DFRobot Gravity - analogue turbidity sensor

Index: DFR-05318 EAN: 5903351243506

Sensor for testing the quality of water by measuring its turbidity. Operates at 5 volts at temperatures from -30°C to 80°C.

€10.83
€8.80 tax excl.
Available, 24 hours shipping!
Check quantity
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Product description: DFRobot Gravity liquid turbidity sensor analogue

A sensor that tests water quality by determining the level of turbidity. It detects particles suspended in water by measuring light transmittance and propagation rate, which changes as the total suspended solids (TSS) increases. The greater the TSS, the greater the turbidity level.

Czujnik zmętnienia cieczy analogowy - moduł DFRobot

Turbidity sensors are used, for example, to measure water quality in rivers, streams, to measure wastewater and in laboratory instruments.

Product compatible with Arduino

Example code and detailed information can be found in the user guide.

DFRobot GravitySpecifications

  • Supply voltage: 5 V DC
  • Operating current: up to 40 mA
  • Response time: less than 500 ms
  • Isolation resistance: 100 M
  • Two output signal modes:
    • Analog: voltage from 0 V to 4.5 V
    • Digital: low and high state - switching level can be adjusted using built-in potentiometer
  • Operating temperature: from -30°C to 80°C
  • Weight: 30 g
  • Probe dimensions: 28 x 34 mm
  • Module dimensions: 28 x 38 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

Arduino Uno Rev3 - module A000066

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
Check quantity
Regular price €21.48 Price €21.48

Genuino Uno Rev3

A popular module with AVR ATmega328 microcontroller in a replaceable housing. It has 32 kB of Flash memory, 2 kB of RAM, 14 digital inputs/outputs of which 6 can be used as PWM...
Index: ARD-05314
Index: ARD-05314
Unavailable
Regular price €20.62 Price €20.62
  • EOL

Customers who bought this product also bought:

Grove - a set of 5 wires 4-pin 2mm - male cables 2.54mm/20cm

A set of five wires 4-pin Grove male wires 2.54 mm. They are used to connect Grove sensors with boards incompatible with the Grove raster 2.54 mm wires, for example Arduino.
Index: SEE-04402
Index: SEE-04402
Delivery scheduled for 2022-06-28
Regular price €3.26 Price €3.26

Infrared receiver TSOP2236 - 36 kHz

IR receiver TSOP2236, it is operating at a frequency of 36 kHz  with a voltage from 4.5 V to 5.5 V.
Index: SES-00181
Index: SES-00181
In stock, shipping 24 hours!
Check quantity
Regular price €0.54 Price €0.54

Step-Up/Step-Down Voltage Regulator S7V7F5 - 5V 1A - Pololu 2119

Miniature impulse converter module supplied with the voltage in the range: from 2.7 V to 11.8 V. The output voltage is set at 5 V. Maximum current 1 A. Dimensions: 9 x 12 x 3...
Index: PLL-00941
Index: PLL-00941
Available, shipping 24h!
Check quantity
Regular price €16.04 Price €16.04

THT CF carbon resistor 1/4W 4,7kΩ - 30pcs

Set of 30 1/4 W resistors . The elements are mounted in THT chrono housing.
Index: PAS-03973
Index: PAS-03973
Waiting for confirmation of delivery date
Regular price €0.41 Price €0.41

Linaer voltage regulator LDO 3,3V LF33CV - THT TO220 - 5pcs

The LDO LF33CV stabilizer is used to supply circuits operating at 3.3 V. Maximum output current is 0.5 A. Price for 5 pcs.
Index: UCC-00126
Index: UCC-00126
Available, 24 hours shipping!
Check quantity
Regular price €3.15 Price €3.15

Electrolytic capacitor 1000uF/25V 10x17mm 105C THT - 5pcs

Through hole electrolytic capacitor of 1000 uF / 25 V. Pins' pitch: 5 mm. Size: Ø10 x 17 mm. Price is for 5 pieces.
Index: PAS-00135
Index: PAS-00135
In stock, shipping 24 hours!
Check quantity
Regular price €0.43 Price €0.43

Electrolytic capacitor 10uF/50V 5x11mm 105C THT - 10pcs

Through hole electrolytic capacitor of 10 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00211
Index: PAS-00211
In stock, shipping 24 hours!
Check quantity
Regular price €0.22 Price €0.22

Electrolytic capacitor 1uF/50V 5x11mm 105C THT - 10pcs

Through hole electrolytic capacitor of 1 uf / 50 V. Pins' pitch: 2.5 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00298
Index: PAS-00298
In stock, shipping 24 hours!
Check quantity
Regular price €0.33 Price €0.33

Electrolytic capacitor 100uF/35V 6x12mm 105C THT - 10pcs

Through hole electrolytic capacitor of 100 uF / 35 V. Pins' pitch: 2.5 mm. Size: Ø6 x 12 mm. Price is for 10 pieces.
Index: PAS-00898
Index: PAS-00898
In stock, shipping 24 hours!
Check quantity
Regular price €0.33 Price €0.33

Electrolytic capacitor Low ESR 10uF/50V 5x11mm 105C THT - 10pcs

The ectrolytic through hole capacitor of low impedance (LOW ESR) 10 uF / 50 V. Pins' pitch: 2 mm. Size Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-01224
Index: PAS-01224
Goods pending acceptance - available within a few days
Regular price €0.54 Price €0.54

Set of resistors for CF THT 1/4W LED diodes - 90pcs.

