Description
MiniQ chassis - 2WD is a 2-wheeled platform for building a mobile robot. Included are two micro DC motors with wheels and special mounting components. Elements of the chassis are made of plastic and have holes that allow you to mount various sensors, controllers, e.g. Romeo, Arduino or Raspberry Pi.
The platform is simple to install, you just need to follow the included illustrated instructions. To run the robot, simply install the motor, install the wheels and add any robot controller (e.g. Arduino Uno with Romeo V2 motors driver L298). The power source can be 4 AA batteries, a battery container is included. In our offer we also have sensors that can extend the robot's capabilities.
Set includes
- Mounting platform with diameter 122 mm
- Two wheels with tires with a diameter of 42 mm
- Two micro DC motors with gearboxes
- Two mounts for motors
- Two ballcasters
|
Set requires self-assembly, instruction videos can be found on YouTube. |
Specification
- Engines
-
- Voltage motor power supply: 3 V to 6 V
- Reducer: 50:1
- The parameters for the power 6:
- Current consumption without load: 40 mA
- Torque: 0.8 kg*cm (0,078 Nm)
- The revs at the gearbox output no-load: 260+/- 10 rpm
- The current consumption of the motor with a stationary shaft: up to 360
- Engine dimensions: 24 x 10 x 12 mm
- Engine weight: 10 g
- Wheels:
- Diameter: 42 mm
- Width: 20 mm
- Rubber tires with tread
- Design
- The outer platform diameter: 122 mm
- The gap between platform and ground: approx. 15 mm
- Eeight: 105 g
Installation manual for platform DFRobot MiniQ 2WD.
Useful links |
