- New
- Reduced price
- Sale
STM32 NUCLEO-L152RE module - Low Power STM32L152RET6 ARM Cortex M3
Index: DIS-02216
- Reduced price
- Sale
- Sale
- Sale
SENSORS - Strona 16
Loading...
A simple tilt sensor with digital output. It operates from 3.3V to 5V and works with Arduino and Raspberry Pi modules.
Index: SEE-11358
Index: SEE-11358
DFRobot Gravity: Analog 20A Current Sensor
Current sensor operating in the range up to 20 A and up to 311 Volts on the basis of the Hall effect. The output is an analog voltage. The supply voltage is 5 V.
Index: DFR-08367
Index: DFR-08367
Module from the Grove series, based on the system LM2904 and a microphone. It can be powered with a voltage ranging from 3.5 V to 10 V. The output is the analog signal. The...
Index: SEE-11332
Index: SEE-11332
AC current sensor SCT 013-100 - to 100 A
The sensor providing the measurement of alternating current flowing in the pipeline without the need to pull off the isolation. The measurement occurs through the insulation on...
Index: OST-14262
Index: OST-14262
MPRLS - pressure sensor 172kPa I2C 3-5V - Adafruit 3965
A pressure sensor that provides measurement in closed spaces using the cable. It communicates using the I2C interface. The measuring range of pressure is from 0 to 172 kPa. It...
Index: ADA-12999
Index: ADA-12999
Fermion - AHT20 temperature and humidity sensor - DFRobot SEN0527
The Fermion series tile is equipped with the AHT20 system, which allows for precise measurements of air temperature and humidity . The module uses the I2C bus and the...
Index: DFR-21922
Index: DFR-21922
DFRobot Gravity - voltage divider 1/5
A voltage divider is used, when the measured voltage has a larger value than the range of A/D converter. The device works in the range from 0,0245 V to 25 V. The output...
Index: DFR-11261
Index: DFR-11261
DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...
Index: DFR-07455
Index: DFR-07455
High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07470
Index: SES-07470
NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.
Index: SES-04942
Index: SES-04942
BleBox Probe - waterproof temperature probe for BleBox sensors - 1m
A temperature probe manufactured in Poland by BleBox . This waterproof probe is designed for use with BleBox thermoBox and saunaBox sensors. The BleBox Probe allows for...
Index: BOX-20183
Index: BOX-20183
NTC 10kΩ thermistor with 3m cable
Thermistor of the NTC type with a resistance of 10 kΩ. The connecting cable has a length of 3 m.
Index: DNG-10930
Index: DNG-10930
VCNL4010 - distance and light sensor 20cm I2C - Adafruit 466
A digital sensor measuring the distance ranging up to 20 cm and the intensity of the incident light. It communicates via the I2C bus (TWi), it works with a voltage of 3.3 V and...
Index: ADA-04969
Index: ADA-04969
Romi - Magnetic Encoders set for Romi Chassis - 2 pieces - Pololu 3542
A pair of magnetic quadrature sensors, designed for mounting on Romi Chassis. Consists of a plate with the Hall sensor and the plastic rotor with magnets, a set of makes up...
Index: PLL-07350
Index: PLL-07350
Tension beam YZC-1B (97) 40kg (400N)
A load cell operating up to 40 kg (approx. 400 N). Used for kitchen scales and portable scales, for example. The connecting cable has stripped ends and is 32.5 cm long.
Index: DNG-13170
Index: DNG-13170
Temperature sensor - thermistor NTC-MF52 with potentiometer - Iduino SE017
Module with temperature sensor equipped with a thermistor NTC-MF52. For control, used is an analogue or digital output. It detects the temperature in the range from -55°C to...
Index: OST-14291
Index: OST-14291
Grove AHT20 - temperature and humidity sensor - I2C - - Seeedstudio 101990644
The Grove AHT20 is a new generation sensor, enabling even more accurate measurements. The AHT20 has a newly designed ASIC with an improved MEMS semiconductor moisture...
Index: SEE-16595
Index: SEE-16595
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on the microUSB connector that allows to connect the sensor directly to the computer. The module is...
Index: DNG-13445
Index: DNG-13445
BME680 multi-functional 4in1 environmental sensor - SPI / I2C - DFRobot SEN0375
A 4-in-1 MEMS multifunctional environmental sensor manufactured by DFRobot. It features an embedded BME680 chip. The module is a combination of a volatile organic compound...
Index: DFR-19199
Index: DFR-19199
Grove - temperature and humidity sensor DHT22 (AM2302)
Module with temperature and humidity sensor with a digital single-wire interface. Measuring range: temperature -40 °C to +80 °C, humidity is from 0% to 100 % RH.
Index: SEE-13334
Index: SEE-13334
2mm slit sensor - Iduino SE056
Digital module with optical sensor with a slit of 2 mm. The output is a digital signal. The supply voltage is 5 V. With the encoder's shield, it can be used as a device...
Index: OST-14323
Index: OST-14323
APDS9960 Proximity, Light, Color and Gesture Sensor - STEMMA QT/Qwiic - Adafruit 3595
The sensor, which can detect simple gestures, light of the surroundings, color and approaching obstacles. The device communicates with a microcontroller via the I2C bus. It...
Index: ADA-09815
Index: ADA-09815
- Reduced price
- SPECIAL OFFERS
DFRobot Gravity - water vapor sensor
The vapor sensor is compatible with Arduino. When the humidity increases, output voltage increases. It can be used in projects such as a rain detector or touch sensor based on...
Index: DFR-11285
Index: DFR-11285
Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...
Index: SPF-10116
Index: SPF-10116