Set of 3 values of 30 through hole resistors used for LEDs. Thanks to the values of 220 Ω, 470 Ω and 1.2 kΩ, the user can choose the desired brightness of the LED.
Index: PAS-01511
Index: PAS-01511
In stock, shipping 24 hours!
Check quantity
Regular price €1.06 Price €1.06

Bipolar transistor NPN 2N3904 40V/0,2A - 5pcs

Bipolar transistor NPN, 40 V, 0.2 A. Pinout ECB. Price for 5 pieces.
Index: UCC-01775
Index: UCC-01775
In stock, shipping 24 hours!
Check quantity
Regular price €0.21 Price €0.21

Products from the same category

Gravity - DHT22 digital temperature and humidity sensor - DFRobot SEN0137

DFrobot's DHT22 digital humidity and temperature sensor module provides precise measurements and has a short response time combined with high reliability and resistance to...
Index: DFR-15760
Index: DFR-15760
Available, 24h shipping!
Check quantity
Regular price €6.92 Price €6.92

Gravity: Analog Liquid Level Sensor (FS-IR02)

Photoelectric liquid's level sensor. It has high sensitivity without the need to use the mechanical parts. The probe withstands high temperature and high pressure.
Index: DFR-06612
Index: DFR-06612
In stock, shipping 24 hours!
Check quantity
Regular price €8.01 Price €8.01

DFRobot Gravity: Non-contact Liquid Level Sensor

The sensor determines the liquid level without dipping into the liquid. Due to the lack of contact with the liquid, the module is suitable for level measurement of hazardous...
Index: DFR-06931
Index: DFR-06931
In stock, shipping 24 hours!
Check quantity
Regular price €13.43 Price €13.43

DFRobot Gravity - digital barometer, pressure and altitude sensor 1250hPa I2C/SPI 3,3-5,5V

Module with digital barometer from Bosch BMP388. The measurement range is from 300 hPa to 1250 hPa relative accuracy of 8 Pa on approx. 0.5 m of altitude. The system is...
Index: DFR-13156
Index: DFR-13156
In stock, shipping 24 hours!
Check quantity
Regular price €7.79 Price €7.79

DFRobot Gravity - analog sensor of TDS, purity of water for Arduino

Analog TDS sensor compatible with Arduino, it is used for measuring the hardness and the purity of water. It can be used to test the quality of water in households, hydroponic...
Index: DFR-10830
Index: DFR-10830
In stock, shipping 24 hours!
Check quantity
Regular price €14.08 Price €14.08

Gravity Temperature & Humidity Sensor - DHT20 - DFRobot SEN0497

Precise temperature and humidity sensor equipped with DHT20 chip. Factory calibrated, has a connector compatible with the Gravity series. Product manufactured by DFRobot, is...
Index: DFR-20376
Index: DFR-20376
Available
Check quantity
Regular price €8.01 Price €8.01

DFRobot Gravity - DS18B20 temperature sensor

Digital temperature sensor DS18B20 with the Gravity interface compatible with Arduino. It works in the range from -55 °C to 125 °C. It is powered with the voltage from 3.3 V...
Index: DFR-11281
Index: DFR-11281
In stock, shipping 24 hours!
Check quantity
Regular price €6.29 Price €6.29

DFRobot Gravity - water vapor sensor

The vapor sensor is compatible with Arduino. When the humidity increases, output voltage increases. It can be used in projects such as a rain detector or touch sensor based on...
Index: DFR-11285
Index: DFR-11285
In stock, shipping 24 hours!
Check quantity
Regular price €1.63 Price €1.63

Gravity - Analog Waterproof Capacitive Soil Moisture Sensor V2.0 - DFRobot SEN0308

The device is designed to measure soil moisture by means of capacitive detection. DFRobot product has increased water resistance . It can be placed in the soil for a long...
Index: DFR-17377
Index: DFR-17377
Waiting for confirmation of delivery date
Regular price €19.31 Price €19.31

DFRobot Gravity - pH analog sensor/meter

Analog pH meter with an analgue output. Allows to measure water quality. It has an accuracy of +/- 0.1 pH, which is sufficient for most applications. Equipped with LED, BNC...
Index: DFR-05874
Index: DFR-05874
Available, 24 hours shipping!
Check quantity
Regular price €31.68 Price €31.68

DFRobot Gravity - analog soil moisture sensor - corrosion resistant - SEN0193

The device is used to measure soil moisture by the capacitive detection. It has a built-in voltage regulator which provides an operating voltage range from 3.3 V to 5 V. It is...
Index: DFR-10305
Index: DFR-10305
In stock, shipping 24 hours!
Check quantity
Regular price €6.92 Price €6.92

DFRobot Gravity - analog soil humidity sensor

The device is used to measure the soil moisture by measuring the resistance, compatible with Arduino and Raspberry Pi. The supply voltage is from 3.3 V to 5 V. The sensor is...
Index: DFR-11259
Index: DFR-11259
In stock, shipping 24 hours!
Check quantity
Regular price €3.02 Price €3.02