- Reduced price
- Promotion
- Reduced price
- Promotion
Fibaro Door/Window Sensor 2 - Z-Wave Plus - brown - FGDW-002-7
Index: FIB-23767
- Reduced price
- Promotion
- Reduced price
- Promotion
- Reduced price
- Promotion
- On sale!
- Promotion
Mini fan - Unit expansion module for development modules M5Stack
Index: MSS-18058
- Reduced price
- Promotion
Gravity series for Arduino - Strona 4
Loading...
DFRobot Gravity - analog signal isolator
The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
DFRobot Gravity - analogue meter of the sound level
The sound level meter is compatible with Arduino. For measurements, it uses the circuit instrument and the microphone with a low noise level that allows to accurately measure...
Index: DFR-10832
Index: DFR-10832
DFRobot Gravity - digital button Tact Switch - red
Digital monostable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-11277
Index: DFR-11277
DFRobot Gravity - I2C battery charge level meter
A module designed for reading the Li-Pol 3.7 V battery charge level in real-time. It is also equipped with alarm function when the battery level is low, or when battery power...
Index: DFR-12263
Index: DFR-12263
DFRobot Gravity: module with EEPROM memory - I2C - 256kB
Module EEPROM from series Gravity, allows for memory expansion on the data with 256 KB in Arduino. Communication via the I2S interface. It saves data during a power outage. The...
Index: DFR-13242
Index: DFR-13242
DFRobot Gravity: Digital shake sensor
The shock sensor reacts to movement in a certain direction, so it can detect, for example, a hand movement. It is equipped with a vibration switch, spring type which serves to...
Index: DFR-13294
Index: DFR-13294
Gravity - IoT starter kit for BBC micro:bit - DFRobot KIT0138
Starting set for the micro:bit minicomputer. Allows you to create simple IoT projects by novice users. The kit includes such elements as: BBC board micro:bit, extension board...
Index: DFR-15226
Index: DFR-15226
Gravity - DHT22 digital temperature and humidity sensor - DFRobot SEN0137
DFrobot's DHT22 digital humidity and temperature sensor module provides precise measurements and has a short response time combined with high reliability and resistance to...
Index: DFR-15760
Index: DFR-15760
Gravity - TRIG URM09 ultrasonic distance sensor - DFRobot SEN0388
Ultrasonic distance measuring module produced by DFRobot with integrated URM09 chip. It detects objects at a distance from 2 cm to 500 cm . The distance is determined...
Index: DFR-19194
Index: DFR-19194
Connection cable equipped with Gravity series connector, manufactured by DFRobot . Designed to connect digital peripherals (sensors) equipped with a Gravity connector to...
Index: DFR-19547
Index: DFR-19547
Gravity - Color Sensor TCS3430 Tristimulus - DFRobot SEN0404
Manufactured by DFRobot, this colour sensor features the TCS3430 Tristimulus chip. It offers the user advanced digital ambient light detection (ALS) and CIE 1931...
Index: DFR-19904
Index: DFR-19904
DFRobot Gravity - module with multiturn potentiometer 10kΩ/10obr.
The DFRobot module with 10-turn potentiometer with the resistance of 10 kΩ. The kit also includes a cable with a female connector, pitch of 2.54 mm.
Index: DFR-03906
Index: DFR-03906
DFRobot Gravity - Hall magnetic field sensor
The magnetic field sensor with digital output OH9249. It is supplied with the voltage of from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04714
Index: DFR-04714
DFRobot Gravity - 2x16 I2C LCD display with RGB backlight - for Arduino
LCD display 2x16 characters with backlight in any color palette RGB. It communicates with the two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion...
Index: DFR-09538
Index: DFR-09538
DFRobot Gravity - analog temperature sensor LM35
Analog LM35 sensor working with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. it can measure temperature in the range from 0 ℃ to 100 ℃. The...
Index: DFR-10842
Index: DFR-10842
- Reduced price
- Promotion
DFRobot Gravity - grayscale sensor
Analog grey sensor which is able to measure the light intensity from black to white. Scale of gray is also defined as black and white, with the darkest shade of gray as black...
Index: DFR-11255
Index: DFR-11255
- Reduced price
- Promotion
DFRobot Gravity v2.0 - relay 1 channel - 277VAC / 16A contacts - 5V coil
Module with relay that allow for the control of the actuators through the ports of the microcontroller. The kit includes a cable adapted to DFRobot IO Expansion Shield.
Index: DFR-11262
Index: DFR-11262
DFRobot Gravity - IR receiver 38kHz
The IR receiver from the Gravity series, operating at a frequency of 38 kHz with a voltage of 5 V. The module allows to receive commands from the IR transmitter. The...
Index: DFR-11267
Index: DFR-11267
DFRobot Gravity - 2x16 I2C LCD display - black with RGB backlight
LCD display 2x16 characters with black backlight, it can display the font in any colour from the RGB palette. Communicates with two-wire I2C bus. The kit includes a cable...
Index: DFR-12360
Index: DFR-12360
DFRobot Gravity - 2x16 I2C LCD display - gray
LCD display 2x16 characters with backlight in gray. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield.
Index: DFR-12364
Index: DFR-12364
Gravity - ozone sensor I2C - electrochemical - DFRobot SEN0321
Electrochemical ozone sensor for accurate O3 concentration measurement in the environment. Its measuring range is from 0 ppm to 10 ppm. It communicates via the I2C...
Index: DFR-16575
Index: DFR-16575
Gravity - Air Quality Sensor - SGP40 - DFRobot SEN0394
Air quality sensor manufactured by DFRobot. It has a built-in SGP40 chip (introduced by the well-known Sensirion company), which measures the VOC air quality in the range...
Index: DFR-19375
Index: DFR-19375
DFRobot Gravity Self-Locking Switch
Digital bistable switch with 3-pin connector. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules. Each press changes its status to opposite.
Index: DFR-06290
Index: DFR-06290
DFRobot Gravity: Voice Recorder Module
Vioce recorder module based on ISD1820. It has a built-in microphone and a jack connector for speakers or headphones. Built-in functions allow you to record and playback audio...
Index: DFR-07437
Index: DFR-07437