Smoothing device - Polymaker PM70524

Index: PLM-22750 EAN: 6938936701798
A small, intelligent device used to smooth the surface of the finished print, made of PolySmooth filament by Polymaker. The produced mist of isopropyl alcohol (IPA) gently dissolves and connects the layers of the model, thanks to which it gains a smooth and shiny finish . Isopropyl alcohol is not included.
Smoothing device - Polymaker PM70524
€396.50
€322.36 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Polymaker

Product description: Polysher print smoothing device - Polymaker PM70524

A small, intelligent device used to smooth the surface of the finished print, made of PolySmooth filament. The Layer-Free technology used by Polysher consists in creating a mist of isopropyl alcohol (IPA) that gently dissolves and connects the layers, smoothing the printout. The time needed for smoothing depends on the size of the model and ranges from 20 to 40 minutes . The Polymaker device is ideal for creating toys or decorations and will give them a smooth and shiny finish .

Polysher works only with isopropyl alcohol (not included). Other solvents may damage the device.

Polisher at work.

Polysher print smoothing device - Polymaker PM70524.

Main features of the Polysher print smoothing device

  • Works with PolySmooth filament
  • Gives prints an even, glossy surface
  • It uses Layer-Free technology
  • Smoothes prints with a fine mist
  • Works exclusively with isopropyl alcohol

Security system

The process of smoothing printouts takes place under a sealed chamber . This will prevent any fumes from escaping. In addition, the alcohol used by Polysher is not heated but turned into a fine mist, which also increases user safety. However, despite the security system, Polysher should be used in a well-ventilated room so that in the event of a failure, the user is not exposed to inhalation of hazardous substances.

Polysher is great for creating toys or decorations.

Polysher is a very easy-to-use device.

Technical specification of the Polysher print smoothing device

  • Supply voltage: 5V ~ 2000mA
  • Maximum print dimensions: 150 x 180 mm (W x H)
  • Duration of smoothing: from 20 to 40 minutes
  • Storage temperature: 0°C to 38°C
  • Device dimensions: 230 x 300 x 360 mm
  • Weight: 4 kg

Kit contents

  • Polysher print smoothing device
  • Nebulizer - 2 pcs.
  • Platform for prints - 2 pcs.
  • Tank cover
  • Tank lid with grille
  • Pipette
  • AC adapter 100 - 240V, 50 / 60Hz, 0.4A

Package width 40 cm
Package height 50 cm
Package depth 36 cm
Package weight 6.8 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: