- Reduced price
- Promotion
Weather Shield - weather station for Arduino - SparkFun DEV-13956
Index: SPF-10199
- On sale!
- Promotion
SENSORS - Strona 17
Loading...
MPRLS - pressure sensor 172kPa I2C 3-5V - Adafruit 3965
A pressure sensor that provides measurement in closed spaces using the cable. It communicates using the I2C interface. The measuring range of pressure is from 0 to 172 kPa. It...
Index: ADA-12999
Index: ADA-12999
Inductive proximity sensor E2S-H4N1 4mm 5V
Inductive proximity sensor E2S-H4N1 with 200 cm cable. Enables detection of metal up to a distance of 4 mm . The switching frequency is 1000 Hz and the response time is...
Index: DNG-17436
Index: DNG-17436
NTC 110 10kΩ thermistor with cable
The NTC 110 thermistor with the resistance of 10 kΩ. The connecting cable has a length of 50 cm.
Index: SES-04942
Index: SES-04942
Inductive proximity sensor LJ12A3-2-Z / AX 2mm 6-36V
Inductive, digital proximity sensor with a cable with the length of 100 cm and nuts to facilitate mounting. It detects metal at a distance of up to 2 mm. The object detection...
Index: DNG-11860
Index: DNG-11860
High temperatura probe PT1000 - 6x50mm
Waterproof analogue sensor with the high temperature working in the range from -30 °C to 500 °C. The output is resistance dependent on temperature. Probe length is 50 mm.
Index: SES-07470
Index: SES-07470
Module from the Grove series, based on the system LM2904 and a microphone. It can be powered with a voltage ranging from 3.5 V to 10 V. The output is the analog signal. The...
Index: SEE-11332
Index: SEE-11332
- Reduced price
- Promotion
Gravity - segment display 4-digital I2C - red - DFRobot DFR0645-R
4-digit, 8-segment Gravity series display , allows you to adjust the brightness of the displayed characters, thanks to 8-stage adjustment, The device has an I2C port...
Index: DFR-16310
Index: DFR-16310
AHT20 - temperature and humidity sensor I2C - Adafruit 4566
Module with temperature and humidity sensor AHT20 , which communicates via I2C interface. It allows to measure temperature from -40°C to 85°C with an accuracy of 0.3°C...
Index: ADA-17199
Index: ADA-17199
Grove - a set of 5 female-female 4-pin - 2mm/20cm I2C splitters
A set of five 4-pin wires Grove. With them you can connect two I2C Grove modules to one connector of the I2C bus, for example on the Base Shield v2 board. Cables are compatible...
Index: SEE-04396
Index: SEE-04396
DFRobot Gravity - water vapor sensor
The vapor sensor is compatible with Arduino. When the humidity increases, output voltage increases. It can be used in projects such as a rain detector or touch sensor based on...
Index: DFR-11285
Index: DFR-11285
IDC 10pin 1,27mm - microUSB adapter for PMS7003 sensor
The adapter allows for signal transmission from the connector IDC 10 pin on the microUSB connector that allows to connect the sensor directly to the computer. The module is...
Index: DNG-13445
Index: DNG-13445
Gravity - BMI160 6DoF IMU - 3-axis accelerometer and gyroscope - DFRobot SEN0250
A 6-axis inertial motion sensor featuring the Bosch BMI160 MEMS chip. The module integrates a 16-bit 3-axis accelerometer and a 3-axis gyroscope . It is used to measure...
Index: DFR-19380
Index: DFR-19380
DFRobot Gravity - voltage divider 1/5
A voltage divider is used, when the measured voltage has a larger value than the range of A/D converter. The device works in the range from 0,0245 V to 25 V. The output...
Index: DFR-11261
Index: DFR-11261
Particle Sensor Breakout - MAX30101 - SparkFun SEN-16474
The sensor is based on a system MAX30101 and allows for the determination of the distance, pulse, smoke, and even blinking of an eye. It has 3 LEDs and a very responsive...
Index: SPF-08065
Index: SPF-08065
VCNL4010 - distance and light sensor 20cm I2C - Adafruit 466
A digital sensor measuring the distance ranging up to 20 cm and the intensity of the incident light. It communicates via the I2C bus (TWi), it works with a voltage of 3.3 V and...
Index: ADA-04969
Index: ADA-04969
DFRobot Gravity: Heart Rate Monitor Sensor For Arduino
Module for measuring heart rate of the human heart, compatible with Arduino. It works with voltage from 3.3 V to 6 V, the output is the analog or digital signal. The kit...
Index: DFR-07455
Index: DFR-07455
AC current sensor SCT 013-100 - to 100 A
The sensor providing the measurement of alternating current flowing in the pipeline without the need to pull off the isolation. The measurement occurs through the insulation on...
Index: OST-14262
Index: OST-14262
NTC 10kΩ thermistor with 3m cable
Thermistor of the NTC type with a resistance of 10 kΩ. The connecting cable has a length of 3 m.
Index: DNG-10930
Index: DNG-10930
BME680 multi-functional 4in1 environmental sensor - SPI / I2C - DFRobot SEN0375
A 4-in-1 MEMS multifunctional environmental sensor manufactured by DFRobot. It features an embedded BME680 chip. The module is a combination of a volatile organic compound...
Index: DFR-19199
Index: DFR-19199
Digital sensor allows to measure atmospheric conditions, i.e. temperature from -40 °C to 85 °C, humidity from 0 to 100 %Rh and pressure from 300 hPa to 1100 hPa . The last...
Index: SPF-04901
Index: SPF-04901
- On sale!
- Promotion
APDS9960 Proximity, Light, Color and Gesture Sensor - STEMMA QT/Qwiic - Adafruit 3595
The sensor, which can detect simple gestures, light of the surroundings, color and approaching obstacles. The device communicates with a microcontroller via the I2C bus. It...
Index: ADA-09815
Index: ADA-09815
Piezoelectric sensor of vibration with mass - SparkFun SEN-09197
Piezoelectric vibration sensor, used for measurements of touch, vibrations, hits and flexibility. A small AC voltage and high voltage of up to 90 V, it occurs when the foil...
Index: SPF-10116
Index: SPF-10116
DFRobot KIT0011 - set of 27 modules with cables for Arduino
A set of 27 popular modules compatible with Arduino boards. In the set are i.a.: distance, light, touch, rotation, vibration, gas sensor, and a module with LED, relay and more....
Index: DFR-04297
Index: DFR-04297
Grove - MMA7660FC 3-axis digital accelerometer I2C
Module with 3-axis accelerometer based on MMA7660FC chip with digital I2C output and Grove connector. The MEMS sensor has a low power consumption and low profile. The module...
Index: SEE-15444
Index: SEE-15444
- Reduced price
- Promotion