Description: Arduino Nano Every
A version of the popularArduino Nanotile. Every model is based onATMega4809 AVRprocessor with 20 MHz clock, equipped with 48 kB flash memory and 256 B EEPROM. The user has30 pins,15 on each side. The ATSAMD11D14A microcontroller is responsible for communication with PC.The board has dimensions 45 x 18 mm.
|
Offered board has soldered in leads. In our offer we also have a version without connectors. |
Arduino Nano Every.
Programming and possibilities of Arduino Nano Every.
Arduino Nano Every can be programmed viaArduino IDE, both onlineand offline.Microcontroller ATSAMD11D14Aworks asUSB - UART converter. On the 30 pins you can findGPIO, SPI, I2C, PWM, USART, DAC and ADCamong others. Power and RESET pins are also available.
Arduino Nano Every output.
Main features of Arduino Nano Every
Nano user has 14 digital pins, 6 PWM outputs and 8 analog pins available. Arduino Nano Every can be powered via microUSB port with 5 V or via V in with 6 V to 21 V.
| Pin | Designation | Type | Description |
|---|---|---|---|
| 1 | D13 | Digital | SPI, SCK, GPIO |
| 2 | + 3V3 | Power output | Power supply for external devices |
| 3 | AREF | Analogue | Reference pin, can be used as GPIO |
| 4 | A0 / DAC0 | Analogue | ADC input / DAC output, canbe used as GPIO |
| 5 |
A1 |
Analogue | ADC input,canbe used as GPIO |
| 6 | A2 | Analogue | ADC input,canbe used as GPIO |
| 7 | A3 | Analogue | ADC input,canbe used as GPIO |
| 8 | A4 / SDA | Analogue | ADC input,canbe used as GPIO |
| 9 | A5 / SCL | Analogue | ADC input,canbe used as GPIO |
| 10 | A6 | Analogue | ADC input,canbe used as GPIO |
| 11 | A7 | Analogue | ADC input,canbe used as GPIO |
| 12 | +5 V | Power output | Power supply for external devices |
| 13 | RST | Digital input | Active reset |
| 14 | GND | Power supply | Mass |
| 15 | VIN | Power supply | Power supply |
| 16 | TX | Digital | USART TX,canbe used like GPIO |
| 17 | RX | Digital | USART RX,canbe used like GPIO |
| 18 | RST | Digital | Active reset |
| 19 | GND | Power supply | Mass |
| 20 | D2 | Digital | GPIO |
| 21 | D3 / PWM | Digital | GPIO,canbe used like GPIO |
| 22 | D4 | Digital | GPIO |
| 23 | D5 / PWM | Digital | GPIO,canbe used like GPIO |
| 24 | D6 / PWM | Digital | GPIO,canbe used like GPIO |
| 25 | D7 | Digital | GPIO |
| 26 | D8 | Digital | GPIO |
| 27 | D9 / PWM | Digital | GPIO,canbe used like GPIO |
| 28 | D10 / PWM | Digital | GPIO,canbe used like GPIO |
| 29 | D11 MOSI | Digital | SPI MOSI,canbe used like GPIO |
| 30 | D12 / MISO | Digital | SPI MISO,canbe used like GPIO |
Specifications of Arduino Nano Every
- Supply voltage: 6 V to 21 V
- Microcontroller: ATMega4809
- Clock: 20 MHz
- Flash memory: 48 kB
- SRAM 6 kB
- EEPROM 256 B
- Digital pins: 14
- PWM pins: 6
- Analogue pins: 8
- MicroUSB socket
- Interfaces: GPIO, SPI, I2C, USART, PWM
- Transducers: ADC, DAC
- Dimensions: 45 x 18 mm
Useful links |
