- On sale!
Description
Minicomputer UP with a processorIntel Pentium Quad Core N4200 64-bit with a clock frequency of 2.5 GHz. Tile has4 GB of LPDDR4 RAM,32GB eMMC, Intel HD Graphic 505 graphic processor,2 Gigabit Ethernet ports,HDMI port,2x USB 2.0 on pins GPIO,3 USB 3.0 ports + 1x microUSB 3.0 OTG,40 GPIO,SATA, RTC andCSI and DSI connectors. Works with the systemsAndroid, Windows 10 and Linux.
|
Minicomputer works with Windows 10 - license must be purchased separately. |
What it takes to run minicomputer UP?
- USB Disk - carrier that contains the system image to install.
- AC adapter:
- 5 V / 4 A only for the minicomputer
- HDMI cable- to connect the device to the monitor
- Mouse and keyboard - for control and input data into the device
Minicomputer UP works with the systems Android, Windows 10 Windows 10 IoT, ublinux, Ubuntu, and Yocto. The device has 64 GB of memory eMMC.
Operating system
Minicomputer UP board works with the systems Android, Windows 10, ublinux, Ubuntu, and Yocto. The kit does not have a Windows license, it must be purchased separately.
The installation of the Windows operating system is very simple, below are brief instructions:
- To install Windows, you will need an external USB hard drive of at least 4GB of capacity, for example,the Pendrive.
- On the disk, you need to create a Windows image - the image can be downloaded from the official Microsoft website. It can be created using any program that can be found on the Internet or using the tool MediaCreationTool created by the Microsoft - on the websiteMicrosoft, available is installation instructions and download file.
- Next, you need to connect the drive to a USB port on minicomputer. After connecting to the current, there should show, immiedately, the image of the installation.
- Before beginning the installation process, you must delete all partitions which are available on the disk of minicomputer.
- The manufacturer has prepareda package of driversdesigned for minicomputer UP board.
Communication
Minicomputer UP has the main communication interfaces which can be found in office computers of PC class. The user has at his or her disposal:
- 3 USB 3.0 connectorts + 1 microUSB 3.0 OTG, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number usingan external USB HUB.
- 2 Ethernet slots, that is the ability to directly connect to the network.
- GPIO x 40 pin + 60 EXHAT pin - outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of engines. Among them are the pins supporting interfaces: I2C, SPI and UART.
- SATA3- to connect hard drive
Power
As a power source, the system uses the DC connector 5,5 / 2,1 mm. Manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and an output current of the used adapter shall benot less than 4.0 A. In our assortment, you will finda special adapter.
Specifications and comparison
| Basic information | |
|---|---|
 |
|
| Model | UP Squared 4 GB / 32 GBIntel Pentium Quad Core |
| Edition | 2017. |
| Technical specification | |
| The core |
Intel Pentium Quad Core N4200 64-bit |
| Operating systems |
Android, Windows 10, ublinux, Ubuntu, Yocto. |
| Clock frequency | 2.5 GHz |
| RAM | 4 GBLPDDR4 |
| Memory | 32GB eMMC |
| GPIO slot |
Connector 40-pin (2x20 pin) pitch 2.54 mm 60-pin EXHAT |
| Power |
5.0 V / 4 A through the socket DC 5,5 /2,1 mm |
| Tile sizes | 85.6 x 90 mm |
| Interfaces | |
| USB interface |
3x USB 3.0 - slot type a + 1 x micro usb 3.0 OTG + 2 x USB 2.0 GPIO, on pins GPIO |
| Network interface | 2 ports Ethernet 10/100/1000 Mbps |
| The Wi-Fi Interface | - |
| Bluetooth | - |
| Camera | the CSI slot |
| Touchscreen display | slot for DSI |
| Video |
HDMI 1.4 b, EDB |
| Communication |
UART, SPI, I2C, GPIO, PWM, PCM / I2S. |
| The rest |
USB 3.0 OTG, 2x USB 2.0, as leads 10 pin, RTC battery, SATA connectors 3 the Power button |
Useful links |
