT20 - temperature and humidity sensor I2C - Adafruit 4566
Module with temperature and humidity sensor AHT20 , which communicates via I2C interface. It allows to measure temperature from -40°C to 85°C with an accuracy of 0.3°C...
Index: ADA-17199
Index: ADA-17199
Inductive proximity sensor E2S-H4N1 4mm 5V
Inductive proximity sensor E2S-H4N1 with 200 cm cable. Enables detection of metal up to a distance of 4 mm . The switching frequency is 1000 Hz and the response time is...
Index: DNG-17436
Index: DNG-17436
A simple tilt sensor with digital output. It operates from 3.3V to 5V and works with Arduino and Raspberry Pi modules.
Index: SEE-11358
Index: SEE-11358